What is the difference between Moen cartridge 1200 and 1225?
The main difference between the Moen 1225 and the Moen 1200 cartridges is that the Moen 1225 cartridge is the newer version of the 1200 cartridge. Moen 1225 cartridge has a clear plastic shell and a brass piston while the Moen 1200 cartridge has a brass shell and piston. As I had mentioned before, the easiest way to know which cartridge you need between the Moen 1222 and the Moen 1225 is how the faucet turns on the water. Faucets with the Moen 1225 cartridge allows you control the water ...
Are all Moen cartridges the same?
Likewise, are all Moen shower cartridges the same? There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number.
Where to buy Moen cartridges?
Product Overview
- MOEN genuine part
- Replaces most moen 2-handle cartridges
- Designed to fit most moen 2-handle faucets
- Will not fit moen roman tub faucets
- Also works in 2 and 3-handle tub/showers
- Installation instructions included
How to replace Moen kitchen faucet cartridge.?
Preparation:
- The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet.
- Recommended Tools: Pliers
- The following instructions assume the handle and associated handle pieces have been removed. For additional details, visit solutions.moen.com and select the type of faucet you are repairing. ...
How do I know what Moen cartridge I need?
0:063:58Old plumber shows tips and tricks on moen faucets. Choosing the right ...YouTubeStart of suggested clipEnd of suggested clipSimply by going to your faucet years ago go into your faucet. And pull them pulling. On yourMoreSimply by going to your faucet years ago go into your faucet. And pull them pulling. On your cartridge if the handle pulls out it's a 12 25 cartridge.
Do all Moen faucets have the same cartridge?
If you bought your Moen shower faucet setup after 2009, you will have either a 1225 or 1255 cartridge in a vast majority of the cases.
Are all Moen bathroom faucet cartridges the same?
The faucet guide will contain specific information on handle assemblies associated with that style of product. Moen has used different cartridges over the years. If you are unsure of what faucet you have please click Identify My Product.
Are Moen 1225 and 1225b the same?
Q:What is the difference between 1225 B cartridge and 1225 ? A: According to Moen, they are the same cartridge. There used to be a difference in the packaging (bulk pack vs retail pack), but the packaging is even the same now.
How do I find my Moen valve number?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
What is the difference between Moen 1222 and 1225?
The biggest difference between the Moen 1222 vs 1225 cartridges is how the shower valve handle turns the water on. Shower valves with the Moen 1225 cartridge are turned on by pulling the handle out and then adjusting the temperature by turning the handle to the left or right for hot or cold water.
How can I get a free Moen cartridge?
0:133:18FREE Moen Replacement Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can stop here if you want but if you need a little more info i actually recorded the promptsMoreSo you can stop here if you want but if you need a little more info i actually recorded the prompts that you have to take to get to a live person in order to get your replacement.
How does Moen 1222 cartridge work?
1:344:45HOW A MOEN 1222B POSI-TEMP CATRIDGE WORKS - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside of this cartridge that cylindrical bearing we're talking about will lift and turn. And itMoreInside of this cartridge that cylindrical bearing we're talking about will lift and turn. And it will position itself to wherever you have that water demand coming in whether it's cold.
Are faucet cartridges interchangeable?
Cartridges aren't interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer's website in the online version of the owner's manual for your faucet.
Are all Moen Posi Temp valves the same?
For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable.
How do I know what cartridge fits my shower?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12).
How do you replace a Moen 1225 cartridge?
0:222:23Moen 1225 Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's also important that the cartridge stem is lined up properly. One side has a vent hole. And forMoreIt's also important that the cartridge stem is lined up properly. One side has a vent hole. And for kitchen and lab installations. The vent hole should be in the 6 o'clock position.
What are Moen cartridges made of?
Standard cartridge models are made from corrosion-free materials for even greater longevity. Moen's standard cartridges are built from three main parts — the cartridge sleeve, the cartridge valve stem and O-rings, which are assembled into a single unit for ease of use. The sleeve serves as the outer shell and includes ports allowing hot ...
When was the Moen 1225 faucet made?
