Can a Parker hydraulic pump be repaired?
We specialize in Parker pump repair and rebuilds. If you need a free estimate for any Parker pump, get in touch with us today to find out how much it will cost for repairs. We provide fast, reliable hydraulic pump repair service on all Parker models.
Can you repair or rebuild my pump?
We have repaired pumps, rebuilt pumps, and remanufactured pumps for customers all over the world, and we are proud of our track record. It doesn’t matter where you are, what kind of pump you have, or what brand of pump you have; we can work with it, including the ones listed below.
Is your hydraulic pump in re-usable condition?
In order to receive full core credit, the housing, port block, and control need to be in re-usable condition. If you are looking for reliable service and consultation for your hydraulic pump, look no further than the expert team at Wooster Hydrostatics.
Can You ship your hydraulic pump to US?
As a leader in the field of hydraulic repair, we understand the importance of pump technology to your operations, no matter where you are in the world. You can ship your unit to us from anywhere in the United States or worldwide and you can be assured that we’ll fix it right, fix it fast and fix it at a good price.
Can hydraulic pumps be repaired?
In the hydraulics industry, a wide variety of products (such as pumps, motors and valves) can be repaired as long as the component dimensions, tolerances and clearances are within the prescribed limit.
How much does it cost to fix a hydraulic pump?
The Best in Auto Repair The average cost for ABS hydraulic pump replacement is between $1,179 and $1,221. Labor costs are estimated between $162 and $205 while parts are priced at $1,017.
How do you rebuild a hydro pump?
0:1619:22Hydro Pump rebuild - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know dry the machine that's there and then you got to pull the pulley off the bottom and takeMoreYou know dry the machine that's there and then you got to pull the pulley off the bottom and take bolt out here take the bolt out there.
Can you rebuild a hydraulic motor?
It's Less Expensive to Rebuild Hydraulic Equipment While repairs may initially be cheaper, it's only a matter of time before the equipment fails and repairs are once again needed. In the long run, rebuilds usually end up being cheaper than repairs and are certainly less expensive than purchasing new replacement parts.
What causes a hydraulic pump to fail?
Hydraulic Fluid Contamination Fluid contamination is the leading cause of pump failure and usually happens when particulates circulate through the system via a breather valve or cylinder rod, or as a result of repairs, welding slag, sealant, or refilling.
When Should a hydraulic pump be replaced?
The most common reason for hydraulic pump failure is fluid contamination....These repairs include:Increased noise: All mechanical actuators make noise during operation, but hydraulic systems should not produce loud banging or knocking sounds. ... High temperatures: Hydraulic systems should never exceed 82 degrees Celsius.More items...•
Who makes hydro gear pumps?
Hydro-Gear is a joint venture company between Sauer-Danfoss in Ames, Iowa and Agri-Fab, which is located in Sullivan, IL. Hydro-Gear is now the world's most prominent designer in hydrostatic transmissions and has been for the past two decades.
How does a zero turn hydraulic system work?
Zero-turn mowers have separate hydraulic pumps driving the left and right tires, and each side is controlled separately. One tire can be turning forward, while the other is turning in reverse; thus, the mower can pivot around its own center. This feature allows amazing versatility in trimming while mowing.
How do you replace the exmark hydraulic pump?
1:1412:48How To Remove A Hydraulic Pump From An Exmark Lazer Z - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlright first things first we're going to remove the negative cable from the battery. Then we'reMoreAlright first things first we're going to remove the negative cable from the battery. Then we're going to remove the belt from the pumps right there's the suspect pump the left pump remove the belt.
How do you repair a hydraulic cylinder?
0:0011:22How to Repair a Hydraulic Cylinder - YouTubeYouTubeStart of suggested clipEnd of suggested clipLast week we showed you what's inside a hydraulic cylinder today we're going to show you how toMoreLast week we showed you what's inside a hydraulic cylinder today we're going to show you how to repair one with root of fnh farm supply in Rogersville missouri.
Can hydraulic pumps be used as hydraulic motors justify?
However, many hydraulic pumps cannot be used as hydraulic motors because they cannot be backdriven.
How do you replace a hydraulic motor?
0:312:02How to Hydraulic Motor Replacement Lowrider Hydraulics - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you will look on the front of the motor you have two bolts. One right here one right here. ItMoreIf you will look on the front of the motor you have two bolts. One right here one right here. It goes all the way through the motor and connects to the block. Now once you take out those two screws.
How much does it cost to fix a hydraulic brake system?
The average brake pad replacement costs around $150 per axle, but these costs can rise to around $300 per axle depending on your vehicle's brake pad materials.
How much does it cost to fix hydraulic brakes?
