How much does it cost to get a bathtub reglazed?
You should expect to pay about $1,000 for the entire bathroom tile reglazing job. The per square foot cost of per tile glazing ranges from $16.95 to $95.20. For a bathtub, the reglazing cost is around $400. This figure would cover the entire process, including prepping, sanding, stripping, smoothing, and finish.
Should I replace my bathtub or reglaze it?
When to Replace Your Tub
- Your Tub’s Getting Old. Most bathtubs last about 25 years. ...
- It Constantly Needs Repairs. If your bathtub constantly needs repairs, you should look into buying a new one. ...
- Short on Time. The reglazing process might take a few visits. ...
- Major Leaks. As soon as a bathtub starts leaking, you should start looking for a replacement. ...
- Mold and Mildew. ...
What are some pros and cons of bathtub reglazing?
The benefits (Pros) of bathtub reglazing or refinishing
- Fresh new look. Reglazing a tub restores some of the beauty that has been lost over time due to wear and tear or damage from exposure to water.
- Eliminates and prevents mold growth. Mold is not just gross, it can also be dangerous. ...
- Less expensive than replacing the tub. ...
- Protect against wear and tear. ...
- It’s a chance to change the color of your tub. ...
How much does it cost to reglaze your bathtub?
Tub reglazing cost by material
- Fiberglass. Reglazing can cover chips and cracks, but it's more labor-intensive if you have a fiberglass tub. ...
- Porcelain. It costs approximately $475 to reglaze a porcelain tub, on average. ...
- Cast iron. ...
- Miracle method. ...
- Perma-glaze. ...
Is it worth it to Reglaze a bathtub?
Bathtub refinishing is worth the money if your tub is in good working condition. The reglazing process can remove surface imperfections, like scratches, shallow cracks, and stains. But if your tub is old, leaking, or full of mold, reglazing is just a waste of money. You'll have to buy a new tub soon anyway.
How long does a bathtub reglazing last?
10-15 yearsHow long does a refinish last? The short answer is that a professional reglaze will last 10-15 years. The long answer is that there are other factors in prolonging the glaze and finish of your bathtub. Refinishing helps protect the integrity of your bathtub.
Can all bathtubs be reglazed?
Professional Bathtub Refinishing Process Cast-iron, steel, and fiberglass tubs and shower stalls can all be re-coated to match the original finish or in an entirely new color.
Is it cheaper to Reglaze a tub or replace it?
Advantages: The cost of tub reglazing is lower than the cost of a full tub replacement or the cost of a new liner. The average cost is about $452, according to Angie's List. A refinished bathtub can last for about 20 years if you care for it properly, which can be longer than the lifespan of a brand-new bathtub.
What is the difference between reglazing and refinishing a tub?
So the main difference between the "bathtub refinishing” and “bathtub reglazing” is that the former refers to the entire restoration project and the latter refers to the commercial coating applied at the end of the process.
How many times can you Reglaze a bathtub?
Such repeated refinishing applications cannot be repeated indefinitely. Refinishing is regarded as a temporary fix in the best of circumstances, and two refinishing coatings are the most you can reasonably expect to apply. Don't be surprised if the second refinishing has an even shorter life than the first coating.
Does Reglazing a tub change the color?
Changing the Color of the Tub You can change the color of your bathroom simply by reglazing all the fixtures and the wall tiles. It's cheap, quick, and safe! And best of all, no item is removed from its place. If you also do a full regrouting and recaulking job, your bathroom will look like brand new!
How often should bathtub be replaced?
If your bathtub is around 20 years old, it may have seen better days. Or, if your bathtub is even around 35 or 40 years old, but you refinished it about 20 years ago, you may have the same issues – it just can't seem to get clean no matter what! If you have an aging bathtub, it may be time for a replacement.
How long do you have to wait to take a shower after Reglazing your tub?
You should let the tub surface to cure for 24 to 48 hours. After the surface has dried, it is 100% safe to use the bathroom fixture.
How do you make an old bathtub look new?
0:031:03How can I make my old tub look new? - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know if your tub is damaged all the needs repair it can be made to look new again by having aMoreYou know if your tub is damaged all the needs repair it can be made to look new again by having a tub liner installed or having it refinished. But if you need a brand new tub.
