Bruce hardwood floors are reliable and durable floor products for your home. When the finish of Bruce hardwood floors becomes worn, you can restore it by refinishing the flooring yourself. By sanding the old finish off and applying a new finish, your Bruce hardwood floor will look like new.
How do you clean Bruce hardwood floors?
Part 1 Part 1 of 3: Cleaning Up Dirt and Debris
- Sweep daily with a broom. Loose pieces of dirt and small stones may be tracked into your house on a daily basis.
- Vacuum the floor gently. If you’d prefer not to use a broom—or want to make doubly sure that you’ve cleaned up all dirt from the hardwood—you can use a ...
- Mop your hardwood with a dry microfiber mop. ...
- Mop your floor with a slightly damp mop. ...
How to maintain Bruce hardwood floors?
How do you maintain Bruce Hardwood Floors?
- Use a vacuum, broom or dust mop once a week or more to pick up dust and dirt.
- Pick up spills and tracked-in dirt immediately with a soft cloth and the recommended cleaner.
- Clean the entire floor periodically with a recommended cleaning product.
- Avoid harsh chemical cleaners like ammonia, bleach or harsh detergents.
How to restore hardwood floors without sanding?
Case #2: Non-Waxed Floors
- Clear and Clean the Area. The first step here is to clear the area of all furniture and belongings. ...
- Apply the Liquid Abrasive and Scrub. In your liquid abrasion kit, you should have a scrubber pad with a wooden block, one that allows you to screw your ...
- Reclean the Floor. ...
- Take Care of the Worst Damage. ...
- Apply the Finish. ...
Can prefinished wood floors be sanded and refinished?
Refinishing requires heavy sanding: While prefinished floors do not need to be refinished for a very long time, eventually the surface seal will start to fade, scratch, and discolor slightly. This cuts down on the thickness of the floor planks and limits how many times you can then refinish the floor in the future.
Can you refinish Bruce pre finished hardwood floors?
Pre-finished hardwoods can be sanded and refinished. We do it all the time! Most of the pre-finished flooring has a bevel in between each board.
How do you tell if hardwood floors can be refinished?
Water Test. Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.
Can you change the color of Bruce hardwood floors?
The answer is usually YES! Many homeowners don't realize that you can change the color of hardwood flooring when you refinish your floors. Yes, it's true…you can go light or dark or red tones or anywhere in between. Most are pleasantly surprised it doesn't matter if you are going light to dark or vice versa.
What kind of finish is on Bruce hardwood floors?
gloss urethane finishOVERVIEW. Fresh Finish from Bruce is a regular gloss urethane finish that adds shine and protects your hardwood floor from nicks and scratches. It is easy to apply, with a shine that lasts and revives older floors and is a great alternative to re-sanding and re-coating.
Is it cheaper to refinish hardwood or replace?
Generally speaking, it is almost always less expensive to refinish your hardwood floors than to replace them. That's because replacing them involves paying for additional wood, the installation itself, as well as labor costs for tearing up and hauling away the existing hardwood.
When can wood floors not be refinished?
Antique Floors Besides, a properly maintained wood floor can go 20 or 30 years or more before needing to be refinished, says Lupresto. And it can be sanded and refinished "easily six or seven times" over its lifetime, he says.
Can hardwood floors be refinished to a different color?
When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.
Can you change color of hardwood floors without sanding?
Luckily, you have options other than leaving the floor as it is or replacing it. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
How do you get scratches out of Bruce hardwood floors?
0:291:45How to Fix Scratches in Prefinished Wood Floors : Woodwork & CarpentryYouTubeStart of suggested clipEnd of suggested clipAnd put a little bit of stain on there. And then I'm going to go to the scratched area. And justMoreAnd put a little bit of stain on there. And then I'm going to go to the scratched area. And just apply it to the floor. And then I'm going to kind of blend it in to the other floor.
Is Bruce a good hardwood floor?
Bruce is the fast-food chain of wood flooring: competent but none too exciting. Much of its solid hardwood offerings are devoted to good old domestic oak, and options with hand-scraped or distressed finishes tend to be limited.
Are there different grades of Bruce hardwood flooring?
Curious about hardwood grades and your flooring options? Bruce® has you covered. Our hardwood flooring offers three grades, including Select, Natural, and Rustic. Each type of flooring comes with its own select features like knots, colors, and grain variations.
Can you sand Bruce engineered hardwood floors?
