What is a reverse threaded nut on a lawn mower?
The reverse thread helps to secure the blade on the drive shaft such that the rotation of the blade does not loosen the nut. It is important to note that not all lawnmowers use a reverse threaded nut. There are still a lot of details to pay attention to in order to carry out the procedure easily and correctly.
Are lawn mower blades threaded?
The lawnmower blades itself is not threaded, but most nuts that held the blade in place are reverse threaded. The reverse thread helps to secure the blade on the drive shaft such that the rotation of the blade does not loosen the nut.
Are Craftsman lawn mower blades reverse threaded?
Yes. The bolts that hold the mower blades on a Craftsman mower in place are reverse threaded. That means that to tighten the bolt you must turn it to the left (counterclockwise), and to loosen it you must turn it to the right (clockwise).
What are the blade nuts on a lawn mower for?
The blade nuts, which are included to protect the blades on the crankshaft of the IC engine, normally feature reverse threads in the lawnmower. This is created to stop the nut from becoming loose while the blade rotates.
Why are mower blade nuts reverse threaded?
Why do lawn mowers use reverse threaded nut?
How to keep a mower blade from turning?
Which way do you turn the blades on a walk behind mower?
How to loosen a bolt on a lawn mower?
Why do you need gloves on a lawn mower?
What is a lawn mower?
See more
Which way does the nut turn on a lawn mower blade?
2:319:26How to Remove & Replace a Lawnmower Blade - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd chop things up right so it's a sharp edge that you're looking for and if that's the direction ofMoreAnd chop things up right so it's a sharp edge that you're looking for and if that's the direction of the blade is going to spin.
How do you loosen a lawn mower blade nut?
0:004:42How to remove a lawn mower bolt stuck (DIY Guide) - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy you just use an old shirt cover the wall more blade itself that way you don't cut. It. Find aMoreBy you just use an old shirt cover the wall more blade itself that way you don't cut. It. Find a bowl metric 16 and remember that it's gonna unscrew counterclockwise.
Are Toro mower blade bolts reverse thread?
Are Toro Mower Blades Reverse Thread? No. The bolt holding the Toro mower blade in place loosens in the traditional manner, i.e. to the left, while it tightens to the right. Some Toro owners complain that this bolt is extremely difficult to loosen.
How do you get a stripped bolt out of a lawn mower blade?
2:056:19How To Remove A Rounded Off Bolt (Without Cutting) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i've just got it on there i'm just going to tap it. On. And i'm going to go get a wrench. There.MoreAnd i've just got it on there i'm just going to tap it. On. And i'm going to go get a wrench. There. And we'll try it i've never done this before if that gets that off there i'll be uh mega impressed.
How do you get lawn mower blades off?
0:101:33How to Remove and Replace Lawn Mower Blades - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe blade with the universal blade removal tool or a block of wood. Loosen the blade retaining boltMoreThe blade with the universal blade removal tool or a block of wood. Loosen the blade retaining bolt and remove the blade.
How do I remove a blade adapter?
1:342:57How To Remove A Lawnmower Blade Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure you have a loose bolt in there that's a bit longer above. The adapter. And then CenterMoreMake sure you have a loose bolt in there that's a bit longer above. The adapter. And then Center everything together like that and I'll tighten the center bolt. And make sure to hold the jaws as well.
What size is the nut on a lawn mower blade?
5/8"What size are the tractor cutting blade retainer nuts and what direction should they be turned? The retainer nut on most of our riding mower blades are a 5/8" thread diameter. This sized thread diameter nut normally requires a 15/16" wrench or socket tool in order to remove/install.
How do you remove the blade from a Briggs and Stratton lawn mower?
3:123:55How to Remove Lawn Mower Blades - YouTubeYouTubeStart of suggested clipEnd of suggested clipPretty close to parallel with the blade. And then you can just simply squeeze it like that and they'MorePretty close to parallel with the blade. And then you can just simply squeeze it like that and they're going to be on there tight. So you want to just be careful.
How Do You Know If Your Lawn Mower Blade Is Reverse Thread
You can check the direction of your lawnmower blade nut threading by looking at it. By glancing down the driveshaft, you can see the nut will either be held in place by turning it in the opposite direction from the way the blades spin.
Lawn Mower Blade Bolt Direction
There are many confusing and contradictory ‘facts’ on the internet about the reverse threads on mower blades.
Helpful Tips To Know If Lawn Mower Blades Are Reverse Thread
Looking at the bolt will tell you which direction the threads spin. If the threads angle up and to the right, it is a standard bolt, and the nut that fits on it will also be normal. These angles can be subtle, but they are always present.
Final Thoughts
Despite the pervasive rumor that lawn mower blades are attached with a reverse threaded retaining nut, this is simply not the case.
Check for the Reverse Thread Blades
If you want to stay on top of your maintenance, make sure the blade isn’t threaded in the wrong direction.
Main Rule while maintaining the blade
As discussed, earlier the majority of the known lawn mowers are reverse threaded. Most of the bolts are standard fashioned, you just have to turn right to tighten whereas turn left to loosen.
Different Manufacturers Mowers Blade Reverse Thread
No. The bolt that holds the John Deere mower blades in place is threaded properly. To repair it, simply turn it clockwise like you would any other bolt. To release it, turn it to the cleaned outside, or counterclockwise.
How to remove blades safely
First, the wire should be detached from the spark plug. If you’re using a cordless mower, you’ll need to remove the battery pack.
