What kind of valve covers does a Ford F-150 have?
The valve covers are aluminum and the intake manifold made of composite material. All 5.4L V8s were equipped with individual coil-on-plug electronic ignition system and electronic sequential multi-port fuel injection. The 5.4 2V engine was produced at the Windsor Engine Plant in Windsor, Ontario.
What is the warranty on a Ford 3 valve engine?
Our Ford 5.4 3 valve engines are built to meet or exceed the original OEM specifications and are backed by our industry leading 3-year/unlimited mileage warranty. Promar takes every step necessary to supply the best rebuilt/remanufactured engine available. Some of these steps include:
What are Ford engines?
Ford engines are those used in Ford vehicles and in aftermarket, sports and kit applications.
What kind of engine does a Ford SVT Lightning have?
Ford SVT Lightning 5.4L engine. This 5.4-liter supercharged engine produces 380 hp (283 kW) and 310 ft-lb (610 Nm) of torque. Ford F-150 Harley Davidson Edition. This 2002-2003 model was equipped with 5.4L supercharged and intercooled V8 engine.
What years did Ford make the 5.4 3 valve?
When Ford introduced the single overhead cam 5.4L 3V Modular V-8 in 2004 in the redesigned F-Series trucks and the 4.6L 3V in the all-new '05 Mustang GT, it was viewed as an upscale compromise between the 2V Modular and the mighty DOHC-4V Cobra and Mach 1 engines.
What year did Ford start the 3 valve?
The 3-valve SOHC 4.6 L with variable camshaft timing (VCT) first appeared in the redesigned 2005 Ford Mustang.
Is the 5.4 3 valve a good engine?
Anyways, the 5.4L Triton is a pretty reliable engine. Keep up with maintenance and repairs as they pop up, and chances are the 5.4 V8 will hold up beyond 200,000 miles. There's a reason Ford stuck with these engines for roughly 2 decades.
What year was the best 5.4 engine?
2009-2010 Triton 5.4L The 5.4-liter V8 improved in 2009, fixing the cam phaser issues and all but eliminating the spark plug problems. With 300 horsepower and 365 lb-ft of torque, the Triton 5.4L is one of the most reliable F150 engines.
What is the difference between a 2 valve and a 3 valve engine?
1 Answers. Generally 3 valve engine has 2 intake & 1 exhaust valves compare to 1 intake & 1 exhaust valve of a 2 valve engine. These valves are smaller & light weight compared to that of 2 valve engine.
What are the problems with a 5.4 Ford engine?
Ford's 5.4L V8 engine has also had some ongoing issues with its fuel pumps, particularly in the 2006 Ford F-150. One complaint on the NHTSA page was filed in 2017 and reports that the fuel pump control module became corroded, causing the engine on the truck to stall completely.
How long will a 5.4 3v last?
If properly maintained, the Ford 5.4 Triton engine will last between 150,000 and 300,000 miles. Getting to these mileage milestones will require you to: Regularly maintain the vehicle. Act quickly to replace defective parts.
What years did the 5.4 Triton have spark plug problems?
When did Ford fix the 5.4 spark plug issue? As the 5.4L engines were built in 2004, it caused issues in models from 2004 – 2006, but by 2007/2008 it was said to have been repaired by Ford.
How many valves does a 5.4 Triton have?
3 valvesFord 5.4L Triton Engine - SpecificationsMetricValueBore90 mmStroke106 mmCompression ratio9.0:1 (2 valves) / 9.8:1 (3 valves)Max power @ RPM550 @ 6,500 rpm4 more rows
What year F150 to avoid?
What year F-150 to avoid? Amongst Ford enthusiasts, there is one year that people know to avoid with the F-150 and that is the 2004 model year. These are considered to be the worst F-150 trucks that were ever made for a few different reasons.
What is the best Ford engine ever made?
The 7 Best Engine Ford Ever MadeFord's Flathead V8 Engine.289 V8 Small Block Engine.Ford 428 Cobra Jet Engine.Ford Boss 429 Engine.EFI HO 5.0 Engine.Voodoo V8.Ford Eco-Boost Engines.