How long does it take to reglaze a tub?
One of the drawbacks of reglazing a tub is the fact that it does take time. If things don’t go right, it can take up to four days to complete this task.
Why is glaze important in a bathtub?
That glaze helps protect the bathtub materials underneath from scratching, and more importantly, it keeps the material from absorbing water and from suffering from water-related damage.
How long after glazing can you use a bubble bath?
Wait for at least 48 hours after glazing and at least 24 hours after caulking, to use the tub. At this point, you can remove the tape and tarps, return everything to the bathroom, remove the ventilation system, and you are good to go. Now it’s time for a bubble bath!
How long does glaze dry on shower?
Once you have allowed the newly applied glaze to dry for about 24 hours , you can then replace the fixtures, such as the overflow valve, the spout, and the showerhead, as well as the curtain rail. Once you have replaced the fixtures, move onto the next step.
Do you have to cover everything with plastic before glazing?
Alright, so before you get to the actual glazing process, if you have not already covered absolutely everything with tape and plastic sheets, now is the time to do so.
Do you have to clean the bathtub before painting?
Now that the bathroom as a whole is ready to go, before you can start putting new material onto your tub, you must first thoroughly clean the bathtub, and yes, this involves removing the old glaze and paint, particularly in the areas where it is coming off already.
Do you need to open windows before reglazing a bathtub?
Therefore, before you begin reglazing your bathtub, you absolutely need to open all possible windows and if possible, put a good air fan into the room. You absolutely need great ventilation when doing this. If you are unable to open windows, then some good air fans for ventilation become just that much more important.
Other FAQs About Reglazing A Bathtub
Here are some other frequently asked questions about reglazing a bathtub that will help you with your decision!
Final thoughts On Reglazing A Bathtub
Reglazing your bathtub is a fun and relatively simple DIY project, especially considering the alternative of fully replacing the bathtub and all of the hassles that entail.
How To Decide Whether To Reglaze Your Bathtub Or Not (Pros & Cons List!)
DIY With Christine is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
What Are Acrylic Tubs?
So, you want to use refinishing as an inexpensive tub restoration service, but don’t know if your tub can be reglazed. The good news is that it is definitely possible. In fact, you can refinish any acrylic fixture, including acrylic sinks. In case you are wondering, acrylic tubs are made out of sheets of acrylic.
Any Problems With Reglazing Acrylic Tubs?
Refinishing an acrylic tub is just like refinishing any other fixture. There are no special requirements or dangers. So why would replace the tub or sink when you can simply do a refinishing job? You just need an established company that does tub reglazing in New York. Why? Because refinishing is not something you should attempt to do yourself.
How many bathroom professionals have died from reglazing?
Since 2000, more than 14 bathroom professionals have died while performing various reglazing procedures. Reglazing seems like a very dangerous procedure, we agree. However, this may not be the case if one follows all the adequate safety best practices in the industry.
What is the compound used in tub resurfacing?
In some cases, stripping products are used during the resurfacing process. Many of these substances contain a compound known as methylene chloride.
How to minimize the risks of refinishing?
Some of the things the worker can do to minimize the risks of the refinishing procedure is installing a local exhaust ventilation system, minimizing the spraying of substances, using good spill and leak control, using long-handled tools, and even leaving the bathroom after applying the substance that contains methylene chloride.
Is reglazing a tub dangerous?
The fumes that emanate from the tub during the reglazing procedure are dangerous. Methylene chloride can cause serious health problems and can even stop breathing in large enough concentrations.
Can you do a tub repair yourself?
We understand you want to do a tub repair for rust stains and damage. However, don’t do it yourself! It is dangerous because even DIY reglazing kits contain substances with methylene chloride. If you do want to go ahead and do the refinishing procedure yourself, keep in mind that ventilation is extremely important.
Why do you resurface a bathtub?
Essentially, it is resurfacing a bathtub to repair cracks, chips, or any other superficial damage. However, the problem comes in when resurfacing for the second time in a row. The underlying layer will not play along with holding a new layer at the top as well, so you have to ensure that the tub is sanded even further.
How long does it take to install a tub liner?
