Can You Lay wood floor over existing hardwood floors?
Starting from scratch with a brand-new subfloor is always an option, but sometimes it is just more convenient to install a hardwood floor over the existing floor. Can You Lay Wood Floor over Existing Hardwood Floors? An existing hardwood floor can make an excellent subfloor for a new wood floor.
Can I install hardwood over a floating floor?
If you’re dead set on keeping the original direction, a minimum 3/8 plywood sub floor should be installed over the older floor. Can I Install New Hardwood Over A Floating Floor? Sorry, the answer is no. The older floating floor has too much flex for another floating floor or an attached floor with nails or staples.
Can You nail down engineered hardwood flooring?
Although it is necessary to lay the new boards at a 90° angle to the existing direction of the old floor, you simply nail it down in a standard way. Having the extra depth of the existing hardwood floor actually makes it easier to do so. Any existing hardwood floor is an excellent subfloor for engineered wood.
Is an existing hardwood floor better than plywood?
As long as you prepare things properly, an existing hardwood floor is a better subfloor than plywood or other subfloor options. Proper planning is imperative if you want to avoid any problems that could occur during the installation process and after the floor is installed.
What to consider before installing new hardwood floors?
How to install hardwood floors in the same direction?
Why is it important to inspect the existing floor prior to installation?
What happens if you don't fix a squeaky floor?
Why does my hardwood floor squeak?
What is the most important step in the installation process of hardwood floors?
What happens if you replace hardwood floors?
See 2 more
Can you install a wood floor over an existing wood floor?
Yes, you can install over an existing wood floor, provided it meets some important conditions. First, make sure doing so won't create problems with height differences at areas such as transitions with other rooms and stairs.
What flooring can be installed over hardwood?
Laminate flooring can be installed directly over hardwood, often with no preparation necessary. If your laminate has a built-in underlayer, you may install it right on top of the hardwood.
Can you put new wood flooring over old?
Wood flooring can be installed over existing ceramic tile, terrazzo, or marble with proper underlayment or adhesives only on manufacturer's recommendation. G. Installing wood flooring over an existing wood floor. Caution: Do not sand any surfaces containing lead based finishes/paints or asbestos.
Can you put engineered hardwood on top of hardwood?
The installation process is one of the most obvious reasons to choose engineered over solid hardwood flooring. Engineered hardwood comes with an easier and more flexible installation process. While you must staple or nail solid hardwood to install it, you can staple, nail, float, or glue engineered hardwood.
Should I remove old hardwood before installing vinyl plank?
LVT planks have an incredibly realistic wood look, and vinyl flooring care and maintenance is a breeze. Here's something even better. If you've been graced with authentic hardwood flooring, it isn't even necessary for you to remove it before installing LVT!
How do you cover old hardwood floors?
If the wood floor is sturdy, you can cover it with tile, stone or even brick veneer. A layer of tile backer board helps minimize the natural movement of wood floors. Backer board installs with screws, similar to drywall.
Can you put new flooring over existing flooring?
If the current flooring is fixed to the subfloor and in good condition, you may be able to apply a new flooring over top. However, if the there are broken or worn parts of the current flooring, or if the subfloor itself needs some work, you will need to remove what's there and start from the bottom.
Can you lay vinyl plank over hardwood?
Many different types of vinyl flooring can easily be installed over hardwood, from floating vinyl planks over hardwood floors and other types of vinyl flooring over hardwood. The key is simply to select a product that doesn't need to be glued, stapled, or nailed to the hardwood subfloor.
Should I remove hardwood floors?
Although most problems can be fixed without removing and replacing the entire floor, not all hardwood flooring can be saved. Simply put, if your current floors are mostly just looking drab and dull, or if they have surface-level damage, you can probably save them.
Is it better to refinish or replace hardwood floors?
Wood Floor Condition The condition of the flooring is the most significant factor when choosing to refinish or replace. If the damage is mostly superficial, refinishing is usually the best choice. But if the damage is severe and includes rot or water damage, those planks will have to be replaced.
What is floating floor installation?
Floating floors are flooring installations in which the flooring material "floats" over the subfloor and underlayment. Due to its ease and simplicity, floating floor installation saves money and helps installation go a lot faster, making it a favorite method for DIYers.
What is a floating hardwood floor?
What is a floating hardwood floor installation? Floating hardwood floor installation is a fast and easy DIY project. No glue-down, stapling or nailing is required because individual boards attach to each other instead of to a subfloor, so the wood floor essentially “floats” over the subfloor.
