What colors do SATA cables come in?
March 31, 2015 SATA cables come in varied colors besides blue and red, including black, yellow and orange. Red SATA cables are no different from blue SATA cables. SATA hard drives require two cables, one with 15 pins to supply power and one with 7 pins to carry data.
What is the difference between SATA cables?
Some SATA cables even glow in the dark. The differences among SATA cables depends on the types of connector they use and the way you set up your computer hardware. Their colors may help you distinguish among the devices your SATA cables connect, but color alone doesn't signal functional differences among them.
What do red & blue SATA cables mean on a computer?
A mixture of red and blue SATA cables could indicate that a computer's SATA devices don't all connect to the same bus. Some custom PC builders may designate the different buses with different colored cables. On a motherboard that lacks enough SATA ports to meet a your needs, you can plug in a PCI card to add extra SATA ports.
What type of SATA cable does my computer need?
When installing new internal or external hardware on your computer, you need to know which SATA cable connection it needs so that you can connect the correct ports and cables. There are three main types of SATA cable connections for computers: standard two-connection SATA cables, three-connection SATA cables, and eSATA cables.
Why are my SATa cables blue and red?
What is esata cable?
What is the difference between a red and blue SATa cable?
How many pins does a SATa hard drive have?
What colors are SATa cables?
Can a SATA cable be used as an external drive?
See 3 more
About this website
What Colour are SATA cables?
SATA cables come in varied colors besides blue and red, including black, yellow and orange. Some SATA cables even glow in the dark. The differences among SATA cables depends on the types of connector they use and the way you set up your computer hardware.
Are SATA ports color coded?
The different versions of SATA are not compatible with each other. A SATA I drive will not work in a SATA II or SATA III port, and vice versa. SATA drives are usually color-coded to indicate which version they are. SATA I drives are usually red, SATA II drives are usually blue, and SATA III drives are usually black.
How do I identify a SATA cable?
There are two principle SATA cable connector types – power and data. The simplest way to identify the difference between the two types is that data is the smaller of the two (typically 7-pin) whereas power is larger (typically 15-pin).
Is there a difference between red and blue SATA cables?
The answer is NO. The color don't make any difference... I have both Blue and Red colored cables and the performance is the same. Yes you can plug/connect your old drive to your new computer.
Is every SATA cable the same?
The simple answer to the question “are all SATA cables the same?” is a yes. As far as the performance goes, ALL SATA cables are the same. Therefore, if you have a very old SATA cable lying around and and you want to use it on your shiny new motherboard for connecting a new hard drive, you most certainly can use it.
Does it matter which way SATA cable goes?
The cables are not directional. Use them whatever way fits best.
Are SATA cables universal?
They're interchangeable. All SATA is backward (and forward) compatible.
Are SATA 2 and 3 cables the same?
SATA II vs. SATA III Cables - Is there a Speed Difference? (No!) The results are effectively identical. There is no measurable difference between differently-branded SATA cables as we tested.
What does an HDD SATA cable look like?
SATA cables are long, 7-pin cables. Both ends are flat and thin, with one often made at a 90-degree angle for better cable management. One end plugs into a port on the motherboard, usually labeled SATA, and the other (such as the angled end) into the back of a storage device like a SATA hard drive.
Can you mix and match SATA cables?
The point is: Don't mix and match modular cables. If you've got too many, throw them in a bag and label the bag for each PSU. If you're unsure of if a cable belongs to a PSU, set it aside until you (A) figure it out, or (B) buy a replacement that is known-good.
Are both ends of a SATA cable the same?
Installing SATA DATA cables is fairly straight forward. Since both connectors on either end are identical you can use either either end on hard drive or on the motherboard.
Is there a difference between SATA 1/2 and 3 cables?
Yes. There is no difference in the cables. They have not changed with SATA revisions.
Are SATA connectors universal?
They're interchangeable. All SATA is backward (and forward) compatible.
What does a blue SATA port mean?
