Can you put cetol over varnish
Varnish
Varnish is a transparent, hard, protective finish or film that is primarily used in wood finishing but also for other materials. Varnish is traditionally a combination of a drying oil, a resin, and a thinner or solvent. Varnish finishes are usually glossy but may be designed to produce satin or semi-gloss …
What is cetol marine paint used for?
Cetol Marine can be applied anywhere that you would use varnish, but is particularly suitable for areas that endure hard use—grabrails, swim platforms and ladders, or the cockpit sole, where it produces a surprisingly durable and non-slip finish. It comes in three shades; Cetol Marine, Cetol Marine Light, and Cetol Marine Teak.
What is the difference between varnish and cetol?
Cetol is much easier to maintain than varnish; a light rub-down at the beginning of the season and a refresher coat of the Marine Gloss should do the trick. If you’ve let things go for a couple of seasons, sand back gently, paying attention to any grey spots, apply a coat of Teak and then a coat of Gloss, and you should be ready to go.
Can cetol be used over existing finishes?
Sikkens makes a number of products that are called Cetol. Some are water bourne others are oil based. There are stains as well as paints and top coats. Some can be put over existing finishes that are in good shape, others cannot. You would have to be more specific about the Cetol product and how it will be used.
Should I use varnish or cetol on my Boat?
Cetol is much easier to maintain than varnish; a light rub-down at the beginning of the season and a refresher coat of the Marine Gloss should do the trick. If you’ve let things go for a couple of seasons, sand back gently, paying attention to any grey spots, apply a coat of Teak and then a coat of Gloss,...
How to apply cetol finish?
What is cetol marine?
What is the alternative to varnish?
Is cetol better than varnish?
Can you use Cetol Marine varnish?
Do you need to sand between coats of cetol?
See 1 more
Can you use cetol over stain?
It is recommended that Cetol Marine be applied directly to bare wood, or to a previously applied Cetol Marine finish that's in good condition, and not to stain or wood finishes other than Cetol Marine.
Is cetol better than varnish?
Cetol is much easier to maintain than varnish; a light rub-down at the beginning of the season and a refresher coat of the Marine Gloss should do the trick.
Is sikkens cetol a varnish?
Sikkens Cetol TFF is a colourless, non-yellowing varnish ideal for timber and parquetry floors providing an outstanding impact and abrasion resistant finish.
Is cetol a polyurethane?
Cetol® BL is a waterborne, urethane-fortified transparent satin finish, which enhances the natural beauty of the wood grain, while providing a hard wearing and scratch resistant film to protect most interior wood surfaces.
What is the difference between cetol and varnish?
Cetol is easier to apply than varnish (put on 3-4 coats, no work in between coats) It's easier to remove than varnish. It lasts 2-3 years before you need to re-touch (varnish lasts 6-12 months)
Is cetol a sealer?
Sikkens ProLuxe Cetol Log & Siding is a wood stain and sealant that provides prestige, performance and perfection in every bucket.
Is sikkens cetol oil based?
Sikkens Proluxe Cetol SRD is a one coat, oil-based, transparent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs.
Is sikkens a polyurethane?
Protective varnish - CETOL BL - SIKKENS - polyurethane / acrylic resin-based / for wood.
What is cetol used for?
Cetol® Marine with Next Wave UV-absorbing technology, is a protective, translucent and breathable wood finish for use above the waterline on interior and exterior woods.
What is cetol wood finish?
PPG Proluxe SRD. Formerly known as Cetol SRD, PPG Proluxe SRD Wood Finish is a one-coat, transparent exterior wood stain and finish for siding, railings, and decks. The high-transparency transoxide pigments amplify the depth of color and clarity, while penetrating for long lasting protection.
Can you sand cetol?
Apply 3 coats of Cetol® Marine. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness. Recommended film thickness must be applied to ensure effective product performance.
Can you put cetol over teak oil?
Marine wood finishes like Cetol and TotalBoat Marine Wood Finish can be used over oiled woods such as teak, if the finish in good condition.
What is cetol used for?