Introduced in 1981 and used in Moen one-handle kitchen faucets launched prior to 2009 and Moen one-handle lavatory faucets launched prior to 2011. The 1225 fits all one-handle non-pressure balanced tub/shower valves as well as Moentrol® tub/shower valves.
What is the O ring on a faucet?
O-rings surround the sleeve to seal the cartridge within the faucet. The cartridge valve stem is the moving piece inside the sleeve that is connected to the faucet handle and changes the mix between hot and cold and sometimes flow.
What cartridges are used in a one handle faucet?
For One-Handle Kitchen and Bath Faucets. The original Moen cartridge, the 1200 provided one-handle operation. It was used in all one-handle faucets, except the Posi-Temp shower valve, prior to the introduction of the 1225 in 1981.
What is a standard cartridge?
Standard cartridges are designed for faucets, Roman tubs and tubs/showers.
Can you replace a Moentrol 1200 with a 1225?
There is no repair kit available for the 1200 cartridge, it can be replaced with a new 1200 or a 1225 cartridge. If the application is Moentrol® 3-function vertical spa transfer valve, then it can be replaced with the 116719 cartridge.
How to find the serial number of a Moen cartridge?
If you can’t find the serial number on the faucet’s underside, check the decorative escutcheon ring that’s included with every Moen unit.
How long does a shower cartridge last?
For the most part, a single cartridge valve should last for at least a decade, if not more. However, there are times where you may need to replace them. If you notice that your shower can’t regulate temperature or pressure the way it once did, you will need to replace the cartridge.
What is a shower valve cartridge?
A shower valve cartridge is the fastest and most precise way to control your shower’s temperature. The engineers at Moen knew that and made a point of using them to improve the output of their shower valve faucet.
How much does it cost to replace a cartridge valve?
However, the cost of labor alongside the parts will quickly add up. Labor costs for a cartridge valve replacement can range from $100 to $250 alone. Parts will cost between $50 and $100, depending on what needs to be bought to do the job. The numbers add up pretty quickly.
Can shower cartridges fit in a shower?
They won’t fit, and even if they do, they won’t actually function. It’s worth noting that shower cartridges aren’t even interchangeable within the brand in most cases. You need to get the cartridge that’s specially made for your shower handle model if you want to be able to use it.
Can you use an off brand shower faucet?
Due to the way that shower faucets are designed, you cannot use an off-brand cartridge valve. If you try, you’re going to find out that it won’t fit and you’ll need to return it. (No, it has nothing to do with your shower dimensions. It’s a plumbing issue.)
Does Moen have cartridge valves?
What you need to realize is that using cartridge valves are not exclusive to Moen in the least bit. Any shower faucet that uses a single handle is going to require a cartridge valve or something similar to function.
What is a Moen 1225 cartridge made of?
To ensure durability, the Moen 1225 cartridge is made of brass. This gives it a strong and durable finish. Brass is a material that does not get damaged easily. Moreover, since the valve system will frequently come in contact with water, there is a possibility of rust formation.
What is the difference between a Moen 1225 and a Moen 1225b?
Q: What is the main difference between a Moen 1225 and a Moen 1225b cartridge? Ans: Although both the models are identical in terms of their features, the 1225 model is made of brass, whereas the 1225b model is made of plastic.
What puts the Moen 1225B ahead of the 1225B?
Once the life of a cartridge ends, it needs to be removed to be replaced with another. What puts the Moen 1225b ahead of the 1225 model is its ease of removal. Since the first model is made of plastic, it does not get stuck on the valve housing for which it is easier to remove.
What is a 1225 valve made of?
On the other hand, the 1225 model is made of brass, and prolonged use causes calcium deposition on it. This makes it stuck on the valve housing, and you might have to replace the entire valve body to get rid of the brass cartridge.
How does a product determine its life?
It also plays a huge role in its performance. If the construction of a product is made with quality items, then it lasts for a long time and gives the user a smooth experience.
Can you use a Moen 1225 cartridge on a faucet?
In that case, you can use the Moen 1225 cartridge on it as a replacement valve and solve your problem.
Does a Moen faucet cartridge get rusted?
Since this valve system is made of brass, it does not get rusted and remains in good condition for a long time.