How Much Does It Cost To Repair Bike BrakesType of RepairTypical FeeHydraulic Disc Brake Installation (Single)$40-60Mechanical Disc Brake Installation (Single)$30-40Brake Line Installation$40-60Disc Brake Pads Installation$30-406 more rows
How long do hydro pumps last on zero turn mowers?
1,500 - 2,000 hoursExmark uses a hydraulic pump to wheel motor drive design. Prior to 2009 these systems would last on average 1,000 hours. This design has changed drastically in 2009 when they combined these two units into one, eliminating hydraulic lines. These components have meeting their life expectancy of 1,500 - 2,000 hours.
What happens when a hydraulic pump runs out?
Once the warranty of the equipment runs out, it is often (but not always) left to the operators to carry out work on the machinery as and when it is needed.
Why is a hydraulic pump considered a dynamic product?
A hydraulic pump is defined as a dynamic product. This is because it has a continuous function. In any hydraulic system, the pumps need to run at all times. They might not always be in load condition, and sometimes might run at idle speed. This means that natural wear and tear is more common in its components than with other hydraulic products.
What is the end result of a rebuild?
The end result is to always make sure that the highest quality rebuilds are carried out, with the least possible amount of downtime, so that there is little to no effect on productivity and no need for loss of equipment, or plant shut down, which can ultimately result in loss of income.
Can you repair a pump?
Pumps, motors, valves, controls, and other constituent parts can be repaired as long as their dimensions, tolerances, and clearances are all within the right, prescribed limit. However, sometimes it makes more economic sense to carry out a full rebuild.
Can a hydraulic pump be rebuilt?
A rebuilt hydraulic pump, can function to as near original condition as possible if the work is carried out by professionals who are experienced and trained in this kind of work. In the first instance, the manufacturer of the pump should give an indication as to whether it is advisable to repair or rebuild a product and they should also state which ...
Is it worth rebuilding a hydraulic pump?
In the case of hydraulic pumps, a rebuild is often worthwhile and can be undertaken with the right brand new components or parts. Often, a hydraulic pump can be given a ‘second life’ in this way and go on to give many more years of solid service. A rebuild is often worth considering, instead of completely replacing a hydraulic pump with a new one.
Do hydraulic pumps need rebuilds?
Hydraulic pumps require precise rebuilds. In years gone by it was typical to find repairs or refurbishments being carried out rather than full rebuilds. Often this process would involve gluing, welding, or fusing two or more components in order to make them fully operational again.
Sauer Sundstrand
Don’t see your brand? That’s OK, because we have only listed the brands here that we work on the most. We work on just about any brand or type of pump, so don’t hesitate to get your free quote today.
Premium Service Options
For units that we have repair stock on hand, we can offer our Same Day Service program. If you request one of these units or your unit to be repaired is received by 10:30 AM we can have it ready to ship by 5:00 PM that same day.
Field Service & Consultation
No matter where you are, or what industry you are in, we can provide you with on-site repair and consultation services. We can send our expert technicians to you to ensure that your hydraulic pumps are working at peak performance. Our team has worked at various locations, including:
Hydraulic Pump Inventory
Check out our current inventory of new hydraulic pumps and remanufactured hydraulic pumps to see which models can be purchased and shipped out to you today.
Core Exchange Program
Our used core supply allows us to offer rebuilt, tested units and ship them quickly. In order to keep cores in stock, we offer a Core Exchange Program. We will build you a remanufactured unit and ship it to you. After you swap out the core, you send it to us.
Hydraulic Pump Repair Experts
If you are looking for reliable service and consultation for your hydraulic pump, look no further than the expert team at Wooster Hydrostatics. Call us today at 800-800-6971 to learn more about the Wooster Way and how we can help you keep your equipment running at peak performance.
Hydraulics requires precise, quality repair
The repair-rebuild industry for fluid power products has changed over the years. Centuries earlier, “repairing” broken parts of a complete unit was typical — whether the repaired unit perform the same original function or not, as long as it could be reused, repair was common.
Taking ownership of hydraulic components and repairs
Often hydraulic service typically becomes the responsibility of the OEM. However, as soon as the warranty of the equipment or machinery expires, the OEMs too, may not be able to service the machinery. Therefore, it now becomes the responsibility of the end users to maintain and up keep the equipment and machinery.
Different components require different care
A repairing function is not just cleaning, flushing, regrinding, and re-machining the parts and reassembling them to a full unit. There is more to it. Hydraulic products can be divided into three categories — dynamic, intermittent-dynamic, and static.
Defining aftermarket
The word “aftermarket” comes out of the market potential for a given line of products, after the original was sold or marketed the first time.
What is a rebuild?
While the exact definition of a rebuild can vary from shop to shop, a rebuild typically is a piece of equipment that has been used previously and reconditioned for further use. Expert rebuilders can not only restore a piece of equipment to OEM specifications, they can often exceed the quality of a brand-new machine.
