Pool heaters can pose serious fire and carbon monoxide Carbon monoxide is a colorless, odorless, and tasteless flammable gas that is slightly less dense than air. It is toxic to animals that use hemoglobin as an oxygen carrier when encountered in concentrations above about 35 ppm, although it is also produced in normal animal metabolism in lo…Carbon monoxide
Propane
Propane is a three-carbon alkane with the molecular formula C₃H₈. It is a gas at standard temperature and pressure, but compressible to a transportable liquid. A by-product of natural gas processing and petroleum refining, it is commonly used as a fuel. Propane is one of a group of lique…
Are swimming pool heaters safe to use?
Most Swimming pools are heated with natural gas or propane. The heater poses some dangers which should be mitigated. One danger is carbon monoxide poisoning when it’s inhaled. Another danger that can come from the swimming pool heater is fire when lines become block by things like leaves and debris.
Can poor water chemistry damage a pool heater?
However, even a heater that has been perfectly installed can be damaged by poor water chemistry. Unbalanced water is a recipe for leaks and failures in pool-heaters; chief among these is low PH!
What are the pros and cons of gas pool heaters?
Gas-fired swimming pool heaters are a great way to improve comfort and lengthen the swim season. But poor installation and water care failures can shorten the life of the heater. Good performance and a long and productive heater life begin with sensible installation of the unit.
Should I buy an inground or above ground pool heater?
To keep pool water at an elevated temperature that makes swimming earlier or later in the season more pleasant, consider investing in an above ground pool heater. Some inground pool heaters are too powerful for above ground pool set-ups.
Why are hotel pool heaters dangerous?
Is a Jandy Lite 2 pool heater dangerous?
Is Jandy a combustible gas?
Can a pool heater explode?
There are millions of natural gas and propane swimming pool heaters in use across the USA and the world. You would be hard-pressed to find an incident with one of them that has caused them to explode while in use. That's despite the fact that these devices have been in use on swimming pools for several decades now.
Does a pool heater need to be vented?
Each heater model has specific venting requirements to ensure proper combustion and prevent sooting. Manufacturers express venting requirements as square inches of net free air. A typical requirement is 1 square inch per 1,000 BTUs of input for an unobstructed opening.
Is it safe to run a pool heater at night?
Not only will it be tough to keep the heat in your pool on colder nights but you will also spend a fortune trying to heat your swimming pool. So unless you have money to burn, it's best not to run your heater at night on an uncovered swimming pool.
Is it normal to smell gas from pool heater?
It isn't normal to smell gas from a pool heater because it means something's leaking or burning inefficiently. You should know where the gas shutoff valve is located, so you can turn it off if you start smelling gas while using the heater. This simple tip can save plenty of repairs and provide peace of mind.
Can you put a pool heater under a deck?
Do not install a gas pool heater under a deck. You must vent the heater if it's being installed in a pool house. Install the heater within 15' of equipment for optimal heating.
Where should a pool heater be installed?
Install the heater as close to the filter as possible and approximately 25 feet away from the swimming pool. Installing the unit any farther may cause heat loss since tubing is underground. An "ideal" installation will have about 24" of clearance around the unit with no obstructions above.
Is it better to heat a pool at night or during the day?
0:212:26It's better to run the heat pump during the day because it's more energy efficient during the dayMoreIt's better to run the heat pump during the day because it's more energy efficient during the day because it takes the warmer ambient air and transfers that to your pool.
Can I leave my pool heater on when the pump is off?
The only thing you need to consider is if your system is below grade. If it is the heater can actually remain on while the pump is off because the pressure switch (a lot of heaters use a pressure switch, not a flow switch) will still be triggered. This can cause your heater to heat the stagnant water.
Should I turn off pool heater?
Also, turn the temperature down or turn off the heater whenever the pool won't be used for several days. This will save energy and money. It's a myth that it takes more energy to heat a pool back up to a desired temperature than you save by lowering the temperature or turning off the heater.
