How to Run Fan Only on ecobee You can run the fan for an extended period without interruptions by the cooling and heating cycles. The property is one of the new changes to the ecobee software and is called ‘Fan Holds.’ The feature is available on the latest ecobee firmware version 4.6.25.
Why is my ecobee’s fan always running?
There are a variety of options in your ecobee’s settings that can cause your fan to run constantly. If those settings aren’t to blame, then there is a wiring problem somewhere between your thermostat and your HVAC fan.
Does my ecobee thermostat support multi-speed fan and FCU systems?
ecobee3 and earlier model ecobee thermostats (SMART, SMARTSi, EMS, EMSSi) do not currently support multi-speed fan, FCU, or multi-speed PTAC systems Dual-transformer systems (thermostats with both RC and RH wires) and installations requiring the ecobee Power Extender Kit are not compatible
What is heat dispersion in an ecobee fan?
The heat dispersion configuration in an Ecobee allows you to decide how long you want your fan to run after the HVAC system has turned off. The standard-setting is pegged at 30 seconds after your HVAC system is off, but you can configure it all the way up to 900 seconds.
What systems and setups are not compatible with ecobee?
Incompatible systems and setups include: ecobee3 and earlier model ecobee thermostats (SMART, SMARTSi, EMS, EMSSi) do not currently support multi-speed fan, FCU, or multi-speed PTAC systems Dual-transformer systems (thermostats with both RC and RH wires) and installations requiring the ecobee Power Extender Kit are not compatible
Can I run the fan only on thermostat?
You can run your system's fan independently of heating or cooling. So your system doesn't need to be actively heating or cooling to run the fan. However, you can only run the fan when your thermostat is set to a temperature mode (like Cool mode, for example).
Is it OK to run AC fan all the time?
Leaving the fan on eases the strain on the HVAC system. Constant motion means fewer stops and starts, which can extend the lifespan of your unit. Constant fan use keeps the air in your home circulating through your air filters and UV sterilizers if you have them.
How long should I run the fan on ecobee?
The recommended minimum fan runtime every hour is approximately 5-20 minutes. The significance of the minimum fan runtime is that it also supports the cooling and heating cycles. A fan circulates air in the room.
Is it OK to run HVAC fan continuously in winter?
Furnace fans are designed to run all the time, so there's no need to worry about it failing prematurely. Much of a furnace fan's wear and tear comes from the starts and stops of the motor; keeping it running can eliminate this type of stress.
Is it better to keep AC fan on AUTO or on?
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.
Is it cheaper to run fans or central air?
Fans are cheaper to run than air conditioners, and can be used in place of air conditioners or along with them to save money. If you have a ceiling fan, run it at the same time as the AC. It pushes cooler air down and over the bodies of the people in the room.
How do I make my ecobee fan Auto?
Head into your Quick Settings menu and choose the “Fan” option. You should be able to toggle between auto and on in this menu. Simply switch back to auto, and you are good to go!
Does running HVAC fan reduce humidity?
The system's fan brings air into the indoor unit, where it passes over the cool evaporator coil. Heat and humidity are removed as the conditioned air is pushed back into your home by the same fan.
Is nest better than ecobee?
Ecobee or Nest? For the money, Ecobee has the better value. You get the integrated Alexa speaker and air quality sensor, as well as one included remote sensor with your purchase. In terms of features, accessories and overall options, Ecobee blows Nest away.
Should thermostat fan be on or AUTO in winter?
"auto" is the best setting for your furnace fan in the winter. It will aid in saving energy and money while also working to keep your home at an optimal temperature. However, for summer, "on" is the best setting for your furnace fan.
Is it cheaper to run furnace fan all the time?
Running your furnace fan all the time is a good way to waste energy and money. If you set your fan to auto, your system will last longer, your energy bills will be lower, and you won't go through filters as much. Use other methods to deal with air purity and save yourself the costs of leaving the fan on.
When should I use the fan on my thermostat?
The fan setting pulls air through the filter continuously, offering an effective way to clean the air if you're suffering from poor indoor air quality. If you're dusting, vacuuming, sweeping, or completing projects that release odors and particles into the air, consider turning on the fan setting while you work.
Can I leave my fan on 24 7?
Yes, for nearly all household electric fans you can run them 24 hours a day, 7 days a week. Electric fans are one of the most reliable (and affordable) electric appliances around.
How long can a fan run continuously?
You can leave a fan running continuously for eight hours, on average, without worrying about unexpected ceiling damage or fires in your home. That does not mean, however, that you want to push your fan to its limits.
How long can AC run continuously?
An air conditioner is a device that is designed to maintain a set room temperature all day long. There is no such thing as the appliance will melt, or get damaged if run continuously for 24 hours. In fact, you can run your AC constantly for an entire week.
Does running AC fan increase humidity?
Leaving your AC fan set to ON allows the moisture in your home to accumulate and reach mold-growing levels of humidity. To ensure that you and your family stay cool and healthy this summer, keep your AC thermostat fan setting to AUTO.