Cetol® Marine with Next Wave UV-absorbing technology, is a protective, translucent and breathable wood finish for use above the waterline on interior and exterior woods.
What is the best way to finish teak?
As mentioned earlier, application of teak wood oils is the best finish for teak wood furniture. However, some teak wood oils are better than others. The best teak wood oil is the all-natural, non-toxic premium teak wood oil that does not contain petroleum distillates.
Is sikkens a polyurethane?
Protective varnish - CETOL BL - SIKKENS - polyurethane / acrylic resin-based / for wood.
Can cetol be applied over teak oil?
Marine wood finishes like Cetol and TotalBoat Marine Wood Finish can be used over oiled woods such as teak, if the finish in good condition.
Cetol vs Varnish. Which is better? | Sailboat Owners Forums
So I am refinishing the wood trim on the exterior of my H-34 and I am trying to decide between Sikkens Cetol and Varnish. The Cetol is easier to apply in that it does not have to be sanded between coats. I've never used varnish. I appreciate any thoughts from folks with experience in this area
Teak Oil vs Varnish vs Cetol | SailNet Community
The problem with teak oil is that it will turn darker and pick up dirt. Varnish looks best but it can turn into a career. Cetol natural - not the old type that turns orange over time - followed by Cetol gloss looks almost as good as varnish and is easy to keep looking good.
Is there an alternative to varnished wood? | YBW Forum
I have a vintage McGruer sloop with lots of exterior varnished wood, both original and recent solid mahogany and recent mahogany marine ply. Location West of Scotland, so damp a lot of the time. Varnish does not work. It peels off the solid wood and the ply, and where it comes off the ply the...
Who makes cetol marine?
Many of us sailors use a product called Cetol Marine, made by Sikkens, also referred to by them as Marine Light, Marine Satin and Marine Gloss. It is in the West Marine.com catalog if you would like to see it. Unfortunately I can answer his question, but there is such a product that he is referring to. Others are also correct that there are many products sold with the Cetol name, such as finish for long homes, etc.
What is Sikkens cetol?
Sikkens makes a number of products that are called Cetol. Some are water bourne others are oil based. There are stains as well as paints and top coats. Some can be put over existing finishes that are in good shape, others cannot. You would have to be more specific about the Cetol product and how it will be used. Proper application can be critical with these products, I'd contact the company first.
Can cetol be used over wood?
It's Cetol Marine. As I mentioned, it's an oil based product. Their instructions say that it should be used over raw wood, but as we know that's often just for them. That's why I was looking for expertise here.
Does Sikkens make cetol?
Sikkens doesn't make a product called Cetol Marine. They have clear exterior Cetol TGL, which is discontinued, Cetol Door and Window, Cetol SRD as well as SRD 250 and SRD RE. Cetol 1, Cetol 23, Cetol Dek. It doesn't make much difference unless the first coat was the log pre-treatment product or a base product. The thing with Sikkens clear oils is that they not only have to go on bare wood but that wood has to be sanded to remove mill finish, planer crush, airborne contaminants, etc. It has to be perfect. The application conditions have to be just right and you'd better be a good painter. It has been used on a few of my decks in the past but it hasn't stood up to northeast weather on those, and is a major pain to re-do. I don't think any of the Cetol products are recommended for marine use. Sikkens does make yacht paint. When you use a product professionally, you have to follow manufacturers application methods or the problems land back on you.Beat it to fit / Paint it to match
How to apply Cetol?
APPLICATION: When applying the first coat of Cetol, apply it at a time of day when dew, rain, or other condensation will not affect the cure or finish. The ambient air environment, Cetol product, and wood substrate must be between 50 and 90°F. Avoid applying in direct sunlight, if possible. Do not thin Sikkens Cetol, even on the first coat. Using a long-haired natural bristle-type brush, apply a liberal coat. Allow 24 hours to cure before applying the next coat. Do not sand between coats, as this product needs the full application thickness from each coat for its UV effectiveness. If absolutely necessary, scuff lightly with a Scotch-Brite™ pad, or lightly sand sags or drips away with 320-grit sandpaper; an extra coat of Cetol may be necessary after sanding. Apply all coats within 1-2 weeks. Use Interlux 216 for cleanup, before the Cetol has cured.
