A door hinge has a standard size of 3.5″ in width, 3.5″ in length with a door thickness of 1 ⅜ inch. You can also find many other sizes on the market, including a 3.5-inch hinge, 4-inch hinge, 5-inch hinge, 6-inch hinge, 5-inch commercial hinge, and 6-inch commercial hinge. Read further to understand the detailed size guide. Door Hinge Sizes
Full Answer
What are the main types of door hinge?
Exterior Door Hinges
- Butt Hinge. One of the most common door hinges is the butt hinge. ...
- Flush Hinge. Another common hinge style is the flush hinge. ...
- Ball Bearing Hinge. While door hinges do wear down over time, some naturally last longer than others. ...
- Case Hinge. ...
- Hospital Hinge. ...
- Strap Hinge. ...
- Olive Knuckle Hinge. ...
- Pivot Hinge. ...
- Heavy Duty Hinge. ...
How many hinges are needed on a door?
Usually at least 3 hinges need to be fitted on a door. Light weight internal domestic doors may be fitted with only 2 hinges. Doors with a security function need to have at least 3 hinges, as this makes them more difficult to force. For doors over 2200mm tall, then four hinges can be used to prevent warping.
How to install or replace door hinges?
- Drill pilot holes where you marked the screw location on the doors. Go slowly so you don’t drill all the way through the door.
- Attach the new hinges with screws .
- Install new knobs and catches or reattach the old ones.
How to mortise hinges on a standard interior door?
Part 1 Part 1 of 3: Marking the Hinge Spot Download Article
- Place your hinge flush against the door. Position your door so you can clearly see the back edge. ...
- Draw an outline around the hinge using a pencil. Hold your hinge down to keep it steady. ...
- Score the outline with a utility knife. Once you’re happy with the outline, remove your hinge from the door.
- Mark the depth of the mortise with your utility knife. ...
What are cabinet hinges?
Where are cabinet hinges placed?
How to keep cabinet hinges straight?
How far should cabinet hinges be from the edge of cabinet?
Can you open a double cabinet door in a swinging motion?
See 2 more
About this website
Are kitchen door hinge holes standard?
The hinge holes are drilled as a standard 35mm diameter hole. You don't need to worry about the measurements in from the side edge of the doors as this measurement is always standard at 22.5mm to centre of hole.
Are kitchen cabinet hinges standard size?
Concealed hinges come in many versions but only two sizes, these are 26mm and 35mm. Concealed hinges are the hinges most commonly used on kitchen cabinet doors. 26mm concealed hinges are used in light units like bathroom cabinets and were oten used on budget kitchen cabinets to keep the price down.
Are all kitchen cabinet hinges the same?
It may surprise you that there are different types. The construction of your cabinet – most notably, the overlay of the face frame and the cabinet door – determines which cabinet hinge you need. Similarly, where your drawer slides need to be mounted dictates what type of drawer slide you need.
What size are standard kitchen hinges?
This is a typical concealed hinge used on Kitchen, Bedroom Bathroom and built in cupboards. They come in two sizes 35mm dia and 26mm dia hole size. Most hinges used are the 35mm dia. 26mm dia hinges are sometimes used in small bathroom cabinets or budget carcasses.
Can you replace kitchen cabinet hinges?
Replacing cabinet hinges doesn't have to be intimidating or difficult. With careful preparation and a few tools you probably already own, you can install brand new hinges rather than trying to paint the old ones.
How do I know what size hinge I need?
In general, you'll want to use one hinge for every 30 inches of door height....For example:Use two hinges for doors up to 60 inches tall.Use three hinges if the door is between 60 and 90 inches tall.For doors between 90 inches and 120 inches, use four hinges.
How do I know what hinges to buy?
Hinge Size Doors up to 60 inches need two hinges. Doors over 60 inches, but not over 90 inches, need three hinges. Doors over 90 inches, but not over 120 inches, need four hinges.
How do I find matching cabinet hinges?
Compare the offset on existing hinges to new ones to make sure they match....Tips on Buying Replacement Cabinet HingesThe screw pattern on the new hinges matches the old ones.The offset on the new hinges is the same as the existing ones.The footprint of the new hinges matches the old ones.
How do you replace old cabinet hinges?