Can a pool heater cause carbon monoxide poisoning?
1. Carbon monoxide. Just like a car engine, gas pool heaters cause carbon monoxide poisoning if inhaled for too long, as demonstrated by this news story. To avoid this danger, make sure your pool heater is properly ventilated.
Is it normal for a pool heater to smoke?
When you buy a new heater and start it for the first time, you may notice an alarming amount of smoke for the first few minutes of operation. This is because the manufacturer coated the burner parts with a thin coat of oil to protect them from rust. The smoke is normal and unavoidable, and it goes away quickly.
Why does it smell like gas when my heater is on?
The gas valve controls gas flow into the furnace through gas lines. If a gas line or valve leaks, you'll notice a strong gas smell around the furnace. Gas lines leak due to improper installation, age, and accidental damage. You'll require a professional to inspect and repair your furnace if you smell gas around it.
Why are hotel pool heaters dangerous?
Why are hotel pool heaters so dangerous for carbon monoxide poisoning? The answer is probably is as simple as they have the same danger of incomplete combustion as any other fuel burning appliance, but they get forgotten in the routine maintenance process. Hotel pool heaters use natural gas to heat water, like any other hot water heater or boiler elsewhere in the hotel. But hotel pool heaters are probably not located in the mechanical equipment room of the hotel, but near the pool. Thus, system checks and preventative maintenance that gets done elsewhere, may not get done on these heaters.
Is a Jandy Lite 2 pool heater dangerous?
Let us begin at the beginning when plans were made to move a pool heater system from a Sleep Inn to the Best Western to replace an old system. In 2011 a used Jandy Lite 2 pool heating system was installed at the Best Western. No place is more dangerous than a hotel for carbon monoxide poisoning, not only because there can be so many people exposed to a CO leak, but people are often sleeping when the exposure happens. Thus, if there is a leak, there is a high likelihood of a fatality, since people may never wake up to realize they are being poisoned. A used and worn HVAC pool heater should never have been used to heat this pool.
Is Jandy a combustible gas?
First and foremost, the propane run hotel pool heater Jandy system was not to be converted to any other type of combustible. Propane and natural gas have different octane. Propane burns hotter than natural gas and requires less fuel for the amount of oxygen to be burned. If the fuel gas mix isn’t right, the flame will either not stay lit, or there will be too much fuel, guaranteeing large amounts of carbon monoxide in the exhaust.
What are the dangers of gas heaters?
In both cases, the danger is carbon monoxide, a deadly but invisible gas whose odor is extremely difficult to detect.
Can a pool heater cause carbon monoxide?
Because a pool heater, like a residential boiler, burns gaseous fossil fuel, any hang-ups in the flow of that fuel can create carbon monoxide leaks, which may add up to serious flammability hazards over time.
1. Pool Heaters Work Similarly to a Water Filter
Whether you’re regularly using your pool, or have decided to close it until next summer, regular maintenance is important. One way to clean a pool is by utilizing the filter. The filter takes water from the pool, funnels it through a filter, removes debris then filters the clean water back into your pool. Pool heaters work the same way.
2. There Are Three Kinds of Pool Heaters: Gas, Solar and Electric
Gas heaters rely on propane or natural gas in order to properly heat your pool. This may be best for you if the cost of electricity is high in your area or you have access to low-cost natural gas. While gas emissions can be harmful to the environment, gas pool heaters warm your pool quickly, and are great for year-round use.
3. Air Temperature Affects the Efficiency of Your Heater
Environmental factors are something you should take into account when considering your pool heater. Things like the air temperature and wind speeds contribute to just how fast you can actually heat your pool water.
4. Pool Heaters Are Not One-Size-Fits-All
Since pool heaters and pumps are sized based on their heating capacity, you really have to be mindful of the size of your pool when shopping for heaters. Heating capacity is determined by measuring how much energy is required to heat one gallon of water. So, the more water in your pool, the stronger your heater needs to be.
