Sure so much “urethane” reducers are going to be very comparable yet to claim they are an analogous and may be used with different manufacturers and labels is just wrong and might get somebody into trouble. Follow the goods on the product information sheet for the paint/primer/clear you are taking pictures and you will ALWAYS be bigger off.
Full Answer
What is the difference between a urethane thinner and a reducer?
"Thinner" is lacquer, "reducer" is a urethane or other non lacquer. You should never use the term "thinner" UNLESS you are refering to LACQUER. If you are talking about "thinning" your urethane use the term "reduce".
Is reducer and thinner the same as lacquer?
NO, they are not the same. "Thinner" is lacquer, "reducer" is a urethane or other non lacquer. You should never use the term "thinner" UNLESS you are refering to LACQUER.
Are all reducer solvents created equal?
All reducers ARE NOT created equal. Automotive refinish primers, basecoats, and clearcoats require “urethane grade” solvents to be used in their reducers. This is due to the unique solubility and evaporation rates provided by “urethane grade” solvents.
How many ways to mix urethane reducer?
You can mix it 1 of 3 ways. 4:1 with activator, 4:1:1 as a regular build primer, 4:1:2 as a sealer. My question is what is the difference in regular reducer and urethane reducer?
Is urethane reducer universal?
UR60 Fast Teperature Urethane Reducer is Universal and may also be used to reduce the viscosity of many other Brands of urethane primers, epoxy primers and urethane clearcoats.
What can I use to reduce urethane paint?
Restoration Shop Medium Urethane Reducer UR70 is a mid temperature, 70 - 85 degrees, paint thinner/reducer. This premium quality reducer is designed to be used with Restoration Shop's Acrylic Enamel, Acrylic Urethane, and Urethane Basecoat Auto Paints.
What kind of reducer should I use?
Slow reducers are good because they allow your paint to flow out. Slow is the best for complete paint jobs. Medium reducers are used in a little colder environment. You can use a medium reducer in maybe 65 to 75-degree environment to set up earlier.
Can you use acetone as a urethane reducer?
4:105:36Acetone or lacquer thinner as a CHEAP urethane reducer vs using ...YouTubeStart of suggested clipEnd of suggested clipNo it is not good paint thinner. It can be a problem for you if you're wanting good results.MoreNo it is not good paint thinner. It can be a problem for you if you're wanting good results.
Is paint thinner the same as reducer?
Solvents, Reducers and Thinners are basically the same type of product. Thinners were originally designed for Lacquers. Reducers were designed for Enamels and Urethanes. Solvents just another description of both of these.
What can I use to thin urethane enamel?
If you want to dilute a gallon of single-stage urethane paint by 5 percent then you'll need to multiply 0.05 by 128. The result is 6.4, so you should measure 6.4 liquid oz. of thinner.
What does urethane reducer do?
A urethane reducer allows you to adjust the consistency of the paint to make it easy to spray on the car surface. The reducer then evaporates, allowing the paint to set and harden.
What does urethane activator do?
Universal Urethane Activator is a high quality catalyst formulated for use in urethane enamels. It provides a high level of gloss, combined with a hard, durable finish.
Do you put activator in base coat?
All you do is add reducer in base coats for the mixing ratio. Because you're not adding any catalyst or hardener or an activator, you don't have to worry about hardening. Base coats are always mixed with reducers, a 50:50 ratio.
Can I use mineral spirits instead of acetone?
Briefly, no. Acetone and mineral spirits are not the same, and should not be treated as if they are. Part of the confusion comes from the fact that both are used as thinners. Painters commonly use mineral spirits, for example, to thin the paint that they put into paint sprayers.
What is paint reducer made of?
Typically, what is referred to as paint thinner is mineral spirits. Mineral spirits are also called white spirits, and are made up of hydrocarbons that are left over from petroleum distillation. Other substances that are used as paint thinners include: Turpentine.
Which is better acetone or paint thinner?
Acetone as Paint Thinner The goal is to banish the paint, not change its character. However, be cautious when using acetone to remove paint from a delicate surface. It has fairly strong stripping capabilities, so it does carry the potential to damage the surface.
What is acrylic urethane reducer?
Formulated as high quality, urethane reducer, to produce a smooth and even flow-out for applications. It can be used in any 2K urethane primer, clear, topcoat and many base-coats that do not require a stabilizer or reactive reducer. Product. Description.
What is urethane thinner?
