What is the standard height of a fireplace opening?
A fireplace’s height opening is the measure of the hearth from the top of the opening, while the measure of the opening’s width is the measure of one side of the opening to the other. The standard height of a fireplace’s opening is between 24 to 29 inches and 24 to 36 inches wide.
What is the standard size of a fireplace hearth?
An opening that’s between 24-36 inches wide, 24-29 inches high, and 16 inches deep. On average, the distance between the hearth and the damper is about 37 inches. The fireplace’s rear firebox is generally between 11-19 inches wide, with a height of 14 inches.
What is the standard size of a surround around a fireplace?
The standard height of a fireplace’s opening is between 24 to 29 inches and 24 to 36 inches wide. Surround is an unofficial name given to the collective parts of the mantle, the legs, and sometimes the hearth. The fireplace’s surround is the face surrounding the firebox of your fireplace.
What is the standard size of a fireplace mantle?
Most fireplaces are 42 inches wide, while some smaller fireplaces can have as little as a width of 36 inches. Some somewhat bigger fireplaces can even be 48 inches wide. With the height, generally, a mantle should at least be 12 inches above the opening.
Are fireplace openings standard size?
Standard Fireplace Opening Dimensions The standard height of a fireplace's opening is between 24 to 29 inches and 24 to 36 inches wide.
What is a normal fireplace opening?
The Average Dimensions for Each Part of a Fireplace The average fireplace has the following dimensions: What is this? An opening that's between 24-36 inches wide, 24-29 inches high, and 16 inches deep. On average, the distance between the hearth and the damper is about 37 inches.
Are all fireplaces the same size?
Fireplace inserts are not one-size-fits-all. They must be the right dimensions for your particular space, so measure the height, width and depth of your fireplace from the back wall to the front opening. Use those specs to ensure a proper fit.
Whats a standard size fireplace?
about 36”x30”An average fireplace is about 36”x30”. When it comes to the actual dimensions of a fireplace, these can be found in just about any size larger than 24”x24”, all the way up to 48”x32” and higher. The physical size of a fireplace insert is often listed by the width in inches, and they tend to range from about 20” to 60”.
How do you calculate the opening of a fireplace?
Step 1: Find the cross-sectional area of the fireplace opening. Multiply the W=36" X H=30" and that equals 1080 square inches of fireplace opening. Step 2: If you are using a round liner and the chimney height is more than 8' above the fireplace opening you can divide the 1080 by 12. This amount equals 90".
How do you measure a fireplace opening door?
1:326:27How To Measure A Prefab Fireplace For Doors - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemember we're gonna measure from metal to metal we're not going to measure from tile to tile. It'sMoreRemember we're gonna measure from metal to metal we're not going to measure from tile to tile. It's very important your firebox or your new doors need to fit inside the metal opening.
How do I identify my fireplace insert?
To know for sure, you will have to look for the nameplate that lists the manufacturer, model, and serial number. This nameplate is usually located on the right hand facing of the fireplace just behind the screen. It could also be underneath the firebox if there is a grill at the bottom that flips down.
How wide should a fireplace insert be?
So, how wide should a fireplace be? A fireplace should be 24 – 72 inches (2 – 6 feet) wide. Generally, smaller rooms require smaller fireplaces, while bigger rooms benefit more from larger ones. Getting the dimensions wrong poses the risks of a fireplace that overpowers or does not meet a room's heating demands.
Can a fireplace be too big for a room?
Regardless of heat output or TV size, the size of the fireplace should suit the size of the room. A small fireplace will be lost in a large space. Likewise, a large fireplace could overpower a tiny room. However, we see clients going too small far more often than going too big.
How wide should a fireplace wall be?
A 36" or 42" fireplace opening width is more common, but you need to assume about 18" on each side for a typical non-combustible surround and wood mantel, 24" on each side for something more grand. The same thing goes for stone on each side. You need enough room to make it look like an actual masonry fireplace.
Is my fireplace opening too big?
An ideal fireplace opening would be no more than ten times the cross sectional area of the chimney flue. For example if the inside dimensions of the flue are 10 x 10 equalling 100 square inches, then the fireplace opening should not exceed 10 times this or 1000 square inches.
What is the normal depth of a fireplace?
A wood-burning fireplace should be at least 16 inches (40.64 cm) deep, as standard, unless the opening is over 48 inches (121.92 cm) wide, according to the Brick Industry Association. At most, the depth of a wood-burning fireplace should be 20 inches (50.9 cm) to allow for ample heat distribution.
What is the normal width of a fireplace mantel?
The majority of mantels we sell are from 66”-78”, but we make every mantel custom to your unique space. Mantel Face Height: Is your fireplace in a large or small room? A mantel with a 6” Face Height can stand its ground in a large home, however, it can overpower a smaller space.
How wide should a fireplace damper open?
It's important to ensure that your damper isn't too small, too low or too far back. It should be the full width of the firebox and at least 6 inches above the top of the opening. The damper is usually closer to the front of the fireplace than the back.
