What is a plinth heater?
Plinth heaters are heaters that fit in small spaces to provide heat to a living space, like a kitchen or bath. They are typically made to fit in the “kick space” (next to the floor) of your kitchen or bathroom since this space is typically not used. The heaters can generate heat either electrically or via hot water.
Can a Myson plinth heater replace a radiator?
Because of the fan assistance, Plinth Heaters are very efficient at getting the heat out of the water and require a really good flow rate. Myson instructions specifically state "It is not recommended that this unit is used to replace a radiator in an existing system unless an adequate flow of water can be guaranteed."
What size plinth heater do I need for my Kitchen?
A common size of a plinth heater for kitchen use is 480 mm (width) X 220 mm (depth) X 125 mm (height). They are designed to fit in the kick space of a kitchen or bath, under some of the cabinets. Some plinth heaters are available in 80 mm height which is a little over 3 inches.
Can you plug a plinth heater into a thermostat?
Country: Whilst in theory, you could put a plug on it, the plinth heater should really be wired to a room thermostat (see newboy's post above) as per Part L of the Building Regulations. Myson make one specifically designed for the Kickspace.
How to get the most out of a central heating system?
Where are heaters located in a bathroom?
Can hydronic plinths be used for central heating?
Are plinth heaters worth it?
If you're looking to save space, lower your power bill, and improve the heating system in your kitchen, you should definitely consider a plinth heater. Unlike traditional radiators, kitchen plinth heaters don't hog your walls and floors; just install them at the bottom of your cabinetry, and voila!
Can plinth heaters run off central heating?
Our hydronic central heating plinth heaters are connected to the central heating system in the same way as traditional radiators to provide the heat. Our classic model plinth heating runs automatically when the central heating is turned on.
Are plinth heaters loud?
They're about as loud as a fan oven. And they would be OK with plinth lighting although you'd need a gap where the heater is. We're also going to put one in the bottom step of our hall too, to save space on the wall.
How do kitchen plinth heaters work?
Central Heating Plinth Heaters They come with flexible hoses, making it easy to connect the heater to your regular pipework and then position the heater just where you want it. When your central heating is switched on, hot water is pumped through the kickspace heater's fins just like it would with a radiator.
Do plinth heaters cost a lot to run?
Electric plinth heaters are usually more expensive to run than hydronic heaters, as they run independently from their own source of electricity.
Does a plinth heater sit on the floor?
The heater should be installed on a flat, even surface behind the plinth. The instructions will confirm the size of the opening needed for the heater and the required air gap around it. It is not recommended to position the heater on a carpeted surface if possible.
How do I choose a plinth heater?
Choosing the correct size plinth heater for your project is important. A good starting point is if you have an existing radiator allready in place. From this you can establish the size and type how many kw of heat it produces. Then you may want to consider if this heat was sufficient or maybe you needed a little more.
Which is the best Smiths plinth heater?
Best hydronic plinth heaterThermix KPH-1500. Of the three products we're reviewing today, Thermix's KPH-1500 is our favourite in terms of aesthetics. ... Bidex Diamond 500 hydronic plinth heater. ... Smith's Space Saver SS5.
What is a under plinth heater?
what is a plinth heater… It is a heater designed to be placed under the kitchen units, at the baseboard. They focus on the heat output at the lowest point of the room, allowing the heat to gently rise up to warm the rest of the room.
How can I heat a small kitchen without a radiator?
Here we will look at the choices available on the market and explain more about each option .Wall Mounted Traditional Radiator. ... Wet underfloor heating. ... Electric Underfloor Heating Mats. ... Hydronic Plinth Heaters. ... Electric Plinth Heaters.
How do you heat a cold kitchen?
Another option for warming up a cold room is installing electric toe-kick heaters. These small heaters with blowers fit into the hollow space under kitchen cabinets, stair treads and vanities. To power the heaters, you'll need to run a dedicated circuit from your main electrical panel.
How do I make my kitchen floor warmer?
A surefire way to improve flooring warmth is with an under-floor heating system. This system radiates heat through an underlayment between the subfloor and surface flooring. The purpose of a radiant heating system is to emit warmth directly upward into a floor, making it toasty beneath your feet.
What is a hydronic plinth heater?
A highly energy efficient fan convector that fits into a plinth of a kitchen unit eliminating the need for conventional radiators. This brings considerable space saving to allow you to design your kitchen.
How do you install an electric plinth heater?
2:186:24Space Saver Plinth Heater Installation Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp and bring that into the front of a plinth. Then. We can close the valves off refill. The systemMoreUp and bring that into the front of a plinth. Then. We can close the valves off refill. The system get the system up and running again. Then. We can fit the space saver at a later date.
