Do you need a locksmith to lock a filing cabinet?
Our number one request in small lock solutions is for filing cabinet locks. There are a few possible situations, and a locksmith can help you with all of them. When you need to lock a filing cabinet, you might: just need a filing cabinet key, want to replace a missing lock, or are looking to add a lock to the filing cabinet.
Do you need an extra key for your file cabinet?
Having an extra key or two for your file cabinet can take a large interruption to the workday and turn it into a small inconvenience. Instead of having to call a locksmith the next time, you'll just need to retrieve the extra key.
Can a locksmith make a key without the original key?
Some locks have specific features that deter using a lock to make a key, and it is nearly impossible to have a key made without having access to the original key. In some instances, it is much more affordable and expedient to have a locksmith replace your locks, rather than attempting to have a new key made from a lock.
What kind of file does a locksmith use to make keys?
To a locksmith, the file is just important as the key blank in this process, because it makes it far easier for a locksmith to make a key from a lock. Typically, a locksmith will choose from (or use both) a 6 inch Swiss #4 cut round file or a pippin file.
Can you get keys made for filing cabinets?
A trained file cabinet locksmith can create a working key by hand. We can also provide various file cabinet locks and desk locks that may be missing or broken. Sometimes these locks have not been used in a long time, do not operate correctly, or are just missing altogether. Not to worry!
How do you rekey a file cabinet lock?
0:411:50how to cabinet lock help swap desk Rekeytraining pro tip lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd to put it back in it's really easy just slide it back in do the same thing to use your hook pickMoreAnd to put it back in it's really easy just slide it back in do the same thing to use your hook pick two to get it back. In. Make sure you have it in there correctly. And and you'd be all done.
What do I do if I lost my file cabinet key?
You can also go to the store where you purchased the file cabinet and ask about the information. Make sure that you write all the information on a notepad to prevent it from missing. You will need to give this information to the locksmith who will provide you with a replacement key.
Can a locksmith replace a filing cabinet lock?
If you've simply lost the key and need access to the cabinet, it's not always necessary to replace the lock. Copy the numbers off the front of the lock and take them to a local locksmith, along with a photo of the lock. Most locksmiths will be able to make a replacement key that will operate the cylinder.
How do you change a lock on a metal filing cabinet?
0:091:11How to Remove & Install File Cabinet, Desk or Cubicle Lock CoresYouTubeStart of suggested clipEnd of suggested clipThen you will remove the core remove a key from the old lock core and insert the core removal keyMoreThen you will remove the core remove a key from the old lock core and insert the core removal key into the new lock core. Finally insert the new lock core into the lock housing.
How do you change the lock on a Steelcase file cabinet?
0:071:13Lock Core Removal & Install for Steelcase FR or XF File CabinetYouTubeStart of suggested clipEnd of suggested clipOnce completely inserted into the core. This key will remove the lock core from the cabinets. NextMoreOnce completely inserted into the core. This key will remove the lock core from the cabinets. Next simply insert the key into the new desired core and insert that core into the cabinet.
How do you open a locked office drawer?
6:077:41(013) Desk drawer wafer lock picked open 3 ways - YouTubeYouTubeStart of suggested clipEnd of suggested clipThough she goes open tuck it all the way around this time. Click and she's locked again the otherMoreThough she goes open tuck it all the way around this time. Click and she's locked again the other way. So it's a little bit stiff though the vise I'm gripping it so tight.
How do you unlock a door without a key in 5 seconds?
4:3210:0210 Ways To Open A Door Without A Key - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the allen wrench in the lower edge of the keyhole with slight. Pressure turn the lock as youMorePlace the allen wrench in the lower edge of the keyhole with slight. Pressure turn the lock as you would with a key pressure needs to remain stable. And then place the paperclip into the lock.
How do you unlock a cabinet without a key?
0:252:11How To Unlock Cabinet Lock Without Key??? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere is a bunch of pins. You have to just click all pin one by one. And simultaneously you have toMoreThere is a bunch of pins. You have to just click all pin one by one. And simultaneously you have to twist this knob to anti-clockwise then you can see that easily you can unlock this.
Why do you need a lock replacement for a filing cabinet?
File cabinet lock replacement is extremely important for the security and wellbeing of your private documents. Whether your filing cabinet is in a home or an office, the locks have to be reliable. So you need working locks that only certain people have keys to.
How to bypass a file cabinet lock?
Several bypass methods may work on your file cabinet lock, such as an actuator bypass where you insert a small thin piece of metal into the lock. Lift the pins, push the tool through to the back of the lock. While pushing in, push down and depress the actuator that controls the latch.
What to do if your cabinet lock is not working?
Uninstall the new cabinet lock if it is not working, and call a locksmith. 2. Removal Keys. File cabinet lock replacement may require special tools, such as a removal key (aka control key, change key, or pull key). These are keys that act in conjunction with your file cabinet key to allow the removal of the lock core.
Why does my file cabinet lock break?
A file cabinet lock will often break in one of two ways. The first is the lock cylinder will not work with the proper key. The second is a problem with the greater lock assembly . In either case, you might be able to temporarily get your broken file cabinet lock into a temporary working position.
What is a cam in a file cabinet?
The cam, tailpiece, or latch of a file cabinet lock is on the opposite end as the keyway. It is what catches on the interior lip of the cabinet to prevent the drawer from opening. It will also interface with the lock assembly that keeps the lower drawers locked. There are hooked tailpieces, latches, and short or long cams.
Why are standard locks more reliable?
Standard locks may be more reliable due to their physical components, but that physicality keys to be copied covertly. Physical locks also need to be physically changed to invalidate existing keys. Consider these differences when you are going through the file cabinet lock replacement process.
