Knowledge Builders

are duraflame logs safe for wood stoves

by Kathryn O'Keefe PhD Published 3 years ago Updated 2 years ago
image

Answer: The main reason a pressed log (Duraflame) is not to be used in a wood stove is it puts out too much concentrated energy (heat) and can damage the stove. Another reason is they produce much more residue (sooty deposits) in the chimney.

Duraflame firelogs (other than stax logs) should not be burned in wood stoves or fireplace inserts that have doors that will affect airflow.

Full Answer

How to combine Duraflame with real logs?

Use Duraflame Firestarters as directed on the package or by following these steps:

  • Place one duraflamelog in your fireplace. ...
  • Place a few small twigs between them, then lay some newspaper over them to hold everything together while burning. ...
  • Light the paper with a match or lighter and stand back. ...
  • It is important that you do not place too many logs on the fire at one time, as this could create dangerous sparks. ...

More items...

Are Duraflame logs safer than wood?

Subsequently, one may also ask, are Duraflame logs safer than wood? The Duraflame site states that, “…they only burn with flames and do not generate adequate coals for cooking.” However, Enviro-Log Firelogs ARE safe to cook over which make these environmentally-friendly firelogs great for camping or other outdoor cooking.

Are Duraflame logs bad for your fireplace?

No, using Duraflame logs to start a fire is not safe and can cause damage to your fireplace. Only use the type of fuel that is recommended for your fireplace. Can I cut Duraflame logs in half? No, it’s best to keep them whole when burning so they do not create excessive sparks or smoke while lit.

How many Duraflame logs to use?

When using Duraflame Logs for cooking, it is recommended that only one or two logs be used per pot of soup. This will help keep heat from escaping up through your chimney instead of warming your living space. If you want to cook more than one pot of soup at a time, then it is recommended that you use more than one or two logs.

image

What should you not burn in a wood burning stove?

What Can I Burn in My Fireplace or Wood Stove?Cardboard in all forms (including pizza, cereal, and shipping boxes) should never be burned in your fireplace. ... Magazines & Wrapping Paper. ... Dryer Lint. ... Fire Accelerant & Lighter Fluid. ... Incorrect Types of Wood.

Can you use firelogs in a wood stove?

No. Our firelog and firestarter products are designed to only be used in traditional wood burning fireplaces and outdoor fire pits. They have not been tested to be used in a wood-burning stove.

Is it better to burn wood or duraflame?

Because they're made from recycled materials, firelogs have been promoted as being more environmentally friendly than regular wood logs, and as producing less emissions, including carbon monoxide.

Do duraflame logs emit carbon monoxide?

Compared to a similar duration wood fire, a duraflame firelog emits: 80% less fine particles. 75% less carbon monoxide. 90% less hazardous air pollutants.

Should you poke a Duraflame log?

Do not poke a burning firelog with fireplace tools unless the fire is almost out. Poking or breaking up a burning firelog in the first 2 hours after lighting can cause the firelog to become extremely flammable and result in sudden flare-up. Flaming particles may stick to tools.

What can you legally burn in a wood burner?

Under the new legislations about the type of fuel you can use in your wood burner, only kiln-dried logs are allowed to be burned due to their low moisture, which means they'll last longer and slower burning wood fuel and a slow-burning fire.

Do Duraflame logs burn clean?

Burns cleaner than wood Duraflame firelogs light faster and burn more completely than firewood, and because far less material is consumed when burning a firelog, significantly fewer pollutants are emitted than a comparable wood fire.

How long does a log last in a wood stove?

Generally, tests show that heat logs will burn for around 2 - 3 hours. Now, that's not a very specific answer to the question 'How long do fire logs last? ' but there are so many factors that will affect burn time, as well as the composition of the log.

What is Duraflame made out of?

Duraflame firelogs are made of a scientific blend of sawdust, wax, and unique fibers. Some interesting materials tested have included recycled fibers such as nut shells, seeds, fruit pits, distillery grains and recycled cardboard. Natural seed is added to some logs to create crackling sounds of a wood fire.

Are Duraflame logs unhealthy?