They are the chipset SATA ports and should not require extra drivers when installing Windows. The blue ones are extras, added on by the mobo mfg, and require drivers installed before they can be accessed by Windows.
Are all SATA ports on motherboard the same?
There can also be instances where your motherboard has SATA ports of different generations. Though the SATA interface provides backward and forward compatibility, we recommend connecting a drive to a port of the same generation for optimal performance (for example a SATA 3 drive to a SATA 3 port on the motherboard).
Why is SATA red?
Usually, the color that has the most ports are the Primary SATA controller ports (usually black). The color that has even number of ports (usually 2) are RAID-capable (if your motherboard supports it, and I've seen yellow and red), and the secondary SATA controller ports are usually red in color.
How to determine a cable is SATA 2 or 3? | Tom's Hardware Forum
In my motherboards' box i found 2 types of SATA cables intact, 2 blue and 2 red. I red lots of stuff to know which is SATA 3 and which is 2, but i couldnt find any useful information except this picture.But all 4 looks the same, the blue ones were in my current motherboard which supports SATA 3 and the text means 6Gbps/3Gbps so i guess that is SATA 3.
Solved: Is the colour of SATA cables significant? - Dell
Hi Jackdaw13,. SATA cables are available in different colors (red, blue, orange). Dell uses orange and blue as standard for most of the systems. Technically speaking, there is no difference and doesn't matter what color they are.
Does it matter which SATA port I use on the motherboard?
Your motherboard may use two SATA controllers, the one that is part of the chipset, and a secondary controller from a company like ASMedia. Conventional wisdom is that it's best to attach an SSD to a chipset controller SATA 3 port.
hard drive - What do the different colours of the SATA ports on my ...
I've bought a new hard drive for my system, and my motherboard (an ASUS M2A VM HDMI) appears to have two black and two red SATA ports, with the existing hard drive and DVD drive plugged into the red ones.. I'm having a fair bit of difficulty in getting a clear answer from the internet what, if anything, these colours mean, and if they have any impact on how I should configure the existing and ...
SATA Connector on Motherboard – Which One Should You Use?
A viewer on one of my Anet Computers’ YouTube channel video asked me a question about Serial AT Attachment. Which sata connection should optical drive be connected to? should it be #4?
What color cables are used in Dell laptops?
SATA cables are available in different colors (red, blue, orange). Dell uses orang e and blue as standard for most of the systems. Technically speaking, there is no difference and doesn't matter what color they are. The functionality remains the same for all of them.
What color is SATa cable?
SATA cables are available in different colors (red, blue, orange). Dell uses orange and blue as standard for most of the systems.
What is the sleeved wire on an Asus sata?
In the pictures, the sleeved wires are all the signal wires, and the unsleeved are the ground wires. You can see that all the cables have the same gauge of signal wire, although the Asus SATA 6Gb/s and the Intel SATA 3Gb/s both have an additional ground wire. This is not for performance reasons, but simply due to the design of the cable.
How many MB per sec for 3 GB?
It may be a problem when you use some drive which can support more than 500MB per sec since for 3 Gb/s cables just guarantee only 384 MB per sec
How fast is 500 MB/s?
Keep in mind that SATA is 8-to-10 encoded and the name refers to this higher rate, so 500 MB/s is 5 Gbps. Also, the physical layer is still transmitting at a 6 Gbps rate. Otherwise, yeah, the test could definitely be improved...
Do latches work on SATa cables?
In our experience, the latches work great to keep the cables seated. This may not be a huge deal for users that build their own computers, but since we ship nearly every system we build they greatly reduce the number of times the cables come unseated in shipping. We build and ship hundreds of systems a month here at Puget Systems, and we have nothing but good things to say about SATA cable latches.
How many gigabits is 500MB/s?
Saturate the bus at its full spec' length; see what happens across a broad selection of 3 and 6Gb/s cables. 500MB/s = 4Gb/s. You need to hit >750MB/s to really test a 6Gb/s cable. Tiny differences in insulation thickness and capacitance make a proportionally bigger difference to signal quality the harder you drive the connection; it'll still *work*, but increasing error correction and data re-requests will begin to eat into the maximum bandwidth on a low quality (not necessarily inexpensive) cable.