A urethane reducer is essentially a paint thinner designed specifically to work with the urethane-based paints typically used on automobiles, according to Dennis Parks and David Jacobs, authors of "How to Paint Your Car."
How do you thin Sherwin Williams Emerald urethane?
To spray with a HVLP turbine you can use a 4 or 5 stage Turbine, a 3 stage turbine can work as well but will typically require the paint to be thinned a bit, usually at least 10 percent. For gloss or semi gloss you can use a number 3 tip set which is a 1.3 for satin usually a 4 set (1.8mm tip) is ideal.
Which is better acetone or paint thinner?
Acetone as Paint Thinner The goal is to banish the paint, not change its character. However, be cautious when using acetone to remove paint from a delicate surface. It has fairly strong stripping capabilities, so it does carry the potential to damage the surface.
Can you use AE without a hardener?
AE can be used without hardener and set up on it's own by drying. Urethane is a different product that has to be used with a hardener. (it's called activator) to set up. It's relying on a chemical reaction. to harden the paint and won't cure without the activator.
Can you use urethane reducer on acrylic?
Urethane reducer can be used with acrylic enamel JC without issue... there is acrylic urethanes and poly urethanes, but they all use reducer. Now if you said "Thinner" that is a different product.. kinda like us calling urethane primer .."2K"... there are lots of 2k products, its just the terminology we use for primer..
Urethane Grade Solvents: quality formula is key
All reducers ARE NOT created equal. Automotive refinish primers, basecoats, and clearcoats require “urethane grade” solvents to be used in their reducers. This is due to the unique solubility and evaporation rates provided by “urethane grade” solvents.
Generic Reducers can damage 2K Polyurethane Performance
Many so-called “generic” reducers, which are very inexpensive, utilize cheap solvents, which can contain high levels of water and other impurities.
What is Urethane?
Urethane is a colorless and odorless crystalline compound derived from ethyl ester. It was created in the 1950s–1960s and has a chemical formula of C3H7NO2, which is a combination of both amides and esters and carbonic acid.
What is Polyurethane?
Polyutherane is a polymer (PU) that is made up of organic units of isocyanates and polyols linked via urethane units. As its name suggests, multiple urethane compounds are joined together by a chemical reaction known as polymerization to create a solid substance.
Differences Between Polyurethane and Urethane
What is the difference between urethane and polyurethane? These compounds are so similar that even experts in the manufacturing industry consider them the same thing.
Polyurethane Uses
Polyurethane is an incredibly versatile compound that can be used in countless applications. It’s found in everyday household materials and heavy machinery alike.
Learn More About Using Urethane and Polyurethane in Your Manufacturing
Both urethane and polyurethane can be used to make top-of-the-line industrial and commercial coatings. Looking to add these compounds into your production? Contact us to talk to one of our technical sales representatives about our specialty products and material solutions today.
What is lacquer thinner?
Lacquer thinner is actually a mixture of several related compounds called "aromatic hydrocarbons" I'll save you the chemistry but they are different from oils which are "aliphatic" hydrocarbons, they don't mix with them easily.
What solvents are used to mix finish?
most kinds of finish are mixed up with one of four different classes of solvents: water, alcohol, oil, or -I will get back to this in a minute - lacquer thinner.
Is urethane reducer a king of the castle?
they're all right - urethane reducer is the king of the castle, in terms of quality of flow and even coating - that';s what we reduce OHW with - acetone and lacquer thinner have already been addressed
Does lacquer thinner work?
Not all solvents work for all paints. Then you have evaporation speeds to deal with. Acetone evaporates extremely fast. Lacquer thinner is more of a mix of other solvents (acetone, MEK, etc) designed to specifically thin lacquer paints. But no one really uses lacquer anymore so people mainly use it as a good cleaner.
Can you spray polyurethane?
That being said, We are not spraying polyurethane, but rather a catalyzed (2k) urethane clear coat in our industry. It's much thinner already, and spraying is much more efficient. Wiping the clear would also smear the base paint (and dip), which would defeat the purpose. It is a solvent and (by design) eats into the paint for a chemical bond. Again, different than finishing wood. After all, if wiping automotive finishes were more efficient, wouldn't auto body shops be doing it all the time?
Can you use lacquer thinner with oil paint?
So in order to thin any kind of finish, you need to know what you started with. You can' t thin oil-base paint with water, or lacquer thinner. You can't thin lacquer with oil or water.