'Tis the season to be burning synthetic fire logs, but a new study from UNC's Gillings School of Global Public Health reports that using these prepackaged fireplace staples also could increase the chances of developing breast cancer.

Can you get CO poisoning from a wood stove?

Can you get carbon monoxide poisoning from a wood burning stove? The simple answer is yes, you can get carbon monoxide from a wood-burning stove. However, carbon monoxide poisoning is also possible with additional fuels such as gas, oil, solid minerals and biomass. Not just wood-burning and multifuel stoves.

Is Duraflame safer than wood?

This is a myth. Artificial firelogs are not bad for your fireplace; in fact, they're cleaner, safer, easier, and cheaper than regular wood. Artificial firelogs are also known as fake firelogs, wax firelogs, or artificial wax firelogs.

Do Duraflame logs clean chimney?

0:091:38How To Use The Duraflame Flue-Renew Creosote Remover LogsYouTubeStart of suggested clipEnd of suggested clipThat can either fall down and burn up in your fire or it can easily be brushed during normal chimneyMoreThat can either fall down and burn up in your fire or it can easily be brushed during normal chimney cleaning.

Can I mix Duraflame with real wood?

Duraflame firelogs are designed to burn continuously for three to four hours. Combining Duraflame logs with real logs is not recommended because it might exceed the heat rating of your fireplace or create a sudden flare-up as the Duraflame log burns faster than intended because of the added wood.

Are fire starters bad for chimneys?

The accelerants or fire starters can cause flare ups or heat your fire to extremely high temperatures that are unsafe for your fireplace and chimney.

Can you use firestarter in a fireplace?

0:352:13Using Fire Starters To Get Your Wood Stove Fire Going - YouTubeYouTubeStart of suggested clipEnd of suggested clipI love these Rutland fire starters they made by other companies as well. But they're easy to light.MoreI love these Rutland fire starters they made by other companies as well. But they're easy to light. They always light so does the fat wood. They seem to burn a little bit longer than fat wood.

How long can you leave a gas stove on?

With good ventilation, and periodic monitoring, leaving a gas stove on for several hours is not very dangerous. I have safely simmered stocks for 10 hrs+ many times with periodic monitoring every hour or two.

What color should the flame be in a partially blocked air mixture?

Partially blocked air mixture tubes. Your flame should be double blue and the tip of the inner most blue flame is the hottest point.

What is Solo Campfire?

I have the Solo Campfire which is a twig stove designed to use dry twigs and short branch segments to create a clean burning hot fire. It is a gasifier stove that reburns the smoke, so I would not use a Duraflame as the primary fuel.

Is it dangerous to use a carbon monoxide stove?

Definitely dangerous. Don't to it ever. Even in a perfectly adjusted stove which releases only carbon dioxide. This can make you drowsey or even asphyxiate you. In a poorly adjusted stove, carbon monoxide will be a product of incomplete combustion which can quickly kill you.

Is it safe to leave a fire out while asleep?

But as others have mentioned, leaving one completely unattended for many hours or overnight while you are asleep may not be very safe. I have come back after an hour to find that the flame has gone out if I try to set it too low, so overnight that could mean a ruined batch of food, a dangerous build up of gas and a being awoken by your house exploding into a big ball of fire, or never waking up at all.

Can you use Duraflame logs in a stove?

The Duraflame site states that, “…they only burn with flames and do not generate adequate coals for cooking. I would not use a Duraflame-type log in a Solo stove.

When should a damper be left open?

The damper needs to be in a fully open position while using these fire logs. Even after the fire logs have gone through the time allotted on the package , the damper should still be left open until the next morning to make sure that the ashes are completely extinguished.

Do you have to close the glass doors on a fireplace?

If you have glass doors on the front of the fireplace, the glass doors must be in a fully open position . Fire needs oxygen and it pulls the oxygen from the room. Cutting off the oxygen source will create a vacuum inside the firebox and we’ve seen more than a few instances of the glass imploding or exploding. Once the fire is out, close the glass doors before going to bed for safety reasons and to prevent downdrafts in the middle of the night.

Can you poke a fire log?

Never poke the fire log once it has started burning. Breaking open the log prematurely releases all the fuel at once and you may experience a major smoking problem. These logs are designed to release the fuel slowly, in a controlled way.