5. Solar Panels Can Save You Thousands of Dollars
Solar panels are popular for being good for the environment, but they’re also pretty good for your wallet, too. Solar-powered pool heaters can be purchased for as low as $150. If you live in a sunny area, you could save a lot on heating your pool.
What causes low PH in water heater?
Low PH makes Chlorine more aggressive. Your water might look clear but low PH can only be detected by proper water testing. Other issues include high chlorine levels , high TDS and High SALT and high calcium. These conditions can also play havoc with heaters.
What does it mean when your pool water is unbalanced?
Unbalanced water is a recipe for leaks and failures in pool-heaters; chief among these is low PH! Anytime PH gets low-which means your water has gone from something fairly neutral to acidic-it begins to attack the copper tube bundles in the heat exchanger.
Do it yourself pool heaters?
Do-it-your selfers can slip-up with the fine points of the installation, and that blunder with a gas-fired swimming pool heater can cost a lot more than just lost money. Gas-fired swimming pool-heaters should be treated with respect and installed by people who know exactly what they’re doing.
Is a gas pool heater good?
Gas-fired swimming pool heaters are a great way to improve comfort and lengthen the swim season. But poor installation and water care failures can shorten the life of the heater. Good performance and a long and productive heater life begin with sensible installation of the unit.
What are the dangers of a pool heater?
The heater poses some dangers which should be mitigated. One danger is carbon monoxide poisoning when it’s inhaled. Another danger that can come from the swimming pool heater is fire when lines become block by things like leaves and debris.
Why is my water heater not hot enough?
If your water heater is giving out water that is not hot enough, it is a sign that your heater is about to fail. It’s usually a sign that sediments have amassed inside the tank add are blocking the burner from transferring heat to the water which means water is not receiving enough heat. The burner has to work harder to heat the water. The consequence of this is the high consumption of electricity and gas. It eventually triggers leaks, and you have to replace the entire system.
Why do water heaters have anode rods?
To protect the tank from rusting, water heaters are installed with an anode rod for drawing in rust that is in water. However, the anode rod can fail which results in rust getting into the tank and then it spreads inside. When this happens you will need to contact a plumber to replace the anode rod.
How long does a tankless water heater last?
You can expect a tanked water heater to last for about 12 years, and a tankless water heater will last for about 20 years. If your home water that has lots of sediments which lead to a faster rate of deterioration, it’s advisable you install a sediments filter to increase the water heater life.
What is a faulty water heater valve?
Faulty pressure valves. When plumbers are trying to diagnose the problem with a faulty water heater, one of the most common issues is defective valves. Failing valves are common in both tanked and tankless water heaters. Water heater pressure relief valve helps to regulate the pressure that is caused by rising in water temperature.
Why does my water heater make a popping noise?
When a water heater starts to make a popping noise, it means a shell of sediments is covering the burner at the bottom of the tank, and the burner is heating water while it’s under a shell of sediments. If the sediments are not removed, the whole heater will be damaged.
How to stop water heater from popping?
If you are using an electrical heater switch off the electrical power at the circuit breaker and for gas, the heater turns off the gas supply. Then drain the tank.
What is inside a pool heater?
Inside the On-demand pool water heater, you will find a heating element, which is a high resistive nichrome wire. Some brands protect the nichrome wire with an additional rustproof metallic tube. Whole heating elements remain wrapped by sharp fins, and water flows through them.
When was the pool heat pump invented?
It was invented in the 18th century , and still, now that is the most efficient way of heating or cooling both air and water. All air conditions work on this mechanism, and a giant pool water temperature can be raised using a heat pump. Even, this is the most energy-efficient way of increasing the water temperature.
Can you buy an inground pool heater too often?
Nobody buys an in ground pool water heater too frequently. If you invest in a great unit that will serve you for decades. So the quality and capacity are uncompromisable cause it’s going to be a long time bound with this pool heater.