What is the process of rebuilding equipment?
When equipment is rebuilt, it goes through a rigorous process that includes the replacement of seals and bearings, evaluating individual parts for their remaining life expectancy, replacing parts that are irreparably damaged, and restoring parts that can be refurbished.
Why are rebuilds so popular?
One of the first reasons that rebuilds are increasing in popularity is, of course, the lower cost. A rebuild typically costs about half of the price of a new piece of equipment, and this includes components like hydraulic motors and pumps.
Is it cheaper to rebuild or replace?
In the long run, rebuilds usually end up being cheaper than repairs and are certainly less expensive than purchasing new replacement parts.
Do you need to replace hubs in a rebuild?
In most rebuilds, only a limited number of parts need replacement, and those typically don’t include the largest parts, such as the hub. This alone will significantly reduce the energy involved for manufacturing. Not all of the remaining parts will need reconditioning, either.
Is rebuilding hydraulics environmentally friendly?
Rebuilds are More Environmentally Friendly. An additional consideration when choosing whether to repair, replace, or rebuild hydraulic equipment is the environmental impact of your decision. Rebuilding hydraulic equipment is clearly the most environmentally friendly option. Consider, for example, a hydraulic motor.
Parker Hannifin Pumps We Can Repair
If you don’t see your model number listed below, don’t hesitate to call or contact us. We service just about every model of pump that is available from Parker Hannifin and other manufacturers.
On-Site Parker Hannifin Hydraulic Pump Repair Field Service & Consultation
When you are on the job and under a deadline and equipment fails, you need fast, reliable repair. We can send in our field technicians to get your Parker pump back up and running as soon as possible. Our reliable, experienced team can perform diagnostic services and minor repairs for equipment and machinery used in many industries.
Fast, Accurate Parker Hannifin Hydraulic Pump Repair
If repairs cannot be made on-site to your Parker pump, you can ship it to our facility. If you’re close enough, you can drop it off. We know how important it is to get your hydraulic systems back up and running. So you can trust us to get your pump repaired and back to you as fast as possible, and working properly.
About Parker Hannifin Hydraulic Pump Division
Parker Hannifin HPD produces a wide array of hydraulic components and systems for a variety of industries. Their commitment to research and development and the integration of leading-edge technology allows the company to continually upgrade and add to its product line.
dgeesaman OPE Member
I have a Ferris IS3100z. It started to show metal shavings in the oil last summer, so I picked up rebuild kits for the hydro motors and pumps. Hopefully there won't be too many more parts to replace than that. Now it's time for me to pull it all apart and see what's left of the internals. I just know that keeping things clean is paramount.
Marshy WFO Cutting
I have some manuals that might help you. I believer they are service manuals for Parker. I'll let you know tomorrow.
dgeesaman OPE Member
My hydro tank is in good shape, but it can get pretty hot. I noticed that the newer models have a cooler in the circuit. On that note, does anyone know the proper oil level for these? The label on mine is gone so I keep it 3/4 full.
Marshy WFO Cutting
You might want to check for a rebuild video on youtube. It always helps to see it in a video first.
dgeesaman OPE Member
So I pulled both hydro motors (mildly annoying with the double-wishbone suspension parts) and found that both bearings are very lightly worn and the shaft has polish marks but no wear. So I need to decide whether or not to pull and replace those bearings.
Marshy WFO Cutting
So I pulled both hydro motors (mildly annoying with the double-wishbone suspension parts) and found that both bearings are very lightly worn and the shaft has polish marks but no wear. So I need to decide whether or not to pull and replace those bearings.
dgeesaman OPE Member
The hydro motor is a Parker. Per the Parker rebuild manual, the Viton is used in applications with "flame retardant fluids".
Precision Hydraulic Pump Repairsand Rebuilds
Hydraulic Components and Rebuilding Them
- Once a hydraulic pump is sourced and in use, it is the responsibility of the original equipment manufacturer to offer repair, rebuild or service options. Once the warranty of the equipment runs out, it is often (but not always) left to the operators to carry out work on the machinery as and when it is needed. It is then that machine operators and owners will want to look for alternate,co…
Rebuilding Or repairing?
- A hydraulic pump is defined as a dynamic product. This is because it has a continuous function. In any hydraulic system, the pumps need to run at all times. They might not always be in load condition, and sometimes might run at idle speed. This means that natural wear and tear is more common in itscomponents than with other hydraulic products. Therefore, hydraulic pumps can o…
Hydraulic Pump Rebuilding
- Pumps, motors, valves, controls, and other constituent parts can be repaired as long astheir dimensions, tolerances, and clearances are all within the right, prescribed limit. However, sometimes it makes more economic sense to carry out a full rebuild. A rebuild of a hydraulic pump willinvolve the failed product being dismantled. The reasons for th...