Do fire logs build up creosote?

And finally, manufacturers of prefabricated fire logs state that these products are clean burning but that doesn’t mean that these logs won’t create creosote buildup in the flue. In fact, in our experience, many times the creosote from fire logs has more of a buildup than with wood. Whether burning fire logs, wood, or other materials, make sure to have your chimney inspected by a CSIA Certified Chimney Sweep on an annual basis and sweep if needed.

How much wood is used in a fire log?

Part of the difference is also due to the amount of material used. In a typical evening’s fire, 20-25 pounds of wood are used. Firelogs are designed for single use, and weigh up to six pounds. Less material burned equates to less emissions. It also means less creosote buildup over the course of a burning season.

What are fire logs made of?

The most common fire logs are made from two components: paraffin wax (a petroleum byproduct) and sawdust. Both are manufacturing waste products that are now combined, packaged and resold by some companies as firelogs.

Why is burning wood bad for you?

The biggest complaint against burning firewood is the amount of greenhouse gases created by a typical fire. Carbon monoxide is a byproduct of burning wood, and although the levels are not high enough for concern to the homeowner, the gases that come out of the chimney are considered significant enough by some locales that limits have been placed on wood burning, such as “no burn” days.

What is a wood fire made of?

As mentioned previously, a wood fire is often made up of many logs, not just one, and the volume of fuel helps to create a warmth that is a signature of wood fires. As firelogs are designed to only be burned one at a time, the single log certainly does not generate enough warmth to attract anyone to want to sit closer.

What is the appeal of a fire in a fireplace?

Part of the appeal of a fire in the fireplace are the nostalgic tingling of many senses: the smell of a fire, the crackles and pops, the dancing flames.

Is there a smell of wood fire?

The smell is certainly different, the flames are there but aren’t necessarily as random as a wood fire, and all that can be heard is the faint hiss of the escaping gases. Some manufacturers have introduced firelogs that imitate the sounds of a wood fire, and even some with different colored flames. But quite honestly, there’s nothing ...

Do supermarkets have firewood?

There are very few supermarkets these days that do not have firewood stacked up outside: small batches of logs wrapped in cellophane with a handle attached that seems to be more useful for punishing hands than serving as an effective method of carrying 20 pounds of wood.

image

1.Duraflame | Frequently Asked Questions - Duraflame

Url:https://www.duraflame.com/safety-tips/fire-logs-and-fireplaces

22 hours ago Web · Duraflame logs are safe to start your fires as they were designed to burn within multiple types of fireplaces. Wood burning stoves are included in the list of fireplaces that have been tested with a Duraflame log. There are considerations that can make burning a Duraflame log unsafe to start a fire in your fireplace.

2.Can you use Duraflame logs in a solo stove? - Quora

Url:https://www.quora.com/Can-you-use-Duraflame-logs-in-a-solo-stove

13 hours ago WebDuraflame firelogs are Underwriter Laboratories (UL) Classified for use in zero-clearance manufactured metal fireplaces and are suitable for use in all types of traditional open-hearth wood-burning fireplaces. Duraflame firelogs (other than stax logs) should not be burned in wood stoves or fireplace inserts that have doors that will affect airflow.

3.Are Fire Logs Safe to Use? - Swede Chimney Sweep

Url:https://swedesweep.com/fireplace/fire-logs-safe-use/

34 hours ago WebDuraflame firelogs (other than stax logs) shouldn't be burned in wood stoves or wood stove fireplace inserts. Glass doors can be closed after the firelog is no longer burning to keep warm air in the house.

4.The Pros and Cons of Using Manufactured Fire Logs

Url:https://askthechimneysweep.com/2014/02/the-pros-and-cons-of-using-manufactured-fire-logs/

17 hours ago WebNevertheless, according to the Duraflame website, they have also recommended not to use logs in solo stove, instead they have advice the use of their OUTDOOR firelogs or Campfire Roasting Logs, and the is due to the fact that duraflame logs can only burn with flames and do not generate sufficient coals for cooking. In a Solo stove, I would not use a Duraflame …

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9