Is an on demand pool heater cheaper than a heat pump?
An on-demand electric heater shouldn’t even compare with a heat pump at all. But the on-demand pool heater is excessively cheap comparing to the heat pump. The heat pump is far more energy-efficient. Again the heat pump can raise the water far faster than an on-demand pool heater.
Can solar panels absorb heat?
So we don’t feel it in the environment. But the solar tubes can absorb the entire heat from sunlight and make the water hot. But the weather never remains clean every day. So if you install a solar pool heater, additionally, that would be a great solution cause it’s entirely free for your entire life.
Can EchoSmart inground pool heater be installed on demand?
If you require an instant, effortless pool water heater installation, then the EchoSmart On-Demand Inground Pool heater is unbeatable. You need to connect the heating unit with the water inlet and outlet and connect it with the power socket.
How big is a smart pool heater?
The SmartPool Solar Heater includes a single panel array that is 4 feet x 20 feet.
Why do pool heaters rust?
This is because many pool heaters have copper heating elements inside. The salty water can eventually cause rusting of the interior components. A pool heater with a cupronickel heat exchanger is better protected against the corrosive nature of saltwater and is a better choice for this type of pool.
What is a BTU in a pool?
A BTU (British Thermal Unit) is the measure of how much energy is required to raise the temperature of 1 pound of water by 1 degree Fahrenheit. You can approximate what type of BTU heater you need for your pool by multiplying your pool’s water capacity in gallons by the weight of a single gallon of water (8.6 pounds).
What is a spruce pool heater?
The Spruce / Chloe Jeong. A pool heater means you can start swimming sooner and extend your season longer. These units work in tandem with your pool pump to warm pool water to a pre-set temperature and are compatible with both inground and above ground pools.
How long does it take for a gas pool heater to heat up?
It’s not uncommon for a gas pool heater to be able to raise temperatures by 5 degrees or more in less than 12 hours.
How does a solar panel heater work?
Instead of relying on gas, propane, or electricity, a solar panel heater absorbs energy from the sun’s rays. The solar heater then use s this energy to heat water passing through the panel from your pool pump. The warmer water is then returned to your pool.
How to raise pool temperature without leak?
If you want to raise your pool’s temperature without springing a major leak in your finances, consider a budget pool heater. The SmartPool SunHeater system is a solar-powered pool heater that utilizes the sun’s energy to warm your pool gradually.
Why are hotel pool heaters dangerous?
Why are hotel pool heaters so dangerous for carbon monoxide poisoning? The answer is probably is as simple as they have the same danger of incomplete combustion as any other fuel burning appliance, but they get forgotten in the routine maintenance process. Hotel pool heaters use natural gas to heat water, like any other hot water heater or boiler elsewhere in the hotel. But hotel pool heaters are probably not located in the mechanical equipment room of the hotel, but near the pool. Thus, system checks and preventative maintenance that gets done elsewhere, may not get done on these heaters.
Is a Jandy Lite 2 pool heater dangerous?
Let us begin at the beginning when plans were made to move a pool heater system from a Sleep Inn to the Best Western to replace an old system. In 2011 a used Jandy Lite 2 pool heating system was installed at the Best Western. No place is more dangerous than a hotel for carbon monoxide poisoning, not only because there can be so many people exposed to a CO leak, but people are often sleeping when the exposure happens. Thus, if there is a leak, there is a high likelihood of a fatality, since people may never wake up to realize they are being poisoned. A used and worn HVAC pool heater should never have been used to heat this pool.
Is Jandy a combustible gas?
First and foremost, the propane run hotel pool heater Jandy system was not to be converted to any other type of combustible. Propane and natural gas have different octane. Propane burns hotter than natural gas and requires less fuel for the amount of oxygen to be burned. If the fuel gas mix isn’t right, the flame will either not stay lit, or there will be too much fuel, guaranteeing large amounts of carbon monoxide in the exhaust.