How many miles per gallon does a 5.4 Triton get?
2004 Ford F150 Pickup 4WDVehicleEPA Fuel EconomyEnergy Impact Score2004 Ford F150 Pickup 4WD 5.4 L, 8 cyl, Automatic 4-spd, Regular Gasoline14 MPG 13 17 combined city/hwy city hwy 7 gal/100 mi21.3 barrels/yr364 - 420 miles Total Range2004 Ford F150 Pickup 4WD 5.4 L, 8 cyl, Automatic 4-spd, Regular Gasoline11 more rows
What year did the 5.4 2v come out?
Dating back to 1997, when Ford first installed the 2-valve 5.4L into the Ford F-150 pickup truck, this engine was marketed as a Triton V-8.
What does a 3 valve mean?
The 3 valve technology incorporates a total of three valves, two each of the inlets and one exhaust valve in the engine. Thus, it is different and better than one valve for each inlet & exhaust valve used in the conventional engine design. The engine uses its valves just like humans use a nose.
When did the Ford 5.4 come out?
The earliest release of the Ford 5.4 engine does not come with four valves but a 2-valve instead. This engine was introduced in 1997 and shared the same bore as the 4.6 version but with a longer piston stroke. On top of that, the block deck height is taller due to the demands of a longer stroke.
Where were the 5.4 Triton engines built?
The 2-valve 5.4 Triton engines were built at the Windsor Engine Plant until Ford moved the production to the Essex Engine plant starting in 2003. However, Ford took back the decision, and the production was taken took the Windsor plant again in 2009. The high-performance 4-valve engines were built at the Romeo engine plant and were hand-assembled.
What year did the Ford Fairmont 5.4 Barra 220 come out?
The engine’s first application was on the 2002 Ford Fairmont under the name of the 5.4 Barra 220 engine in Australia. In North America, the engine was launched alongside the redesigned 2004 Ford F-150 model. It received a lot of improvements not only on the number of valves but also performance-wise.
What is the compression rating of 5.4 Triton?
The 3-valve 5.4 Triton has restyled cylinder heads with two intake valves and a large exhaust valve per cylinder. It has a higher compression rating of 9.8 and a bigger oil capacity. This engine was assembled at the Essex engine plant at first but was moved to Windsor Engine Plant.
What is a 5.4 Triton?
The Ford 5.4 V8 Triton is a member of Ford’s Modular V8 engine series that replaced the 5.8L. It was a naturally-aspirated, eight-cylinder gasoline engine introduced in the Ford F150 in 1997. It is a naturally-aspirated engine with eight cylinders. It is sometimes addressed as the stroked version of the 4.6 Triton due to its almost similar features and builds.
What is the bore diameter of a Ford 5.4 Triton?
The Ford 5.4 Triton engine has a bore diameter of 90.2 mm and a piston stroke of 105.8 mm. Due to its increased stroke length, the design of the engine block was made to accommodate the change. In line with that, the connecting rods used were also lengthened to achieve the 1.60:1 rod to stroke ratio.
What is the problem with the 5.4 Triton?
The most common and widely recognized issue of the 5.4 Triton engine is the engine’s faulty ignition system. It is hard to have this issue because you’ll never know when it will strike, and it is pretty annoying. With that, the issues regarding the ignition system of the 5.4 V8 affected the horizon of all engines.
Where is the 5.4 engine made?
The 5.4 2V engine was produced at the Windsor Engine Plant in Windsor, Ontario. The 5.4 3V version was first introduced in Australia and used on the 2002 Ford Fairmont under the name Bara 220. On the North American market, that engine debuted together with the redesigned 2004 Ford F-150 model. Ford 5.4L Triton 3 valve engine has redesigned cylinder ...
What is a 5.4 liter engine?
Ford 5.4L V8 Triton Engine Review. The Ford 5.4 Triton V8 is a part of Ford's Modular V8 engine family, a 5.4-liter naturally aspirated eight-cylinder gasoline engine, which was first introduced in the 1997 Ford F150. The 5.4 engine basically is a stroked version of the 4.6-liter version since the architecture of both engines is very similar.