0:084:55Refinishing Engineered Hardwood Flooring - Can It Be Sanded ...YouTubeStart of suggested clipEnd of suggested clipThe flooring is done any way it needs to be ripped up and thrown away.MoreThe flooring is done any way it needs to be ripped up and thrown away.
How thick do hardwood floors need to be to refinish?
Since most hardwood planks are manufactured with tongue and groove to interlock, it is necessary to leave at least 1/8 of an inch of wood at the top of the board, above the tongue and groove, for a complete refinish. It may be possible to refinish the floors if the boards are thinner than 1/8 of an inch.
How do I know if I can sand my floors?
Look for exposed nail heads near the edges of the boards as an indication that the floor already has been sanded too many times to sustain another refinish. Excavate carefully around one of the nails with a chisel to see if it's driven into the tongue of the board underneath the one that's showing through.
Can you refinish wood floors without moving all furniture?
Because it's impossible to refinish a floor with furniture in the rooms, it is necessary to move all furniture items from the areas to be completed.
Can hardwood floors be restained?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
What to do if Bruce hardwood floor is damaged?from ehow.com
If you have an area of the floor that has been seriously damaged, such as a deep gouge, the company has replacement planks.
Who makes Bruce hardwood flooring?from ehow.com
Bruce hardwood flooring, manufactured by Armstrong World Industries, Inc., is a hand-scraped hardwood plank floor. These floors come in a variety of finishes, all of which, according to the company, are durable and easy to clean.
How many gals of Bruce Fresh Finish?from ehow.com
Pour Bruce Fresh Finish into a 5-gallon bucket. Bruce Fresh Finish is a urethane dressing designed to restore Bruce hardwood floors that have been scratched or worn down by high traffic.
What was the finish of choice in the 70's?from houzz.com
polyurethane was the finish of choice in the 70’s. Old oil based yellow polyurethane. That wax has utterly contaminated and ruined in all respects. Pay a Pro to refinish an inconspicuous spot that still was wax contaminated. Sand and refinish. Look at it for a while, to see if any adherence problems rear their head.
Can Armstrong restore Bruce hardwood floors?from ehow.com
Armstrong sells many different cleaning products, which they recommend using on their floors for routine cleaning and maintenance, including several items that you can use for restoration purposes. With the proper materials and application method, you can restore a Bruce hardwood floor to its original state. Advertisement.
Can you sand a Bruce touch up kit?from ehow.com
Sand the dried filler down flush with the floor's surface. The Bruce Touch-Up Kit comes with a buffing pad. Use this pad and not sandpaper, which could scratch your floor.
Can prefinished hardwood be sanded?from rippnfinish.com
However, pre-finished hardwoods are a real solid hardwood. Therefore, they can be sanded! This is good news because most of the industry is install ing pre-finished hardwoods nowadays. If you are a consumer looking to purchase hard surface flooring, please consider putting down raw site-finished hardwoods.
What to do if Bruce hardwood floor is damaged?
If you have an area of the floor that has been seriously damaged, such as a deep gouge, the company has replacement planks.
What does restored hardwood floors do?
Restored hardwood floors can rejuvenate the decor and add value to your home.
How many gals of Bruce Fresh Finish?
Pour Bruce Fresh Finish into a 5-gallon bucket. Bruce Fresh Finish is a urethane dressing designed to restore Bruce hardwood floors that have been scratched or worn down by high traffic.
Can you sand a Bruce touch up kit?
Sand the dried filler down flush with the floor's surface. The Bruce Touch-Up Kit comes with a buffing pad. Use this pad and not sandpaper, which could scratch your floor.
Can Armstrong restore Bruce hardwood floors?
Armstrong sells many different cleaning products, which they recommend using on their floors for routine cleaning and maintenance, including several items that you can use for restoration purposes. With the proper materials and application method, you can restore a Bruce hardwood floor to its original state. Advertisement.
What is prefinished hardwood?
Prefinished hardwood is stained and finished at the factory under carefully controlled conditions, which provides a more consistent appearance and superior durability. Prefinished floors allow you to enjoy your new floor much sooner, without the dust, noise, and time spent waiting for finishes to be applied and cured.
How can I protect hardwood floors from scratches?
How can I protect my hardwood floor from scratches? We suggest using floor protectors on the feet of furniture and chairs, area rugs in high traffic zones and door mats by any exterior doorways to help prevent scratches on your hardwood flooring.
Why are jute backed rugs not recommended?
Jute-backed rugs are not recommended because jute is very abrasive and will scratch the surface of hardwood floors.
What is the difference between engineered hardwood and solid hardwood?