Can vinyl plank flooring be installed over hardwood?
Many different types of vinyl flooring can easily be installed over hardwood, from floating vinyl planks over hardwood floors and other types of vinyl flooring over hardwood. The key is simply to select a product that doesn't need to be glued, stapled, or nailed to the hardwood subfloor.
Can I install floating floor over old hardwood?
Another advantage of floating floors is that they can be installed over an existing floor that you may want to save and uncover later (like an old wood floor that you don't want to refinish just yet, but don't want to put a bunch of holes in either).
Can you put vinyl flooring over wood floors?
Can I install vinyl flooring over wood, plywood, particleboard or chipboard? You can install vinyl over wood floors if you put a plywood subfloor on top of it. Do not install glue down or peel and stick products over particleboard, chipboard or any form of embossed floor.
Is it cheaper to refinish hardwood floors or replace with laminate?
It is cheaper to refinish than to replace hardwood floors. However, refinishing only provides monetary benefits in the short term, which will add up over time. Depending on the age and state of your floors, spending the extra money to replace them might be the better option in the long run.
Laying floating or solid timber floors over old timber floors
I put Silkwood myself on our floors. 68m squared in 3 bedrooms, hall and loungeroom. We had the house restumped first. The Silkwood I laid across the way the original floorboards were running.
Can I install hardwood flooring over an existing hardwood floor?
it's for a rental? just use no-glue vinyl! pull it up and replace for each new tenant! lol if you're doing the whole floor area, all rooms, etc. with no transitions, i wouldn't try to remove old floor, i'd just gently pull baseboards and go over it. but be sure to also check door heights with a piece of flooring to make sure there's room there to add 3/4" too! you may need to shorten a door or ...
How To Install Floating Hardwood Directly Over Existing Flooring
(Step 4). Continue until full length plank must be trimmed to fit at the end of the first row. (Step 5). Cut last plank to length with a miter saw making sure to calculate in the 1/4” gap.
How to Install Hardwood Floors Over Existing Hardwood Floors
Analyze the floor's level, using a 10-foot straight edge. Sweep the straight edge across the floor and mark any areas not level. Sand humps with a belt sander and fill any depressions with a troweled-on patching compound.
What to consider before installing new hardwood floors?
One other issue that needs to be cared for before the new floor is installed is to consider the transition from the new floor to other floors in the home. It doesn’t matter if you are transitioning from the new hardwood floor to an older hardwood floor in an adjacent room or to carpet or even linoleum, the change in height can be a problem and even a tripping hazard.
How to install hardwood floors in the same direction?
If you plan on installing the boards in the same direction as the old floor, a plywood underlayment will need to be installed between the two.
Why is it important to inspect the existing floor prior to installation?
It is important to inspect the existing floor prior to installation because imperfections in the existing floor will show up in the floating floor. If there are any high points, they can be sanded out in advance. Loose fasteners can be tightened or removed and replaced and any squeaks can be fixed by adding a few screws.
What happens if you don't fix a squeaky floor?
If you don’t take the time to fix the squeak or tighten up and/or replace any loose fasteners before installing the new floor, the problem will be transferred to the new floor. In fact, when a subfloor is squeaky in just a small area, it can make for a very large area of problems when the new floor is installed.
Why does my hardwood floor squeak?
If there are any loose fasteners or if the existing hardwood floor has a squeak, that is something that must be fixed before the new hardwood floor is attached. More than likely, you have lived with the squeaky floor for quite some time and have even grown accustomed to that particular part of the floor making noise when you walk on it.
What is the most important step in the installation process of hardwood floors?
Perhaps the most important step in the process is to thoroughly inspect the existing hardwood floor and weed out any problems that exist. One of the most common problems with the hardwood floor, ...
What happens if you replace hardwood floors?
This can include elevation changes, loose fasteners, large gaps between the boards, and even squeaky areas. It may take some time to inspect the old floor and make any changes, but it is going to be well worth the difference.
What is the best tool to remove a floor?
Removal would require cutting around the perimeter of each room up to the wall area. Today, a nifty tool called the toe kick saw makes removal a much easier task. For other types of installations, expect the floors to be installed with expansion in mind.
Can you remove a floating floor with nails?
Sorry, the answer is no. The older floating floor has too much flex for another floating floor or an attached floor with nails or staples. Besides floating systems are the easiest to remove, but some care should be used when removing from under door casings and the like.
Is newer adhesive stronger than old?