Can you use electronic locks on a filing cabinet?
Electronic Cabinet Locks. You may be using electronic locks for your filing cabinet, or wish to make this upgrade during the filing cabinet lock replacement process. It may surprise you to know that file cabinet locks are available with almost every electronic lock variation.
Why does a locksmith not always have access to the key code?
This process does not always work because a locksmith will not always have access to the key code that they need , especially in the absence of the original key.
How to make a key from a lock?
1. Cut the Key to Code. Cutting the key to code might be the easiest way for a locksmith to make a key from a lock. However, the fact that it is relatively easy does not mean that it’s a feasible solution for every lock type. A key code is a set of characters that is used to make a key for a specific lock.
Why do locksmiths disassemble a lock?
Locksmiths will usually disassemble the entire lock cylinder to try and reverse engineer the bitting for the key from the alignment and height of the pins within the lock cylinder. Disassembling the lock is a much harder process for locksmiths to carry out as compared to impressioning the key.
What is the difference between impressioning a lock and cutting a key?
In comparison to cutting a key to code, impressioning a lock is much more direct. In short, impressioning a lock allows a locksmith to make a key from a lock without having to disassemble the entire lock cylinder or rely on decoding the lock. This is often the go-to process for most locksmiths because of how efficient and expedient it can be. Although impressioning might be an efficient process for locksmiths, it is not easy to learn or execute. It requires a lot of practice and fine tuning, similar to practicing lock picking.
What is the difference between steel and aluminum key blanks?
Aluminum key blanks are prone to wear and crack easily under pressure, whereas steel blanks are extremely tough and durable which makes them harder to file down. Also, steel blanks are not exactly easy to come by. Ideally, a brass key blank should be used when a locksmith wants to make a key from a lock.
What is a key blank?
The key blank is probably the most important tool in this process, and choosing the right one is a major determining factor in whether you successfully impression the lock or not. Locksmiths usually have an array of key blanks to choose from. These include steel blanks, aluminum blanks, and brass blanks.
What size file do locksmiths use?
Typically, a locksmith will choose from (or use both) a 6 inch Swiss #4 cut round file or a pippin file. Swiss pattern files connote files that are used to make precision cuts, which is the ideal file for the process of making a key from a lock.
Why do you need to have extra keys for file cabinets?
It's important to have additional copies of your file cabinet keys in a safe place just in case they are lost again, break or bend. Have a professional locksmith make you extra keys and either give them to another trusted person in your business or keep them in a safe you have access to. Having an extra key or two for your file cabinet can take ...
What happens if you can't find the key to a file cabinet?
pcruz. Keys, Keys & Locks. When you can't find the file cabinet key, it could cause a huge interruption to your workday. You need a file and you cannot get to it without the key. Most filing cabinets are designed with safety features to keep anybody from bypassing the lock.
Can you pry open a file cabinet?
You never want to pry open the file cabinet unless you're ready to replace it after you do so. Once you pry into the cabinet, you will void the warranty and it will be very difficult, if not impossible, to fix the damage. It's better to call a Chicago locksmith and let a professional get you into your file cabinet.
Can you replace a lost file cabinet key?
It doesn't matter if you have a lateral or vertical file cabinet, replacing a lost file cabinet key isn' t difficult. You will often just need the right help from the cabinet manufacturer, but this can take time. You may be waiting for weeks to receive a new key and that may be too long.
Can you call a locksmith to retrieve a key?
Instead of having to call a locksmith the next time, you'll just need to retrieve the extra key. Then, you can call the locksmith to have another copy made at your convenience. Dealing with a lost or broken file cabinet key isn't an easy situation. It's annoying and can screw up the entire workday.
Can a locksmith replace a file cabinet key?
Even if the locksmith doesn't have the right key template to make a replacement, they may be able to make ...
File Cabinet Lock Installation
If you are looking to get strong file cabinet locks installed in your office or home, our certified commercial locksmiths can assist you. Wondering if we work with your particular cabinet brand? Rest assured we do. We cover all the different varieties of filing cabinet locks on the market today.
Types of Filing Cabinet Locks We Service
We service all types of filing cabinet locks. Even if your filing cabinet did not come with a lock preinstalled on it, our locksmiths can help you find and install the lock that best suits your filing cabinet security needs.
Our Filing Cabinet Locksmith Process
Once our locksmith assists you in selecting the file cabinet lock that best matches your particular needs, he will follow the next five steps to change your lock for you:
What You Need
To have a file cabinet key replacement, there are specific items you need to have first. These items are very easy to acquire, so you don’t have to worry. You can find some of them inside your house. If you don’t have them, you can purchase them at the nearest store in your area.
What to Do
Take note of the information on your file cabinet, including its serial number, model number, brand name, and the style of the file cabinet.
Conclusion
Do you enjoy our tutorial on how to replace a lost file cabinet key? It is easy to create replacement keys for filing cabinet as long as you have a licensed and trusted locksmith do it for you. This will prevent you from damaging your file cabinet and save your money from buying a new one.
1. Cutting New Keys According to the Code
Cutting new keys using the codes is one of the easiest methods to repair locks. Key codes are letters and numbers that show the characteristics of a lock. The codes are entered into the software to process the inputs or manually do it to find out the lock’s specifications.
2. Impressioning a Lock
One of the methods to make a new key is to impression a lock. It is a straightforward process since there is no need to figure out the codes or disassemble the lock body.
3. Disassembling the Lock
If a locksmith cannot get the lock’s code or he failed to make an impression out of it, his last option is to disassemble the lock. Compared to the two methods, this one is more difficult since it involves reverse engineering of the key, alignment, and the position of the pins inside the lock cylinder.
