Sizes 5/16", 3/8" and 1/2" using a pneumatic tool to remove the Hollo-Bolt:
- 1) Set the pneumatic hand tool to reverse mode (anti-clockwise rotation).
- 2) Place a suitable size wrench (depending on collar size) on the collar flats to hold in place.
- 3) Use the pneumatic hand tool to loosen the bolt.
What size tool to remove Hollo Bolt?
Can a bolt and loose collar be removed?
Can you put a Hollo Bolt in an existing hole?
Can a bolt be used for HSS?
What are Hollo bolts?
The Lindapter Hollo-Bolt is a patented method of securing to square, rectangular or circular hollow section steel, or to conventional steelwork where access is available from one side only.
Why are hollow bolts used?
A Hollo-Bolt eliminates the need to side-cut a slot for access to a nut. This way, the aesthetics of the job are preserved, and the job gets done a lot faster, with a stronger hold.
How does a hollow bolt work?
As the bolt head is tightened, the cone is pulled up the bolt thread, causing the legs of the sleeve to expand until the cone locks the sleeve against the inner wall of the hollow section. At full tightening torque, a clamping action is set up between the fixture and steel section to form a secure connection.
What are hollow bolts called?
Hollo-Bolt – an expansion bolt for Structural Hollow Sections (SHS/HSS) with “blind connections,” when you only have access to one side of the connection.
Where are hollow bolts used?
Hollo-Bolts are suitable for structural connections due to their capability to resist loading in both tension and shear. For example, the M20 Lindapter Hollo-Bolt has a safe working load of 35kN in tension and 40kN in shear.
What is a box bolt?
Box Bolt – is an expansion bolt for structural steel connections to hollow section steel or where there is a “blind connection,” where you only have access to one side of the connection.
How does an expansion bolt work?
0:001:00Expansion bolts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe expansion bolt carefully into the hole until it's flush with the surface of the wall tighten.MoreThe expansion bolt carefully into the hole until it's flush with the surface of the wall tighten. The bolt so that the shell expands. And fits tightly.
What does HSS stand for in bolts?
hollow structural sectionsConnecting to steel hollow structural sections (HSS) from a single side has troubled engineers for decades. However, there are now numerous types of fasteners and connection methods for this increasingly popular structural material, other than the norm of welding.
What is a box bolt?
Box Bolt – is an expansion bolt for structural steel connections to hollow section steel or where there is a “blind connection,” where you only have access to one side of the connection.
Lindapter Hollo Bolt Catalog - Unistrut Service Co.
Lindapter Hollo Bolt Catalog - Unistrut Service Co.
Hollo-Bolt - Lindapter
Save time and money. Clamping two steel sections together avoids time-consuming welding or conventional drilling and bolting.. Safer connections. Drilling and welding in the field is avoided, removing the need for hot work permits and encouraging safer site conditions. High strength. Lindapter clamps are manufactured from high strength materials to resist high load requirements and harsh ...
Standard Lindapter Hollo Bolt | JPL Direct
M10 Lindapter Hollo - Bolt (3 - 22mm Clamping Thickness) HB10-1 305112 - Each
Hollo Bolt Catalogue - Thomas Potter
Hollo Bolt Catalogue - Thomas Potter
Lindapter | Type HB Hollo-Bolt Hexagonal Head | Expansion Bolt
Save time and money. Clamping two steel sections together avoids time-consuming welding or conventional drilling and bolting.. Safer connections. Drilling and welding in the field is avoided, removing the need for hot work permits and encouraging safer site conditions. High strength. Lindapter clamps are manufactured from high strength materials to resist high load requirements and harsh ...
Hollo-Bolt
For fastening where access is available from one side only. Suitable for hollow sections or steelwork.
Hollo-Bolt Installation
Align pre-drilled fixture and section then insert the Hollo-Bolt (a). (Figure 1)
What tool is used to tighten a Hollo Bolt?
Power tools, such as an impact wrench, may be used to speed up the tightening of the Hollo-Bolt. However, when using power tools, always complete the tightening process with a torque wrench to ensure the correct torque is applied to the Hollo-Bolt.
Is Hollo Bolt a registered trademark?
Hollo-Bolt® and Lindapter® is a registered trademark of Lindapter International.
Hollo-Bolt
Steel, bright zinc plated plus JS 500 Steel, sheraplex Steel, hot dip galvanized Stainless Steel Grade 316
Product Description
Installation is quickly carried out by inserting into pre-drilled steel and tightening with a torque wrench. Independent approvals include ICC-ES seismic accreditation, the Los Angeles Research Report and CE Mark.
What size tool to remove Hollo Bolt?
Sizes 5/16", 3/8" and 1/2" using a pneumatic tool to remove the Hollo-Bolt:
Can a bolt and loose collar be removed?
5) The bolt and loose collar can now be removed.
Can you put a Hollo Bolt in an existing hole?
No, although a new Hollo-Bolt can be inserted in the existing hole.
Can a bolt be used for HSS?
No. It is designed as an expansion bolt for HSS or other steel sections where access is available from one side only.