In years to come newer adhesives may be stronger than what is being used today. What may happen is the new actually pulling the older floor from what was thought to be a permanent bond . Easier solutions with installing over old glued floors would be floating floors.
Can you nail over an old floor?
By simply nailing over an older floor, don’t expect old squeaks to go way. If they were there before starting the job, make sure permanent fixes are put into use. Often older flooring loosens from the floor joists or the sub floor. Common decking screws or ring shank nails can be used to shore up some squeaks.
Is it better to remove old flooring or install new?
We get opposing views on this one, but most professionals feel more secure by complete removal and then installing a new floor. There can be too many unknowns in so far as the bond between the older floor and the underlying adhesive. In years to come newer adhesives may be stronger than what is being used today. What may happen is the new actually pulling the older floor from what was thought to be a permanent bond.
Is it dangerous to remove old floorboards?
Removing can become dangerous as there’s no room to work from once floorboards are taken up. It becomes a tightrope scenario, trying to balance from one area to another unless some temporary platforms are put into place.
Can you put parquet over vinyl?
Although parquet is no longer as popular as it once was, a few precautions should be considered specifically with those products that are installed using Polyvinyl Acetate (PVA) adhesives with vinyl or cork flooring requiring an additional underlayment. Additionally, any parquet flooring patterns installed over existing strip or plank flooring should also have a minimum 3/8” underlayment added.
How high will the new floor be if you add subfloor?
if you add subfloor, then the new height will be 1.5" higher! you almost certainly would need to do door work. flooring on old flooring with no new subfloor is what i thought you were asking us? my apologies if i misunderstood.
When was there no plywood?
Remember that 100 years ago there was no plywood and no OSB. Mostly they did dimensional lumber.
Can you use floating wood floors?
We've run into this situation a few times recently. If you really don't want to tear out the floor you have, the best thing you can do is use a floating wood floor like Kahrs that click together and doesn't attach to the existing floor.
Can you level a floor?
:thumbup:Yes, certainly can be done, leveling is an issue, that needs attention. The other is that all the old floors need to be completely free of infestations. Then it it will also save on the costs of any extractions and removals at this stage or at a later stage. Simple self-adhesive materials are available, which are worth a try for being inexpensive and do not need tutorials to install. Many of them may also are very thin to give paramedics a rest.
Can you install subfloors in a room?
The short answer is yes you can. You can install as many floors as you want to.#N#The problem is the transition to other rooms. This is what drives floor installations.#N#You can also put in any size of sub floor you want to. Again, the goal is to have a smooth transition to the other rooms.#N#If you do not have a smooth transition then people will be tripping over that and the Paramedics will know your address by heart.#N#So the goal is to make your floor the same height as the rest of the house.#N#You can use OSB.
Can ugly floors be used over existing floors?
So nice to know that these can go over most existing floors and hold up well. Thanks for sharing and I love your designing vibes:)
Can you DIY install hardwood floors?
While installing hardwood floors throughout a home… you live in… with your kids…DIY-style… is certainly no simple feat, advances in technology have made it so much more feasible for the average Joe (or Jane) to tackle.
Can you install click and lock LVT over ceramic tile?
Long before I knew that a hardwood product of this nature existed, I had actually installed click and lock LVT planks directly over the nasty, ceramic tiles in my kitchen.
Do you need to level out a subfloor before installing new flooring?
If there are any protruding or blatantly uneven pieces of tile or wood planks on your existing subfloor, you will need to level this out before you begin installing new flooring. There is one small piece of uneven subfloor that I do occasionally feel underfoot when I walk over it.
Can you put Shaw flooring over tile?
While I rarely ever collaborate with brands for sponsored posts, when Shaw Floors approached me with the details of their new product line, Floorté Hardwood Series ( a waterproof, engineered hardwood which can be installed directly over existing tile or solid wood subfloor), I knew the partnership would work seamlessly with my existing home improvement expertise and tutorials. You see..
Can you install vinyl tile over hardwood?
In fact, some flooring manufacturers now offer product lines, such as certain Luxury Vinyl Tile and Engineered Floating Hardwood Planks, specifically for installation over existing subfloors (think ceramic tile and/or solid wood) with no demo required!
Can you sand off old flooring?
If safe to do so (see caution above), sand off old finish and or high spots and prep to clean, dry, sound and flat. Repair, renail or replace loose flooring products as needed.
Can nail down be used on sheet vinyl?
E. Nail-down applications may be successful over existing sheet vinyl or vinyl tile if fastener penetration is not significantly diminished and the subfloor meets minimum requirements. Fasteners must penetrate a proper subfloor by at least 5/8".
