Full Answer
What to look for when choosing a basin tap?
What is the best tap for a countertop basin?
What is a mono basin mixer?
How many holes are needed for a basin mixer?
Why use an infrared basin tap?
Why do hospitals use infrared taps?
What is a new bathroom tap?
See 2 more
Are tap sizes standard?
The standard kitchen sink tap hole size is 35mm in diameter. This is the size that the hole in the sink or cut-out in the worktop will typically be to fit a standard single tap.
Does any tap fit any sink?
Not all taps and countertop basins will be the same size, so you'll want to make sure that there is adequate space from the top of your countertop basin to where the spout exits on the tap.
Are taps a standard width apart?
All contemporarily manufactured traditional bath taps, fillers and bath shower mixers expect 2 tap holes with the distance between the holes centres being 180mm. If the water feeds to the tap will be visible then you will cover these with pipe shrouds which are chrome plated and adjustable in length.
Are all tap holes the same size?
Standard taps and spouts generally require a hole of at least 22mm in diameter. Monobloc mixer taps, taking both a hot and cold supply, mostly require a minimum 32mm diameter hole.
How do I know my tap size?
As a rule of thumb, for Metric threads, the tapping drill can be calculated by subtracting the pitch from the diameter of the thread. eg for an M5x0. 75 thread the tapping drill is 5-0.75mm = 4.25mm. For Imperial (inch) threads the tapping drill size is calculated in the same way, diameter minus pitch.
How do I know which tap to buy?
How To Choose The Perfect Bathroom TapsKNOW YOUR WATER PRESSURE. To get a decent flow of water from your taps it is vital that you choose ones that are appropriate for the water pressure in your home. ... CHECK THE TAP HOLES. ... SELECT THE STYLE. ... WHAT'S IT MADE OF? ... THE PERFECT FINISH.
Do all taps have the same fittings?
No, not all taps will be a suitable fit for all baths. Typically, your bathroom fittings and fixtures will play a part in dictating which taps can accompany them, in addition to your own personal preference.
Are basin taps 1/2 inch?
Basin taps typically use a 1/2-inch pipe to connect the tap to the water supply. Whereas bath taps are capable of using more water, they have a 3/4-inch thread.
Are all UK taps the same size?
Most taps in the UK are said to be a standard size, but it's worth remembering that the size refers to the way in which the tap fits onto the pipes rather than the size of the taps themselves (basin taps being 1/2" and bath taps having 3/4" threads).
How do I know if my faucet hole will fit?
To correctly measure the hole's inside diameter, try using a slide caliper. First, place the slide caliper's inner jaw adjacent to the inside of the faucet hole. Then, slide the scale until it reaches maximum distance. The reading will then appear, indicating the diameter of the faucet's hole size.
Do all taps fit all kitchen sinks?
No they are not all the same width apart. Just measure the distance from the centre of each tap hole and then source a mixer tap that will fit. Although I would say a majority of sinks do have standard distances, but check before buying a tap.
Do all taps have the same fittings?
No, not all taps will be a suitable fit for all baths. Typically, your bathroom fittings and fixtures will play a part in dictating which taps can accompany them, in addition to your own personal preference.
How do I know if a faucet will fit my sink?
If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it's in the way. If the distance is six inches or more you need a “widespread" or “eight inch spread" faucet.
Are taps interchangeable?
While some taps are technically interchangeable, there are several issues with picking from the wrong range. For example, the hole and thread sizes to connect the taps to the water main and the bath or basin itself will be different.
What thread do basin taps have?
Basin taps. Pictured is a basin tap, with a 15mm thread. Bath taps look very similar, except they have a 22mm thread and may be joined together as a mixer. Step 2. How to fasten. Position the tap in place and fit a washer on the underside.
What is the length of a rubber sealant washer?
They are ideal for use behind a pedestal basin or vanity unit. Different lengths are available up to 1.2 metres. They also come in 22m for bath taps.
Can you connect a flexipipe to a tap?
If it is not possible to connect the pipe directly to the tap, you can use a flexipipe with a built in service valve on the end, as pictured. The top end attaches to the tap and the bottom end is a standard 15mm compression valve to attach to the pipe work.
Do taps have a filter?
Most taps will have some kind of diffuser fitted on the end of the tap to act as a filter. When fitting pipes for the first time, take these out as they can collect all the dirt and debris in the system when flushing it out. This will affect the performance of the tap flow. Pop out or unscrew with a screwdriver. The same applies for bath taps too.
Is a basin hole the same as a bath hole?
I compared the basin hole to bath and it is almost identical. My suspicion is its been made overseas and perhaps they use larger holes.
Do basin taps fit into basin holes?
welcome to the world of plumbing jim. It's a curious thing that basin taps do not fit properly into basin holes. At least not without the installer using some ingenuity. I often wonder myself why such a ridiculous situation continues.
What is the diameter of a spray tap?
95 per cent are 35mm, some fancy pull out spray taps can be a larger diameter.
Are hole cutouts for taps in sinks a standard size?
I am looking for a new mixer tap for my stainless steel twin tub kitchen sink. Are the hole cutouts all a standard size?
What to look for when choosing a basin tap?
There are a multitude of things that you need to take into consideration, including: the water pressure you have; what style of tap you want; what finish you want; whereabouts on or around your basin you’re planning on mounting your tap.
What is the best tap for a countertop basin?
Along with tall basin mixers, wall mounted taps are the most modern basin taps, and again, they are ideal to use with a countertop basin. By mounting the taps on the wall, it keeps the entire area around your basin clear and provides a much more minimalist look.
What is a mono basin mixer?
Mono Basin Mixer Taps. Mono basin taps - or monobloc taps - are the most common type of basin tap in modern bathrooms. As the name suggests, they require a single tap hole and have a single spout from where both hot and cold water is dispensed. Most come with just a single lever which control the flow and temperature, however, ...
How many holes are needed for a basin mixer?
3 hole basin taps function much in the same way as mono basin mixers - with both hot and cold water coming out of a single spout - yet, as the name suggests, they require 3 holes . One hole is for the spout, whilst the other two holes are for the hot and cold levers. This gives you excellent control over both water flow and temperature, although it does mean that you might need both hands to adjust the controls to find that perfect temperature. Is the slight nuisance of not always being able to use the tap with one hand worth it for the extra style? Only you can make that decision.
Why use an infrared basin tap?
Infrared basin taps are easier to use than non-concussive taps because you simply wave your hand in front of the tap to activate the water flow. This again makes them ideal for homes with young children that are just learning to be independent but don’t quite have the strength to work a normal basin tap (or the gumption to turn it off properly once they’ve finished using it). Infrared taps are also ideal for use by the elderly and people with disabilities for the same reasons.
Why do hospitals use infrared taps?
Another benefit of infrared taps is that because you don’t actually have to touch the tap they are more hygienic. This is why many hospitals, airports and other places where infections could spread quickly all use them. Like non-concussive basin taps, the choices you have available are limited.
What is a new bathroom tap?
New bathroom basin taps are a great way of enhancing the overall look of your bathroom, en-suite or cloakroom bathroom without the need to spend money on a complete refurbishment. Choosing, however, is not quite as straightforward as it sounds, so we've put together a guide to explain the different types of basin taps and what you should be on the look out for.