Which is the best plinth heater?
Best hydronic plinth heaterThermix KPH-1500. Of the three products we're reviewing today, Thermix's KPH-1500 is our favourite in terms of aesthetics. ... Bidex Diamond 500 hydronic plinth heater. ... Smith's Space Saver SS5.
How much will my plinth heater cost to run?
If you are using a hydronic plinth heater which connects to your central heating, the additional cost of using a plinth heater will be very minimal...
Will a plinth heater be really noisy?
Plinth heaters are generally considered to operate at the same noise level as a humming fringe or a fan oven. The noise comes from the fan which is...
Will I be able to install a plinth heater by myself?
If you’re installing a hydronic plinth heater, get a professional plumber to fit it. The heater needs to be attached to part of the central heating...
Plinth Heaters | Heat & Plumb - heatandplumb.com
Plinth Heaters. A plinth heater is an awesome alternative to a radiator and is designed mainly for use in the kitchen or utility room. It is extremely space-saving and can be practically hidden depending on where you choose to position it.
Plinth Heaters - Plumbworld
The UK Plinth Heaters Shop. Huge Range of Plinth Heaters in stock. Lowest Online Prices - Checked Every Day. Free Next Day Delivery.
What is a plinth heater?
Plinth means a base of something, often supporting a column or other element. Plinth heaters are so named since they are typically installed at the bottom of a counter or cabinet where nothing exists but a kick space.
Where do plinth heaters fit?
Plinth heaters are heaters that fit in small spaces to provide heat to a living space, like a kitchen or bath. They are typically made to fit in the “kick space” (next to the floor) of your kitchen or bathroom since this space is typically not used.
What is a hydronic plinth heater?
Hydronic plinth heaters are typically fan-forced air heaters, where the hot water circulates through a coil and a fan blows air from this heat exchanger, and out into the room. The hot water either comes from a hot water boiler, or from a central heating system.
How many volts does a plinth heater use?
The plinth heater is 220 volts and heats the air locally, taking in cold air, heating it via wire coils, then blowing the heated air out into the room.
Does a plinth heater use a thermostat?
Therefore, in the latter instance, the plinth heater uses the thermostat of the central heating system as a controller.
NewhouseOldhouse
I have been advised to use a large plinth heater connected to oil heating in my kitchen as I am removing the old rads.
Mottie
I've only had an electric one once when we had no room in the kitchen for a radiator. Worked fine. I'm assuming yours would be a radiator plumbed in to the heating with an electric fan?
NewhouseOldhouse
I've only had an electric one once when we had no room in the kitchen for a radiator. Worked fine. I'm assuming yours would be a radiator plumbed in to the heating with an electric fan?
muggles
Depends on the size of the kitchen. The SS9 outputs about 2kW which is the equivalent of a 1 metre long double panel double convector radiator
Madrab
Make sure the systems nice and clean and well conditioned, plinth heaters can be sludge catchers due to the design of the HEX in them and the flexi's they invariably use.
ianmcd
They are great, dont fit it under the oven and hob if that is your set up, I did and it burns your feet when cooking
ianmcd
Kitchen is about 26m2 would the SS9 be sufficient? I am removing a rad and I take it this plinth is easy enough to install?
What are Plinth Heaters?
Plinth heaters are heaters that fit in small spaces to provide heat to a living space, like a kitchen or bath. They are typically made to fit in the “kick space” (next to the floor) of your kitchen or bathroom since this space is typically not used. The heaters can ]
Are Paraffin Heaters for Greenhouses Safe?
Paraffin heating is considered to be the safest way to heat a greenhouse or garden. Paraffin heaters are also one of the most economical methods of providing light and heat for your plants. It is a good alternative to the cheaper types of heating systems which only have limited options ]
How to get the most out of a central heating system?
To get the most out of your central heating system and make it as efficient as possible you can try a number of things including regular servicing and ensuring the room and radiator thermostats are set correctly. Checkout the following video on how to set your systems thermostats correctly.
Where are heaters located in a bathroom?
If your short on time then to summarize they are heaters that tend to be found in kitchens and bathrooms and are positioned in the plinth area or floor level . You may not have really noticed these types of heaters due to them being so low to the ground hidden under kitchen bathroom units. This type of heater can be power electrically, using hot water (hydronic) or dual fueled.
Can hydronic plinths be used for central heating?
In terms of cost if you already have a central heating system installed then opting for the hydronic plinth heating system will allow you to benefit from just extending the existing pipe work to the newly installed heaters. This may allow you to heat a greater proportion of the house with the existing heating system.