Can particleboard be used as an underlayment?
Some manufacturers approve particleboard as an acceptable underlayment, as they do not warrant against subfloor movement. In such cases, follow manufacturer's recommendation. D. Other types of adhesives may require the use of a primer or vinyl blocker when installing over sheet vinyl or vinyl and cork tile flooring.
Can you put PVA over sheet vinyl?
B. Glue-down parquet applications that require the use of PVA adhesives are not recommended over existing sheet vinyl or vinyl and cork tile flooring unless an underlayment is put down first. Underlayment should be in accordance with adhesive and/or flooring manufacturer's recommendations.
Can wood flooring be installed over tile?
F. Wood flooring can be installed over existing ceramic tile, terrazzo, or marble with proper underlayment or adhesives only on manufacturer's recommendation.
Why not just refinish the hardwood floor?
You could refinish your solid hardwood floor instead of laying a laminate floor on top of it. But keep in mind that refinishing a floor can take a lot of time. All the furniture must be removed from the room. The wood needs to be sanded bare. Any structural or cosmetic repairs need to be made before staining and coating and more. If you do not want this trouble, you should install quality laminate flooring over your hardwood floor instead of having them refinished.
How to contact Plano flooring?
So, get in touch with our Plano flooring experts to help you find the right laminate option. Call us at (469) 666-4531, and we will be happy to assist!
Is laminate flooring popular in Plano?
There are various flooring options out there, but none has made as big an impact on the flooring market as laminate has. Over the last couple of years, laminate has seen remarkable popularity among homeowners in Plano, Texas — thanks to its cost-effectiveness, durability, visual appeal and ease of installation.
Do you need to level warped hardwood floors?
You will also need to level the warped part of your hardwood floor as any inconsistencies in the flooring surface could result in stress points for locking joints, creating problems down the line. Let’s remind you of one important thing: DO NOT tighten the laminate too much to the wall.
Can you put laminate flooring on top of hardwood?
If that is the case, you will need to do some basic preparations prior to installing the laminate flooring on top of your existing hardwood floor: pull any protruding nails or fasteners and sand down any floorboards that are bent or angled up. You will also need to level the warped part of your hardwood floor as any inconsistencies in the flooring surface could result in stress points for locking joints, creating problems down the line.
Can laminate flooring be refinished?
And of course, not all hardwood floors can be refinished. If your hardwood floor has underfloor damage, boards that wiggle and move around a lot, and sustained damage such as warping, chipping, ugly stains, ...
Is laminate flooring cheaper than hardwood?
Unlike hardwood floors, no special products are needed. Finally, laminate installation is relatively affordable. The materials used in the production of laminate flooring themselves are fairly inexpensive, and the installation costs are also much lower than restoring your old solid hardwood boards.
What to consider before installing new hardwood floors?
One other issue that needs to be cared for before the new floor is installed is to consider the transition from the new floor to other floors in the home. It doesn’t matter if you are transitioning from the new hardwood floor to an older hardwood floor in an adjacent room or to carpet or even linoleum, the change in height can be a problem and even a tripping hazard.
How to install hardwood floors in the same direction?
If you plan on installing the boards in the same direction as the old floor, a plywood underlayment will need to be installed between the two.
Why is it important to inspect the existing floor prior to installation?
It is important to inspect the existing floor prior to installation because imperfections in the existing floor will show up in the floating floor. If there are any high points, they can be sanded out in advance. Loose fasteners can be tightened or removed and replaced and any squeaks can be fixed by adding a few screws.
What happens if you don't fix a squeaky floor?
If you don’t take the time to fix the squeak or tighten up and/or replace any loose fasteners before installing the new floor, the problem will be transferred to the new floor. In fact, when a subfloor is squeaky in just a small area, it can make for a very large area of problems when the new floor is installed.
Why does my hardwood floor squeak?
If there are any loose fasteners or if the existing hardwood floor has a squeak, that is something that must be fixed before the new hardwood floor is attached. More than likely, you have lived with the squeaky floor for quite some time and have even grown accustomed to that particular part of the floor making noise when you walk on it.
What is the most important step in the installation process of hardwood floors?
Perhaps the most important step in the process is to thoroughly inspect the existing hardwood floor and weed out any problems that exist. One of the most common problems with the hardwood floor, ...
What happens if you replace hardwood floors?
This can include elevation changes, loose fasteners, large gaps between the boards, and even squeaky areas. It may take some time to inspect the old floor and make any changes, but it is going to be well worth the difference.