How long does it take to apply cetol?
Apply all coats within 1-2 weeks. Use Interlux 216 for cleanup, before the Cetol has cured. For the first year, it is recommended to build 3 coats of Cetol Marine, Marine Light, or Marine Natural Teak. If a gloss finish is desired, at least 2 coats of Cetol Marine, Marine Light, or Marine Natural Teak are required before applying 2-3 coats ...
How long does it take for Sikkens cetol to cure?
Do not thin Sikkens Cetol, even on the first coat. Using a long-haired natural bristle-type brush, apply a liberal coat. Allow 24 hours to cure before applying the next coat.
How to clean old boat finish?
Wash the old finish thoroughly with boat soap, and allow it to dry completely. Lightly sand the old finish (with the grain) using 220-grit or 320-grit sandpaper. Remove all sanding residue with a vacuum, and apply a maintenance coat of Cetol.
What is cetol marine light?
Cetol Marine Light. Cetol Marine Natural Teak. Cetol Marine Gloss. All varieties create a translucent finish, except Cetol Marine Gloss. The Marine Gloss product is only designed to go over one of the other Cetol finishes, it is not designed as a stand-alone product.
Can Sikkens cetol be used on bare wood?
PREPARATION: Sikkens Cetol is designed to go directly onto bare wood. Remove any previous coating or varnishes before applying. If the wood has any staining present, it should be cleaned first with a quality teak cleaner, as directed. In this case, they recommend Interlux Premium Teak Restorer.
Can you use Acetone on cetol?
No solvent wipes should be necessary. Acetone or Interlux 216 can be used if absolutely needed, and only on bare wood—DO NOT use these solvents on Cetol coatings.
How to apply cetol finish?
As with any finish, the path to a pleasing long-lasting finish begins with thorough preparation. If this is the first time you are using Cetol, any old finishes must be removed completely, then the surface must be sanded with 180-220 grit paper in the direction of the grain. New wood just needs a light sanding; vacuum the surface and wipe down with Interlux 216 to remove any oil and dirt from the surface. I apply three coats, allowing 24 hours between each. Unlike varnish there is no need to sand between coats. If you want a varnish-like finish then you can gently rub the surface down with an 3M abrasive pad and wipe down with 216 before applying the final coat of Marine Gloss.
What is cetol marine?
Cetol Marine can be applied anywhere that you would use varnish, but is particularly suitable for areas that endure hard use—grabrails, swim platforms and ladders, or the cockpit sole, where it produces a surprisingly durable and non-slip finish. It comes in three shades; Cetol Marine, Cetol Marine Light, and Cetol Marine Teak.
What is the alternative to varnish?
Cetol —An Alternative to Varnish. Not so long ago, boat owners would recoil in horror at the mention of Cetol. It was a product used by amateurs who didn’t know any better and the result was an orange coating that dulled quickly and did nothing to enhance the grain of any wood. Author:
Is cetol better than varnish?
Cetol is much easier to maintain than varnish ; a light rub-down at the beginning of the season and a refresher coat of the Marine Gloss should do the trick. If you’ve let things go for a couple of seasons, sand back gently, paying attention to any grey spots, apply a coat of Teak and then a coat of Gloss, and you should be ready to go.
Can you use Cetol Marine varnish?
Those days are long gone. The Sikkens range of marine coatings has improved beyond belief and if you apply it according to the instructions, it is often difficult, to all but the professional eye, to tell it apart from traditional varnish. Cetol Marine can be applied anywhere that you would use varnish, but is particularly suitable for areas ...
Do you need to sand between coats of cetol?
Unlike varnish there is no need to sand between coats. If you want a varnish-like finish then you can gently rub the surface down with an 3M abrasive pad and wipe down with 216 before applying the final coat of Marine Gloss. Cetol is much easier to maintain than varnish; a light rub-down at the beginning of the season and a refresher coat ...
