Wire cutters, or pliers with diagonal and side cuts, are generally used for cutting wires. Wire cutters’ jaws are not typically designed to grip objects larger than bolts. They are considered pliers, however, since they can grip and remove nails.
What is the difference between wire cutting pliers and Electronics pliers?
Cutting pliers have sharp edges that can shear through thick electrical wire and nails/screws. Electronics pliers or micro pliers have a small and narrow jaw to easily cut delicate electronic components on circuit boards or delicate jewelry wire.
What are the best side cutting pliers?
IGAN-170 Wire Cutters, Precision Electronics Flush Cutter, One of the Strongest and Sharpest Side Cutting pliers with an Opening Spring, Ideal for Ultra-fine Cutting Needs. . . . . . . . . . . . . . . . Only 2 left in stock - order soon. . . . . . . .
What is the difference between Diagonal pliers and symmetrical wire cutters?
Many people find it difficult to distinguish diagonal pliers from other cutting tools. They usually do not know the difference between diagonal pliers and symmetrical wire cutters. Pliers are hand tools that are used to grab and hold objects securely as well as cutting and bending such material, example of which is wire.
Can you use flush cut pliers to cut wire?
So, after bundling wire cables and with zip ties in your cable management efforts, you can use flush cut pliers to cut the zip ties flush. In jewelry-making, flush cutters are great for cutting soft jewelry wire cleanly without leaving sharp ends.
Can you use pliers to cut wire?
Do not use pliers as a hammer. Do not hammer on pliers or wire cutters to cut wires or bolts. Do not extend the length of handles to gain greater leverage. Use a larger pair of pliers for gripping or a bolt cutter for cutting.
What type of pliers are used to cut wires?
Diagonal Cutting Pliers: This tool is used solely for cutting wire. The design of diagonal cutting pliers allows for strong indenting and wedging.
Is pliers a cutting tool?
Pliers are a multi-purpose hand tool with opposing jaws for gripping, bending and cutting.
What can I use instead of a wire-cutter?
It's possible to use a hacksaw to cut wire if no cutter is available. You'll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.
What are wire pliers?
They are handy for holding or bending flat or round stock, can crimp sheet metal, loop a wire, cut soft wire nails, remove cotter pins, and, if necessary, loosen or tighten a nut. The key to the versatility of this tool is the slipjoint that gives the pliers their name.
What are cutting pliers?
Definition of cutting pliers : pliers that have a cutting blade on the side of the jaws.
What's a wire cutter?
Wire and cable cutters are tools that have been designed to properly cut either wire or cable with minimal damage to the insulation or internal conductors of the wire or cable. Having a clean cut on a wire or cable can improve the quality of an electrical connection.
What are regular pliers called?
Ordinary (holding/squeezing) pliers may incorporate a small pair of such cutting blades. Pincers are a similar tool with a different type of head used for cutting and pulling, rather than squeezing. Tools designed for safely handling hot objects are usually called tongs.
Can long nose pliers cut wire?
Needle-nose pliers, also known as long-nose pliers and snipe-nose pliers, are both cutting and holding pliers used by artisans, jewellery designers, electricians, network engineers and other tradesmen to bend, re-position and snip wire.
How do you cut wire without pliers?
0:181:53How to cut wire without pliers - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm going to show you how to cut wire without using any employers it's pretty simple this is aMoreSo I'm going to show you how to cut wire without using any employers it's pretty simple this is a big bar here it's even hard to cut using my bolt cutters. But if you take it. And you bend it around.
What is the best tool to cut wire?
The Best Wire CutterOur pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips. ... Budget pick. Irwin Vise-Grip 2078307 7-Inch Diagonal Cutting Pliers. Quality at a bargain. ... Also great. Bahco 2101G-160 Ergo Cutting Pliers. Great features, not as strong. ... Also great. Klein 11054 Wire Stripper-Cutter.
How do you remove a wire without a wire cutter?
0:563:41How To Strip Wires Without Wire Strippers-Using Pliers InsteadYouTubeStart of suggested clipEnd of suggested clipHard because you will cut right through the wire. But squeeze them just a bit until you feel aMoreHard because you will cut right through the wire. But squeeze them just a bit until you feel a little bit of pressure and rotate. The wire. So continue rotating the wire.
Pliers: What Are They?
Pliers are primarily designed to grip items firmly. Turning, bending, or otherwise manipulating the objects becomes possible. In pliers, the handles join at the pivot point, and parallel jaws grasp an object. A plier that was designed specifically for a particular purpose may also feature additional components.
Pliers of various types
Pliers are one of the most versatile tools in an electrician’s toolbox. They come in a variety of shapes, sizes, and functions. Pliers can be used for gripping objects tightly or loosening them from something they’re stuck on.
Different Ways to Use Pliers
These hand tools have opposing jaws that allow them to bend and cut as well as grip surfaces. In addition to providing a great deal of leverage to the user, the cross metal limbs also multiply his hand’s strength. Toolboxes should include pliers because they serve many purposes around the house.
How to Use Pliers
A plier can be used for many different things, and they are also extremely simple to use. The pliers are some of the most versatile tools.