How long does an Ecobee fan run?
This is set to Auto by default, meaning that after each heating/cooling call, the ecobee will run the fan for 30 to 45 seconds.
How to adjust fan settings on Ecobee?
To adjust this setting, go to MAIN MENU > COMFORT SETTINGS > select your desired Comfort Setting
How does Ecobee thermostat work?
Set to ecobee thermostat: By choosing this option, your ecobee will energize the fan directly during heating cycles. This will cause the fan to immediately turn on when a heating cycle is initiated, and continue to run until the heating cycle ends.
When does a fan run in auto mode?
In Auto mode, the fan will only run during calls for heating or cooling for the duration of this Comfort Setting . The fan will also run to meet the Fan Minimum On Time requirement (discussed above).
What happens if the fan is set to 0?
If set to 0 the fan will turn off as soon as a call for heating or cooling has concluded.
Does the thermostat show fan on until?
NOTE: If there was a Hold on the thermostat prior to the Fan Hold being placed, the thermostat may not display the expected "Fan on until" text and will instead show the currently held temperature. However, the fan will still be set to ON, and the Quick Changes menu will show the fan running under the "Equipment running now" section.
Can an Ecobee thermostat control a fan?
ecobee thermostats can control your fan in a variety of ways to maximize your comfort. Below we explain the five methods available.
What firmware version does Ecobee need?
If you do not see the "I'm a pro" option, your ecobee likely needs a firmware update, as multi-speed fan support requires a firmware version of at least 4.6.3.X or higher.
What to do if you can't see the screen on Ecobee?
If you do not see this screen: please click here to troubleshoot, or contact ecobee support to request a firmware upgrade.
How long does it take to update an Ecobee thermostat?
Once you have connected the ecobee to Wi-Fi and ecobee.com, a firmware update should begin downloading. This process can take upwards to ten minutes. Once the upgrade has downloaded, the thermostat will momentarily reboot.
Is the Ecobee 4 compatible with the FCU?
With the release of firmware versions 4.6.3 and up, the ecobee Smart Thermostat with voice control, ecobee3 lite, and ecobee4 thermostats are now compatible with many low-voltage multi-speed fan systems, including FCU (Fan Coil Unit) and PTAC (Packaged Terminal Air Conditioner) systems.
What wires are needed for a fan coil?
Fan-coil units that require the G1, G2, and G3 wires to be energized simultaneously for high-speed fan
Can you factory reset an Ecobee?
Once you've verified the firmware version is up to date , you can factory reset your ecobee by doing the following:
Can a power extender be used for a 2 pipe FCU?
A Power Extender Kit cannot be used for 2-pipe FCU systems, as the PEK terminal will need to be utilized for the pipe sensor
Why does my Ecobee fan run?
Odds are, your fan’s problem are caused by your settings. There are a variety of options in your ecobee’s settings that can cause your fan to run constantly. If those settings aren’t to blame, then there is a wiring problem somewhere between your thermostat and your HVAC fan.
What is Ecobee thermostat?
Ecobee is a smart home thermostat that can fully integrate with existing smart home systems as well as your current HVAC setup. These thermostats boast a 23% reduction in heating and cooling costs. They also offer models that come with sensors included in the box that can help keep your home at a more consistent temperature.
Why is my HVAC fan running?
Problems with Your HVAC System. Your fan usually responds to commands from your thermostat to tell it when it needs to run and when it needs to shut down . If your fan is constantly running, it might be a sign that there is a wiring problem somewhere along the way.
Why does my HVAC fan run for a few seconds?
This is because even after your system turns off, there is still residual heat that can be pushed out into your home. Using this residual heat saves you money in the long run by making the most of your HVAC dollar.
What does Ecobee do?
The Ecobee thermostat can use information like when you are home, your schedule, and your temperature preferences to create a profile that keeps our home at an ideal temperature without needing input.
Why is my fan stuck on the thermostat?
If there is a problem with this relay, your fan could get stuck in the “on” position constantly. There are also broken relay switches, faulty fan motors, and other wiring problems that could be the cause of your fan troubles.
When will Ecobee thermostats be available in 2021?
April 6, 2021. April 6, 2021 by Tristan Perry. Ecobee makes one of the best smart home thermostats on the market. It comes fully ready to work with both Alexa and HomeKit. It also comes with all the features you’d expect from a modern smart thermostat. Even with all these features, many users have been struggling to get their HVAC fans ...
How Ecobee Thermostats Stack Up Against the Competition
Right out of the gate, it’s important to be crystal clear about one fact:
Are Ecobee Thermostats Known to Be Faulty?
Ecobee thermostats have a reputation for being almost foolproof to use and for real reliability.
How to Troubleshoot Ecobee Issues Effectively
Let’s run through a couple of the troubleshooting steps you’ll want to take to figure out exactly what’s wrong “under the hood” of your Ecobee.