What is the difference between solid hardwood and engineered hardwood? A solid hardwood board is milled from one piece of wood and is typically 3/4" thick (although some come in 5/16" thickness). These products can only be installed on or above ground.
Why do you need a humidifier for hardwood floors?
During dry seasons, a humidifier is recommended to prevent excessive shrinkage in hardwood floors due to low humidity levels. During wet seasons, proper humidity levels can be maintained by use of an air conditioner or dehumidifier.
How to find the model number of a floor?
Make sure to take your sales receipt as your proof of purchase. From your receipt, the flooring store should be able to identify the name and model number of your floor.
Why does my wood floor turn dark?
The most probable cause is sunlight exposure, which can darken or lighten the exposed area. Wood reacts to ambient light and ages over time. Some degree of color change will naturally occur. We recommend occasionally shifting furniture and area rugs to prevent noticeable shading in the floor.
Can manufactured hardwood floors be refinished?
Can You Refinish Engineered Hardwood Flooring? Refinishing can restore your floor's appearance and make it look new. Still, the refinishing process is only suitable for some engineered hardwood floors. Refinishing is often followed after sanding your engineered hardwood floors.
Can prefinished hardwood floors be sanded and restained?
Like all solid-wood flooring, it can be sanded and refinished multiple times. To refinish an older floor, there must be at least ⅛ inch left between the top of the boards and the tongue.
How much does it cost to refinish original hardwood floors?
According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor.
What is the difference between refinishing and resurfacing wood floors?
You can undertake to refinish yourself — but the professional treatment is sure to leave you most satisfied. Resurfacing your floor involves more than just putting a layer of polish on top. It may require removing old floorboards, grinding down uneven boards, and reinforcing wood planks with new nails.
How much does it cost to install 1000 square feet of hardwood floors?
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
Is it possible to match hardwood flooring?
Although a professional can recommend a flooring replacement that will closely match your current floors, for a perfect match, it's best to strip your current hardwood floors and refinish both, or stain the new boards to exactly match the existing floors.
Can you put polyurethane over prefinished hardwood flooring?
A: Yes, a polyurethane-finished hardwood can be recoated if you take the proper steps to prep the finish. First, lightly sand with No. 2 steel wool or a dull 120- to 150-grit abrasive screen using a heavy floor buffer.
Is 2 1/4 solid oak good?
You will always be able to find it if needed - the unfinished oak doesn't get discontinued like other flooring.
Can you refinish prefinished floors?
The prefinished floors can be refinished to the color you want by sanding off the finish. The finish on these floors is very strong, so refinishing may cost a little more than for a site finished floor. It will need to be sanded down to remove the finish and the bevels on the side.
Is Bruce flooring prefinished?
Yes, these are prefinished red oak. Not Bruce floors but Baroque brand. The lighter color on the walls made all the difference! A neighnor stopped by (who was friends with the former homeowner) and said, “Oh my gosh! I never noticed how beautiful these floors are!”
How to flatten out prefinished hardwood floors?
In starting, the finisher works the floor on a 45 degree angle. This is also an effective method of flattening out the area as prefinished hardwoods do have some vertical height differences from one board to the next. In this case one pass is made with the drum sander then he runs back over the same area again and repeats through the entire room. The next sets of clips shows the aggressiveness of this first step with the 36 grit paper.
How many grit paper for Bruce prefinished floor?
We decided it was probably a standard Bruce prefinished strip floor that did not have any newer aluminum oxide type finishes, so the decision was made to start with a 36 grit paper on the drum sander.
What grit to use for sanding Norton Bluefire?
Here the guys have been accustomed to starting with a 36 grit while using a better quality sanding paper in the Norton Bluefire that works well to remove more material.
Why is my hardwood bevel smaller?
Let’s explain that. With imperfections in the vertical height of the hardwood, more hardwood gets removed with higher boards; the bevel becomes smaller than you will find with other areas.
What is the best angle to sand hardwood floors?
For any hardwood floor that requires removing a lot of deeper surface damage or bevels, a 45 degree direction is the preferred method in the first sanding sequence. The purpose of the angled sanding is two fold; removing more material and flattening the top surface of the floor.
When did beveled hardwood floors start to be installed?
Now that millions of prefinished beveled hardwood floors have been installed in homes across the USA, most notablysince the early to mid 90’s, many homeowners aren’t sure what to do. Should we keep the bevels or sand them flat?
Where are Uptown floors made?
Uptown Floors is a national online retailer of high quality prefinished hardwood floors. Our hardwoods are manufactured, finished and shipped from SE Ohio.