What are the problems with a 5.4 Triton engine?
Like Ford's 4.6L V8s, the Modular 5.4L Triton engine has similar common problems for their engine family, which included blowing spark plugs and spark plug threads stripping (1997-2003 model years), stuck spark plugs due to a gap between the plug and the cylinder head which gets filled with carbon deposits (typical for 2004+ model years), and intake manifold cracking and leaking ( poor design of plastic intakes). But it should be noted that these problems cannot be called widespread, and 5.4 Triton V8s have earned a good reputation in terms of reliability and longevity among the majority of owners.
How many miles does a 5.4 Triton engine last?
With proper fluid changes and regular, scheduled maintenance, any 5.4-liter Triton engine will serve well over 200,000 miles (320,000 km).
How many valves are in a SOHC?
On top of each cylinder bank, there is a SOHC aluminum head with two valves per cylinder. There are two timing chains at the front, one for each camshaft. The valvetrain features roller finger followers and hydraulic lash adjusters. The valve covers are aluminum and the intake manifold made of composite material.
When did the last Triton 5.4 leave the plant?
But the last 5.4 Triton 3-valve engine left Essex Plant in 2008 and then the production was moved to the Windsor Engine Plant.
What was the first engine?
The first engine, introduced in 1997, was a SOHC 2-valve 5.4L V8. It has a cast iron cylinder block. While the engine shared the bore diameter with a 4.6L version, the increased stroke demanded a taller engine block deck height - 10.079 in (256.0 mm) compared to 8.937 in (227.0 mm). The internal components include fracture-split powder metal ...
What is a Ford engine?
Ford engines are those used in Ford vehicles and in aftermarket, sports and kit applications. Different engine ranges are used in various global navistar markets.
When did Ford start making six cylinder engines?
Ford was late to offer a six-cylinder engine in their cars, only introducing a six in 1941 after the failure of the 1906 Model K. The company relied on its famous Flathead V8 for most models, only seriously producing six-cylinder engines in the 1960s. The company was also late with a V6 engine, introducing a compact British V6 in 1967 but waiting until the 1980s to move their products to rely on V6 engines. The company has relied on six major V6 families ever since, the Cologne/Taunus V6, Essex V6, Canadian Essex V6, Vulcan V6, Mondeo V6 and Cyclone V6. The first three of these lines are no longer in production, leaving only the Mondeo and Cyclone as the company's midrange engines.
What is a 3.2L Duratorq?
2015–present; The 3.2 is an I5 engine used in the Ford Transit, the Ford Ranger, Ford Everest, Mazda BT-50 and the Vivarail. For the North American-spec Transit, * the 3.2L Duratorq is modified to meet American and Canadian emissions standards and is branded as a Power Stroke engine.
What year did the Fork and Blade V8 have a piston?
The Fork and Blade V8 used a novel approach for the piston connecting rods, which meant two connecting rods shared one bearing on the crankshaft, which allowed for a short crankshaft and a smaller overall engine size. 1932–1953 Flathead V8. 1940–1950 Ford GAA engine, exclusively for armored fighting vehicle military use.
When did Ford introduce the flathead V8?
Ford introduced the Flathead V8 in their affordable 1932 Model 18, becoming a performance leader for decades. In the 1950s, Ford introduced a three-tier approach to engines, with small, mid-sized, and larger engines aimed at different markets. All of Ford's mainstream V8 engines were replaced by the overhead cam Modular family in the 1990s and ...
What is a 2.5 Duratec?
2004-2011;The 2.5 Duratec is an inline 5 engine used in the Ford Focus ST225,Kuga,S-Max ST and various Volvo T5 models.It features DOHC, 20 valves and Ti-VCT.It displaces 2521cc and produces 166 kW (225hp) and 320 N.m (236lb.ft) in the ST or 227 kW (305hp) and 440 N.m (324.5lb.ft) in the Focus RS, or even up to 257kW (345hp) and 460 N.m (339lb.ft) in the RS500