Safety Measures for Pliers
All tool users, whether amateur or professional, use pliers of various types. Some pliers are versatile, so they can be used for a wide variety of tasks. Pliers come in many shapes and sizes, each designed for specific jobs. Using these pliers will save you time and money. In general, you should follow the following safety rules to work safely:
1. Hose Clamp Plier
Hose clamp pliers are designed to squeeze the hose and spring clamp, ensuring that the joint is secure. They come in a variety of shapes and sizes. It also is known as radiator hose pliers and spring clamp pliers. Every jaw of this plier seems to have a peg-shaped tooth that pinches the clamp. Some models used the hose directly.
2. Crimping Plier
Crimping pliers are used as nutcrackers and have a fulcrum at the end. The wires are usually fed into the jaw jack first, followed by the connector. Crimping tools is another name for it. When you press the handle, the plastic coating is damaged and deformed, causing them to cling together and allow data to travel through.
3. Long Nose Plier
The jaws of this style of plier are conical and tapered in length. There is no cutting edge on these pliers. When a combination of pliers isn’t possible, they are employed instead. They are mostly employed in the gold smithy, radio, and television industries for creating wire hooks and bending wires. It can also be used to open bearing locks.
4. Diagonal Plier
The angled edge on the jaws of diagonal pliers is designed to cut through the thick wire. They’re quite durable and can even be used to trim nails. As a result, they’re helpful in carpentry and electrical operations. Wire cutter, the side-cutting plier, flush cut plier, and diagonal cutting plier is some of the other names for it.
5. Slip Joint Pliers
These are pliers that, as the name implies, allow adjustment to a wider range of aperture by slipping the two parts around the rivet or pin that links them. Because their jaws are actually square, they can only handle square objects. They can’t cut wiring or anything like that.
6. Snap Ring Plier
Snap ring pliers have narrow or round jaws to aid in the closure of snap plates. Those rings are indeed the open-ended ends of a dowel or other rounded object that fit perfectly into the grooves. C clip pliers, retaining ring pliers, lock ring pliers, and circlip pliers are some of the other names for this tool.
7. Tongue and Groove Pliers
Tongue and groove pliers are a form of movable pliers with a jagged groove and an upper handle that allows the lower jaw to be locked in a variety of settings. This tool’s jaws make it ideal for twisting nuts and bolts. Channel locks is another name for it.
What are safety wire pliers?
Safety wire pliers or lock wire pliers are a special type of pliers for twisting safety wire to secure critical fasteners. They have jaws and handles like regular pliers but one of the handles is fixed to a center barrel. The center barrel houses the twisting mechanism and the jaw locking mechanism. The pliers were invented by inventor Barry J.
How to use safety wire pliers
As I mentioned, safety wire pliers are the most reliable lock wiring. They make twisting safety wire an effortless exercise. To use them in your project, follow these simple steps:
How to choose the best safety wire pliers
It is possible to get it all wrong when shopping for safety wire twisting pliers. But with this guide, you can be sure to get a tool that ticks all the right boxes. So, these are the factors to consider.
How to determine wire cutters?
The first step in determining the best wire cutters for you is learning about the three different types of cutters available. While each one has a certain set of tasks for which they are specialized, most can be used for a variety of different purposes. Becoming aware of the differences, along with the additional functions each type is capable of performing, puts you well on your way to finding the variety most suitable for you.
What is wire cutter?
A wire cutter’s design can heavily impact its performance and ease of use. While you’ve already discovered the different types of wire cutters and learned about the advantages of multipurpose functionality, some wire cutters are designed to provide an all-in-one solution for cutting, stripping, crimping, and grabbing wires. These multipurpose tools typically have 10 or more individual slots for stripping wire, a needle nose plier head for grabbing, and a crimper at the base of the plier jaws.
What is a chrome vanadium wire cutter?
For professional-grade cutting power and durability, consider these chrome vanadium steel wire cutters that maintain a sharp cutting edge while offering superior corrosion resistance. In addition to the cutter and plier jaws that typical lineman pliers feature, these cutters also offer a crimper and stripper for optimal versatility and functionality. The 9-inch handle offers increased leverage for maximum cutting and twisting power, and it’s wrapped with a comfort-grip material that reduces fatigue.
What is a needle nose wire cutter?
Needle-nose. Needle-nose wire cutters are a variety of flush cut pliers that have a set of cutting blades flush to the outside and behind one of the plier’s jaws. However, with needle-nose models, the jaws taper down to a much smaller tip at the nose.
What is a diagonal plier?
As opposed to flush cut pliers, diagonal cutters are used exclusively for cutting. They feature a pair of curved cutting blades that extend all the way to the tip. Because the cutting blades are diagonally offset by about 15 degrees, they can be used to cut wires at an angle. Instead of cutting with a shearing action like scissors or flush cut pliers, diagonal pliers use a wedging action to separate the wire connections with their v-shaped cutting blades.
What is a plier jaw used for?
In addition to the cutting blades, the plier jaws can be used for cutting, gripping, and bending wires and small cables.
What is flush cut wire cutter?
Flush cut wire cutters (also called “combination” or “lineman’s pliers”) look like an ordinary pair of pliers but feature a pair of cutting blades flush to the outside edge and directly behind one of the plier’s gripping jaws.