0:091:31How to Replace Cabinet Hinges | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipNeed first remove the door by unscrewing the old hinges from the cabinet frame. Then unscrew the oldMoreNeed first remove the door by unscrewing the old hinges from the cabinet frame. Then unscrew the old hinges from the cabinet. Door. To position the new hinges.
How do you measure a kitchen door hinge?
If the middle hinge is exactly half way up the door, just specify the position as 'centre'. If the door has four hinge holes, measure the two top hinges from the top edge of the door to the centre of each hinge. Then measure the two bottom hinges from the bottom edge of the door to the centre of each hinge.
Which hinges are best for kitchen cabinets?
BEST OVERALL: Furniware 10 Pieces Soft Closing Cabinet Hinges.BEST BANG FOR THE BUCK: KONIGEEHRE 20 Pack Soft Close Cabinet Door Hinges.BEST UPGRADE: Blum CLIP top BLUMOTION Soft Close Hinges.FACE FRAME CABINET PICK: Probrico Soft Close Kitchen Cabinet Door Hinges.More items...•
Can you replace old cabinet hinges with soft close?
It is possible to convert a cabinet with a soft close to stop the loud noises associated with opening and shutting your cabinets. You can often purchase a small adapter and install it within minutes to fix the problem, but you must know which model to purchase and how to install it.
How do you measure for replacement hinges?
Replacing Door Hinges Measure your door hinges from side to side & top to bottom with the leaves open. Most door hinges are the same measurement in height as they are from side to side when open.
How are old cabinet hinges measured?
2:345:13How To Measure and Pick Replacement Cabinet HingesYouTubeStart of suggested clipEnd of suggested clipThe inside edge that we're looking at the outside edge to get that overlay how much distance is beMoreThe inside edge that we're looking at the outside edge to get that overlay how much distance is be in between these two you just take another piece of tape.
What size is a standard door hinge?
3.5" x 3.5"What size of door hinge do I need? Most homes have a standard sized hinge of 3.5" x 3.5" This measurement is from the bottom edge of the hinge to the top end of the hinge, and then from the outside edge to edge when the hinge is open. Exterior doors usually have a 4" hinge on them, but not always.
Do door hinges come in different widths?
Residential Door Hinges They are generally only available in 3 sizes (3″ x 3″, 3-1/2″ x 3-1/2″, and 4″ x 4″). They are best used on lightweight doors.
Rule of thumb on hinge placement - FineWoodworking
I'm in the UK where it is usual to place consealed hinges 100mm from the edge of the carcase, a little less on the door as they are normally 3-5mm smaller each way than the carcase to allow for clearance with the worktop and adjacent doors.
Hinge Placement Rules and Traditions - WOODWEB
From contributor D: The rules are there to be broken. I have no problem with the Stanley standards, or anyone else's hinge placement. Mostly it is what we are used to seeing, even if subliminally.
Cabinet hinge placement - by RonPage @ LumberJocks.com ~ woodworking ...
Here’s a question for the experts from a weekend warrior: When I place the hinges on a cabinet door, I put them where they look good to me. As an example, on a 31” tall door by 20 1/2” wide, the top hinge ended up 4 1/4” from the top of the door to the center of the hinge.
3.5-inch hinge (Standard Size)
This is the standard size of door hinge for internal doors on residential homes, and it is the most common size of hinge. It measures 3.5 inches wide and 3.5 inches long. This hinge is compatible with doors that are equal to or less than 32 inches wide and which also have a door thickness of 1 ⅜ inch.
4-inch hinge
This hinge is slightly bigger than the standard size hinge, by a half-inch in each direction, giving it a total measurement of 4 inches wide by 4 inches long. It is suitable for doors that are one ⅜ inch thick and which have a width measurement of between 32 and 36 inches.
4.5-inch hinge
The 4.5-inch hinge measures 4.5 inches wide and 4.5 inches long. It can be used on slightly thicker than average doors, with a door thickness of 1 ¾ inch. The width of the door can measure anything up to 36 inches to be compatible with this hinge.
5-inch hinge
This is a larger hinge which is suitable for doors that are both thicker and wider than standard. The hinge will measure 5 inches wide and 5 inches long. It can be used on doors that have a thickness of 1 ¾ inch and which are between 36 and 48 inches wide.