It’s a fast solution, but at times does not seal as well to the original tub. Another downside is that it takes 8 weeks to fabricate the liner, and the overhead costs can be overwhelming in the long run.
Can you reglaze a bathtub?
Yes, you can reglaze (in other words re-surface or refinished) a bathtub that has been reglazed before. If the surface has noticeable wear even when the bathtub hasn’t frequently been used, it could be that the original refinish job was not done currently or did not dry completely soon after the service. If this is the case, you could be facing ...
How long does a bathtub last?
No bathtub will last forever. Refinishing may get you three or four extra years, and a liner may serve fine for five to seven additional years, but eventually, your tub will need to be replaced. In fact, it may be better to bite the bullet and replace it when it first begins to show its age, rather than going through the hassle and expense of performing refinishing and installing liners, which are of limited duration, anyway.
How much does it cost to replace a bathtub?
HomeAdvisor, a trade organization that serves to match homeowners with qualified local contractors, reports that the average national cost of replacing a bathtub is $3,087, although costs of $5,000 or more are quite common.
What is the best way to repair a cracked bathtub?
Bathtub refinishing —also known as resurfacing or reglazing —is a valid option when porcelain, enamel, or fiberglass tubs become chipped, badly scratched, or cracked. The process involves first repairing any cracks or holes with a polyester putty or Bondo, then applying a spray or roll-on coating consisting of epoxies, urethanes, polymers, ...
What is a bathtub liner?
A bathtub liner is essentially exactly what it sounds like—a thin, solid shell of acrylic or PVC plastic that slips inside the old bathtub to make it seem like new. You get brand new, smooth surfaces that fit inside the old tub like a glove.
Can you install bathtub liners yourself?
While there are stock bathtub liners available at home improvement centers, which you theoretically can install yourself, these are not very successful or graceful installations. They often do not fit perfectly, and they may flex and crack under your weight.
Can you refinish a bathtub again?
Bathtub refinishing is essentially painting the tub, although is it painting that is done with a highly specialized coating. Your bathtub can, of course, be painted again. A limitation to refinishing a second time is that the underlying coat of refinishing material is not the best surface for adhering a new coat of finish. To be successful, the bathtub surfaces will need to be even more carefully prepared by thorough cleaning and etching, and any flaking, dings or nicks will need to be fixed before application of the second coat. If the first refinishing job did not last as long as you wanted, then you should use a different company for the second refinishing, and make sure they warranty the work adequately.
What is a bathtub made of?
A huge percentage of the bathtubs and shower stalls that are manufactured nowadays are made out of plastic, consisting of a variety of polymer materials among which we can mention something called ABS ( acrylonitrile-butadiene-styrene ), acrylic resins, or glass-fiber reinforced polyester. Many people tend to believe that those tubs ...
What type of glue is used for refinishing?
Many reputable refinishers like America Refinishing Pros use two types: a primer with epoxy properties and a special type of glue. A s its name states, the main purpose of the bonding agents to increase the level of adhesion of the topcoat.
Can you refinish a shower stall?
June 20, 2020. May 13, 2021. As a matter of fact, yes. Most acrylic or fiberglass bathtubs or shower stalls can indeed be refinished with a great level of success and fantastic outcome if done by a reputable and experienced bathtub refinishing company. A huge percentage of the bathtubs and shower stalls that are manufactured nowadays are made out ...
Do reglazers use exhaust systems?
All the professional bathtub reglazers use a powerful exhaust system during the process to vent out all the fumes, which means that even though there will be some smell, especially for the first few hours, by just keeping the bathroom door close the odor is in most part contained.
Is a fiberglass tub shiny?
These plastic, acrylic, or fiberglass tubs are normally not too shiny when they are brand new, so since the professional-grade topcoats are very glossy and have a lot of body, after the bathtub refinishing or shower refinishing is done they usually look way more beautiful when compared to their original appearance.
How many times can a tub be reglazed?
I have a cast iron tub that is original to my 1940 house. It has been reglazed at least once maybe 15 years or so ago. There are now chips in the finish and it looks perpetually dirty no matter how much we clean. We are planning a bathroom remodel and trying to decide what to do with the tub. It is in a standard tub alcove.
Comments (5)
Replace the tub. I'm surprised you got 15 years out of it. Most don't get but 2-3.