SAFETY: Things to Look for While Removing the Blades
If you want to remove the bolt nut, you’ll need a socket torque wrench. If you use a different type of wrench, you risk damaging the blade or the wrench. To avoid damage or injury, it would be great if you strictly adhere to all safety precautions when using your mower. This method can be used to remove mulching blade.
Frequently Asked Questions (FAQs)
To remove the hex nuts that are holding the blades, turn the 1 1/8 inch torque counterclockwise. Remove the old blades from the axles of the mower deck and discard them. In some situations, just tilting the mower to replace the blade is more convenient than removing the deck and replacing the blade.
Conclusion
Always read the instructions before changing the blades on your mower. Cleaning and maintaining the blade and nut bolts after each usage is a simple way to keep them rust free.
What does it mean when a lawn mower is reverse threaded?
Just what does it mean to say that lawn mower blades are reverse threaded? First of all, the phrase does not refer to the blade at all, but rather to the bolt that holds the blade in place. That bolt connects the blade to the drive train which spins the blade and enables it to cut the grass.
Is a mower blade reverse threaded?
Some are and some are not. It depends on the manufacturer. While there is a common belief that most are reverse threaded the fact is a majority are threaded in the standard fashion (turn right to tighten and left to loosen). Let’s take a quick look at individual manufacturers to see if their mower blade bolts are standard or reverse threaded.
Can you hurt yourself removing a mower blade?
Injuries are all too common when removing mower blades. If you assume the bolt on your blade is reverse threaded and it is not you could hurt yourself trying to turn it the wrong way. You might also tighten it so much that you will need a special tool to remove it.
Is the bolt on my mower threaded?
Unless you have a specific reason to believe otherwise (for instance; the owner’s manual states the bolt is reverse threaded) it is fairly safe to assume that the bolt holding your mower blade in place is threaded in the standard fashion, since most of them are.
How do reverse thread nut lawn mower blades work?
Explaining How Lawn Mower Blade Reverse Thread Nuts Work. Most lawn mower blades turn in a clockwise direction. So, if the nut holding the blade in place is tightened in a c lockwise direction then it won’t loosen as the blade turns. Conversely, if you have a lawn mower whose blades turn in a counterclockwise direction, ...
What is the purpose of a reverse thread nut on a lawn mower?
This is to ensure that the nut and bolt holding the blade in place doesn’t loosen as the blade rotates.
What direction do mower nuts go?
Most nuts holding the mower blade in position will loosen in a counterclockwise direction. So, it’s just a case of loosening the nut and removing it. If the bolt is really tight, you might need to use a ratchet extension or a breaker bar to loosen it.
Why flip a lawn mower on its side?
Because you’ll be flipping the mower on its side, you want to ensure that there is no gas left in it. This is not necessary for an electric or cordless mower, of course.
Are lawn mower blades reverse threaded?
The answer to the question is yes and also no, which will be further expounded. The lawnmower blades are not threaded, but the nuts that hold them in position are reversely threaded.
How do mower blades function?
The blades of a typical lawnmower are the most interesting attributes and are responsible for neatly trimming the grass on a lawn. They are what many potential buyers look at first when they are browsing around home improvement centers to buy one.
How would you know if you have the mower blades on properly?
It is a common occurrence to install the lawnmower blades on the wrong side up. If this happens, the mower will not cut the grass the right way and eventually be damaged.
What are the different kinds of mower blades?
Lawnmower blades are an essential component of a lawnmower, and they might be the most important. Without it, you cannot cut the grass, which is what mowers are supposed to do.
Conclusion
After learning all there is to know about reverse threading and lawnmower blades, you have all the necessary information handy, whenever disaster strikes and renders the blades useless.
Why are mower blade nuts reverse threaded?
Generally speaking, most lawnmower blade nuts are reversely threaded to firmly secure the blade onto the drive shaft of the engine. This simply means that when the blade rotates, the bolt is not loosened or affected. It is worth remembering that not all blades are designed with a reverse thread bolt to secure them.
Why do lawn mowers use reverse threaded nut?
The reverse thread helps to secure the blade on the drive shaft such that the rotation of the blade does not loosen the nut. It is important to note that not all lawnmowers use a reverse threaded nut. There are still a lot of details to pay attention to in order to carry out the procedure easily and correctly.
How to keep a mower blade from turning?
Wedge a short wood block between the end of the blade and inside surface of the mowing deck to keep the blade from turning accidentally. Then use a wrench and socket to loosen the nut or bolt. To increase the leverage when loosening any stubborn fastener, you can slip a longer bar over the wrench handle. Step 4.
Which way do you turn the blades on a walk behind mower?
You’ll find that the blades on many walk-behind lawn mower models rotate to the right when you are mowing (that is, the clockwise direction). To remove the blade on this type of mower, the blade’s retaining bolt should be turned to the left or counterclockwise ...
How to loosen a bolt on a lawn mower?
Loosen the bolt by turning left (counterclockwise) using a 16mm socket. However, depending on the model of your lawn mower, the bolt head can be 1/2″ inch or 5/8 inch. To have more leverage, you should make use of a bigger socket wrench.
Why do you need gloves on a lawn mower?
This is why it is important to wear gloves while working to protect your hands from injury. It is also worth noting that some models of lawn mowers use a blade-lock tool to keep the mower in one place. These tools will prevent the blade from rotating when you’re trying to remove the bolt.
What is a lawn mower?
Lawnmowers are excellent garden or outdoor tools that help lawn owners to maintain their lawns and cut grass neatly. Just like any machine that you’ll find, lawnmowers also require regular care and maintenance, and removing the mower’s blade for the purpose of sharpening or replacement is one of the major maintenance tasks.