What is the throughput cap for RAID0?
Point of order: No. A bank of drives in RAID0 have a throughput cap of 56k if accessed over POTS.
Can a 3Gb sata work with a 6Gb sata?
In conclusion, our testing has agreed 100% with SATA-IO's statement that SATA 3Gb/s cables will work perfectly fine with SATA 6Gb/s drives. This wasn't much of a surprise to us, but it is always nice to have hard data backing up a claim.
What chipset is used in HP 550-200?
Since I don't have your specific product number to check what chipset you have, an HP search revealed there are two possible chipsets used in the 550-200 series motherboards: 1. H110 ( Intel specs here) Four SATA ports on the H110. 2. FCH (A78) ( AMD specs here) Six SATA ports on the AMD A78.
How many SATA ports does the A78 have?
2. FCH (A78) ( AMD specs here) Six SATA ports on the AMD A78. It looks like both motherboards support SATA III. HP could have modified the board to limit SATA III by using the slower SATA II on some ports.
What color is a SATa port?
HP used to use the dark blue color to designate a SATA III, 6GB data transfer rate port reserved for the primary boot drive. But your PC was introduced by HP in 2016. All SATA ports on your PC's motherboard could be SATA III ports. Older HP PC's had a mix of SATA III and SATA II ports.
How to check if SSD is SATA?
Select the SSD and check the transfer mode. It should show SATA/600.
How to report fake HP support message?
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Does HP motherboard support SATA III?
It looks like both motherboards support SATA III. HP could have modified the board to limit SATA III by using the slower SATA II on some ports. I would not know this.
Is the color of the SATA ports based on an industry standard?
I don't think the color of the SATA ports is based on an industry standard.
How to check if a SATa cable is eSATA?
If one of the connectors has 4 large pins inside, it is a standard SATA cable. Step 3: Check the size of the cable connector. If both cable connectors are thin and do not have large pins , it is an eSATA cable. Step 4: Use a SATA cable with 3 connection ...
How to choose a SATa cable?
Here is how to determine which one you should choose: Step 1: Use a SATA cable with 2 connection plugs. Step 2: Check the connectors on the cable. If one of the connectors has 4 large pins inside, ...
What is a low profile SATa cable?
Low Profile SATA: Ultra-thin SATA cables with low profile connectors that can be used with longer graphics cards.
How many SATa drives are there on a motherboard?
Drive Support. Although there are usually only 2 PATA connections on the computer motherboard, there will usually be 4 to 6 SATA connections, which allows multiple SATA hard drives to be connected at once.
What is a SATa cable?
The SATA cable is mainly used to connect the internal hard drive to the computer motherboard. It can also be used to connect a hard drive to a hard drive, and connect ATA and ATAPI devices to the computer motherboard, and connect to an external computer.
How much data can a SATa drive transfer?
Version 1 of the SATA cable can transfer 1.5 GB data per second, version 2 can transfer 3 GB data per second, and version 3 can transfer 6 GB data per second.
Which cable is faster, SATa or PATA?
PATA cable supports multitasking well when transferring data. This makes them much slower than the SATA power cable. The increased data transfer speed of the SATA a cable allows programs, pictures, and large files to load faster and smoother games.
What pins are used for hotplugging?
One pin from each of the three voltages is also used for hotplugging. The same physical connections are used on 3.5-inch and 2.5-inch notebook hard disks. Pins 3,7,13 are pre-charge. Pin 11 can be used for activity indication and/or staggered spin-up.
What is pin 11 on a SATA drive?
Pin 11 can be used for activity indication and/or staggered spin-up. If pulled down at the connector (as it is on most cable-style SATA power connectors), the drive spins up as soon as power is applied.
What is a Molex 67581-0000?