6-inch hinge
This is the largest size of hinge you can expect to find when installing doors or replacing hinges. It is designed to be able to handle the additional weight of a door that is very wide.
5-inch commercial hinge
This is a commercial hinge that is designed specifically for use in commercial applications where doors tend to be thicker and heavier, and therefore the hinge needs to be more heavy-duty to deal with the extra weight.
6-inch commercial hinge
This is another type of commercial hinge which is extra-large to make it better suited for coping with the additional weight of an extra wide and extra thick door. The hinge measures 6 inches wide and 6 inches long and will be thicker than standard hinges. It is compatible with doors that have a thickness of 2 inches, 2 ¼ inches, or 2 ½ inches.
How big is a 1/2 hinge?
A hinge with a 1/2″ overlay will be 1/2″ larger than the cabinet opening on all sides, or 1″ wider and 1″ taller. Your overlay cannot be larger than your face frame width.
What is concealed hinge?
Concealed Hinges. Concealed hinges are mounted inside the cabinet, with the cabinet closed you will not see the hinge. Most modern kitchen use concealed hinges. There are features you can find in a concealed hinge like soft close and greater than 90 degree opening capability.
What Type of Cabinet Do You Have?
There are two main types of cabinets: face frame cabinets and frameless (or Euro-style cabinets).
How to measure for overlay doors?
To measure for overlay cabinet doors on face frame cabinets, you first need to take a measurement of the opening of the cabinet. Then you will add the overlay amount defined by your hinges on the sides.
What are the challenges of frameless cabinets?
One of the challenges with frameless cabinets is keeping the cabinet box perfectly square. If it is not square, you can struggle with hanging doors to have an even reveal (the space between the cabinet frame and the cabinet door).
What is frameless cabinet?
A frameless cabinet is a cabinet that is only made from plywood. The plywood edges are covered in edge banding to finish them. They are sometimes called European style cabinets and were made very popular by Ikea. It is a very simple, modern design for cabinets.
How to measure for inset cabinet doors?
To measure for inset cabinet doors, you first need to take a measurement of the opening of the cabinet. Then you will subtract the reveal on all four sides. Cabinet Opening Height – (Reveal x 2) = Cabinet Door Height. Cabinet Opening Width – (Reveal x 2) = Cabinet Door Width.
How many hinges are needed for a kitchen cabinet?
Our standard-sized kitchen units are 720mm high by 600mm wide, requiring 715mm by 596mm doors with two hinges each. However, you should always measure the existing doors before selecting replacements to ensure you get the exact same size to fit the unit, especially if your cabinets were made to measure.
How deep should a door hinge be?
Standard hinge holes for these hinges tend to be 35mm in diameter and around 10-12.5mm deep. They should be drilled or bored around 100mm from the top or bottom of the door and 22-22.5mm from the side edge of the door to the centre of the hole.
What is a hinge cup fix?
HINGE CUP FIXINGS – Screws are driven through these holes to secure the hinge cup to the back of the kitchen door.
How many pilot holes are there in a cabinet door?
4) Repeat this process (steps 2 & 3) at the other end of the cabinet door, so that there are 3 pilot holes at each end where the hinges will be positioned.
What is the pivoting section of a door?
HINGE – The pivoting section that allows the door to open and close, which connects the hinge cup to the mounting plate.
Can you drill holes in kitchen doors?
Though there is measuring, marking, and drilling involved, you don’t have to be a professional to successfully drill hinge holes in kitchen doors.
Where do you put rubber buffers on door hinges?
Once the hinges are on, you can wipe off any dust and stick the rubber buffers on the door interior, on the opposite corners to the hinges.
How to measure the middle hinge of a door?
If the door has four hinge holes, measure the two top hinges from the top edge of the door to the centre of each hinge. Then measure the two bottom hinges from the bottom edge of the door to the centre of each hinge.
How to measure for hinges?
How To Measure Doors For Hinges. You will need to do this if you want us to drill your new doors for hinge holes. To measure for hinge holes you will need to do the following: Measure from the top edge of the door to the centre of the top hinge hole for the top hinge position. Then measure from the bottom edge of the door to the centre ...
How to measure a door with 3 hinge holes?
If the door has three hinge holes, measure from the top edge of the door to the centre of the hinge in the middle. If the middle hinge is exactly half way up the door, just specify the position as ‘centre’.