How big is an electric fireplace?
There are electric fireplaces perfect to be situated in right smack in the middle of a living room and usually have a dimension of 31 inches in height, a width of 44 inches, and a depth of 13 inches.
How deep is a fireplace?
A fireplace’s depth is measured from the back of the firebox to the opening—the average depth of a fireplace is about 16 inches deep.
How tall should a fireplace mantle be?
With the height, generally, a mantle should at least be 12 inches above the opening. For a standard fireplace with a 36 inches width, it should be 29 inches tall.
What is a fireplace insert?
A fireplace insert is usually a sealed box taking the place of an old masonry fireplace. A fireplace insert can be powered by wood, gas, or propane, and they produce more heat and consume less fuel than a traditional fireplace. There are two types of fireplace inserts, and they could either be powered by gas or wood.
How tall is a masonry fireplace?
The height of a masonry fireplace will depend solely on the size of the room where the fireplace will be located.
How big is a gas fireplace insert?
Small gas-powered fireplace inserts have a width, height, and depth of 26, 17, and 14 inches.
Why do outdoor fireplaces come in bigger sizes?
This type of fireplace usually comes in bigger sizes because they are out in the open and are more vulnerable to air and weather.
How To Properly Measure a Fireplace Opening
Fireplace openings or a fireplace insert are also referred to as a firebox or cavity. Unfortunately, this variance in the terms we use is one of the most common reasons people mismeasure a fireplace opening, as people confuse the terms to mean something else.
What Is the Standard Size of a Fireplace Opening?
The size of a firebox or fireplace insert will depend on the space that you allot for them. Obviously, you can’t have a large fireplace in a small to medium-sized room. So to help you get an idea of how big — or small — a fireplace opening should be, here are the standard sizes that you’ll find:
How To Make a Fireplace Opening Bigger
It’s easy to make a fireplace opening bigger, but if you want to move the lintel, you may have to contact a professional to do it for you. You also need to ensure that the renovation you’re going to do with your fireplace opening complies with any regulations mandated by your city.
Conclusion
Measuring a firebox is easy because you only have to measure the height and width. The depth remains the same, regardless of the size of your fireplace. However, if you want to be sure that you’re getting the right measurement for your fireplace, it would be best to measure it from different sections. Especially if you want the proper
What is the depth of a fireplace?
The depth is the distance from the face of your firebox to the back wall. Record the dimensions of your fireplace depth from the center of your firebox.
How to measure fireplace dimensions?
The Proper Way to Measure Dimensions of a Fireplace. In order to measure your fireplace, you will need to record the height, width, and depth. Failing to record the proper dimensions can lead you to purchase an insert that will not fit correctly. To do this, you will need to record each dimension at different points to get an accurate reading.
What is a brick fireplace called?
Generally speaking, you want to use the smallest of these measurements for your final report. Some brick fireplaces have what’s called a lintel. A lintel is an iron rod that runs from the front to back down the ceiling ...
What is the purpose of a fireplace lintel?
The purpose of the lintel is to provide structural support for your fireplace and is usually embedded in the brick but can sometimes be visible. If you’re opening has a lintel that is protruding slightly, make adjustments for the lintel and add 1/8” space to create sufficient room for clearance.
How tall is a firebox?
Figure 1.1: The opening width of this firebox is 42 3/4″ at the face of the unit and the height is 35 1/4″. These are exterior measurements; interior measurements also need to be taken. Directions on recording interior dimensions are round below.
How to measure firebox width?
In a similar fashion, you will need to measure the width of your firebox from the opening (aka the face or exterior measurement) and rear (interior). Cross-check the width at different heights to make sure your firebox is symmetrical.
What are the Best Fireplace Design Dimensions?
The best fireplace design dimensions are the ones that ensure your fireplace will not smoke. The Brick Industry Association is perhaps the most respected source of fireplace design criteria in the world.
What is the second consideration for a fireplace?
The second design consideration is what the fireplace looks like to those who look at it while in the room. If you need inspiration and want to see stunning photos of some fantastic fireplaces, then order Fire Places: A Practical Design Guide for Fireplaces and Stoves
Why Does a Fireplace Smoke?
A fireplace will puff smoke into a room if its design is flawed. The physics of smoke rising into a chimney is complex and several things must be done right so all the smoke from the fire exits your home.
Where is Free Fireplace Design Literature?
The Brick Industry Association has three excellent pamphlets about fireplace and chimney design and construction. I recommend you read these three things:
How High Up Should the Damper Be Above the Fireplace Opening?
The bottom of the damper should be a minimum of 8 inches above the top of the fireplace opening. This part of the fireplace is called the throat. If your damper is not at least 8 inches above this spot, you will have smoking problems for sure!
What is the Best Flue Size?
It's always better to use the smaller flue size when you have two choices. When using the smaller flue size, you will be required to raise the height of the chimney.
What is the Best Mortar for the Beige Fire Brick?
The best mortar for firebrick is fire clay. It's often called refractory cement and it rated for temperatures above 2,000 degrees F.