Molex 67581-0000 used for cable connector and Molex 67582-0000 used for terminals connector.
Why is 3.3 volt common?
That may be because there are too many people using adapters so the drive makers don't want the headaches which come with using 3.3 volts. But in the future, 3.3 volt drives may become common so you need to be careful when using SATA power cables which don't implement 3.3 volts.
What Do Different Colored Ethernet Cables Mean?
Ethernet cables are a very common type of cable used in computer networking. They are used both in residential and commercial applications when a wired network is desired for data sharing and access to the internet. Most often an internet router uses ethernet cables in order to connect to a cable modem and will come with the kit your cable company sends you when you first sign up for services.
What are the colors of Ethernet cables?
One color isn’t “better” or “faster” than another cable, but the colors can help denote the intended application. The most common colors seen with ethernet cables are grey, blue, yellow, orange, and white. If the ethernet cable is destined to be outside, ...
Why is my Ethernet cable black?
If the ethernet cable is destined to be outside, it will often be black and waterproof to help it survive longer in the elements. As we’ve seen, the meaning of the color of an ethernet cable can vary depending on the where, who, and why of the intended environment.
What is TIA cable?
The TIA is accredited by the American National Standards Institute (ANSI) to create and maintain industry standards, including those for color-coding used in cable manufacturing. While these are some of the closest to standards that exist today, most of the TIA’s wiring color management schema is still viewed as a recommendation rather than a requirement. Until universal adoption takes place, there will most likely be many different colors used in ethernet cable colors.
What is the difference between green and yellow Ethernet cables?
Green Ethernet: Green ethernet cables can be used to classify a crossover connection, which are used to connect different computers and/or devices directly together. Yellow Ethernet: Yellow ethernet cables are generally used for what’s known as “power over internet” (POE) connections.
What is the IEEE standard?
The Institute of Electrical and Electronics Engineers (IEEE), a worldwide trade association , does, in fact, issue guidance for standardization in electrical design, but the key point is that their standards don’t actually get into the details of specifying cable colors as they pertain to a specific purpose or function.
What is blue Ethernet?
Blue Ethernet: blue ethernet cables are usually used for terminal server connection. A terminal server makes connections to multiple systems to a LAN network possible without having to use a modem or other network interface.
Why are my SATa cables blue and red?
A mixture of red and blue SATA cables could indicate that a computer's SATA devices don't all connect to the same bus. Some custom PC builders may designate the different buses with different colored cables.
What is esata cable?
eSATA. Some cables support external SATA, or eS ATA, devices. Like USB and FireWire drives, these devices connect to the computer externally through an eSATA port. Although eSATA and internal SATA cables may incorporate connectors that look identical, looks can be deceiving.
What is the difference between a red and blue SATa cable?
Red SATA cables are no different from blue SATA cables. You can connect a new hard drive with a blue cable in a system that uses red cables for existing devices. Some component manufacturers color code the slots or ports on their motherboard designs, but unlike sound cards and peripheral ports, which use a standard color code, ...
How many pins does a SATa hard drive have?
SATA hard drives require two cables, one with 15 pins to supply power and one with 7 pins to carry data. Both cables connect to the rear of the hard drive. The drive's power cable connects to the power supply unit, or PSU. The data cable, which sometimes come packaged with the drive, connects to a SATA slot on the motherboard.
What colors are SATa cables?
SATA cables come in varied colors besides blue and red, including black, yellow and orange. Some SATA cables even glow in the dark. The differences among SATA cables depends on the types of connector they use and the way you set up your computer hardware. Their colors may help you distinguish among the devices your SATA cables connect, ...
Can a SATA cable be used as an external drive?
Some cables support external SATA, or eSATA, devices. Like USB and FireWire drives, these devices connect to the computer externally through an eSATA port. Although eSATA and internal SATA cables may incorporate connectors that look identical, looks can be deceiving. The connectors differ and the cables can't substitute for each other. If you accumulate a collection of spare cables, label them clearly so you can distinguish among them without trial and error.