How far down do you drill a door?
Note: If you are using our standard measurements or buying units from us, the doors will need to be drilled 100mm from the top and 100mm from the bottom. Our standard drilling position for doors with four hinge holes (over 1700mm high usually) are 100mm and 750mm from the top and 100mm and 750mm from the bottom.
What are cabinet hinges?
Cabinet door hinges come in a wide variety of different shapes, sizes, and types. Some cabinet door hinges are spring loaded, while others are inset into the door. They can be plastic, wood, metal, and even ceramic. No matter what type you have, you will have to find out where to actually attach them on your cabinet door.
Where are cabinet hinges placed?
Cabinet door hinges are placed on the top and bottom of the side of the door. Continue reading below Our Video of the Day. 2. Opposite Cabinet Door Pull.
How to keep cabinet hinges straight?
The easiest way to place hinges in a consistent manner, and keep your cabinet doors straight, is to use a straight edge. Line the straight edge 1/4 inch from the edge of the cabinet door opening and mark the placement for the hinges two inches from the top and bottom.
How far should cabinet hinges be from the edge of cabinet?
The cabinet door hinges should be placed at least 1 1/2 inches to two inches from the top of the edge of the cabinet. Alignment with the edge of the cabinet will greatly depend on the type of hinge. They could be set flush with the edge of the cabinet face or in 1/4 inch from the edge. 4. Inlay Cabinet Door Hinges.
Can you open a double cabinet door in a swinging motion?
Because of this you can easily open the door in a swinging motion without putting too much in the exertion. In double cabinet doors, placing the cabinet door hinges on the opposite side of the doors - even when there is a middle frame - will allow the doors to open wide without interfering with the other. 3.
Introduction to kitchen cabinet door hinges
Before we get into it, we need to make sure you understand all the parts involved so you know exactly what we’re referring to in the instructions. We’ll be talking about the most commonly used type of hinges, European-style hinges, also known as concealed hinges or cup hinges.
How to drill holes for kitchen door hinges
When you order kitchen cabinets from Kitchen Warehouse, they usually arrive pre-drilled for easy assembly, unless the doors are directional and can only be installed one way up. You then have the freedom to decide whether these will be right-hung or left-hung doors and drill the hinge holes yourself accordingly.
Mounting new kitchen cupboard doors
To start with, you should have unscrewed and removed the old kitchen doors and any hinge backplates from the cabinets. If your new doors have the same measurements and hinge positionings, you should be able to use the existing holes to install the new doors.
Looking for replacement kitchen doors for a kitchen makeover?
There are many benefits of replacement kitchen doors, but don’t just take our word for it. Browse our website for yourself to discover a stunning range of replacement kitchen door styles, from signature Shaker doors to contemporary handleless kitchen doors, with a variety of finishes including gloss, matt, textures, and paint.
What are cabinet hinges?
Cabinet door hinges come in a wide variety of different shapes, sizes, and types. Some cabinet door hinges are spring loaded, while others are inset into the door. They can be plastic, wood, metal, and even ceramic. No matter what type you have, you will have to find out where to actually attach them on your cabinet door.
Where are cabinet hinges placed?
Cabinet door hinges are placed on the top and bottom of the side of the door. Continue reading below Our Video of the Day. 2. Opposite Cabinet Door Pull.
How to keep cabinet hinges straight?
The easiest way to place hinges in a consistent manner, and keep your cabinet doors straight, is to use a straight edge. Line the straight edge 1/4 inch from the edge of the cabinet door opening and mark the placement for the hinges two inches from the top and bottom.
How far should cabinet hinges be from the edge of cabinet?
The cabinet door hinges should be placed at least 1 1/2 inches to two inches from the top of the edge of the cabinet. Alignment with the edge of the cabinet will greatly depend on the type of hinge. They could be set flush with the edge of the cabinet face or in 1/4 inch from the edge. 4. Inlay Cabinet Door Hinges.
Can you open a double cabinet door in a swinging motion?
Because of this you can easily open the door in a swinging motion without putting too much in the exertion. In double cabinet doors, placing the cabinet door hinges on the opposite side of the doors - even when there is a middle frame - will allow the doors to open wide without interfering with the other. 3.
