can i put a longer bar on my stihl chainsaw

What is the best bar length for a Stihl Chainsaw?

Stihl has a recommended bar length range for each of their chainsaw models to address these issues. The range is determined mainly by the saw size and power. The minimum bar length recommended by Stihl is 10” or 12” for small (35 cc and under) gasoline-powered, battery or electric chainsaws, and 16” for medium-sized and large gas saws.

Why do Chainsaws have different size bars?

The reason is that the general rule can applies well only to typical chainsaws, and cannot cover exceptional saw designs. An another reason is that there is some real variation in ”typical” saws too: between 75 cc and 90 cc, for example, Stihl recommends bars up to 8” longer than Husqvarna.

Should I Change my Chainsaw guide bar or chain?

Before you change your guide bar, you will also want to consider the other chainsaw components this might impact. If you increase (or decrease) the length of your bar, you will definitely need a new chain. This is pretty straight forward, if the bar gets longer, you’ll need a longer chain to wrap around it.

How many types of Stihl guide bars are there?

The article in a nutshell is that Stihl guide bars come in 3 different bar mounts and a total of 9 pitch-gauge combinations. To fit, a replacement bar for a Stihl chainsaw should have the same mount type and chain pitch as the saw; the bar and chain should further have matching pitch.

Can I replace my chainsaw bar with a longer one?

If you change the bar, you must also change the chain. The chain needs to fit precisely onto the bar in two ways. First, it must be exactly the right diameter to fit snugly around the bar and sprocket. Second, the drive links, on the inner ring of the chain, must fit exactly in between the guide slots on the new bar.

Can I put an Oregon bar on a Stihl chainsaw?

Chainsaw Bar & S55 Chain, Fits Various Stihl Models (105668) This Oregon 16" guide bar and chain combination features a S55 3/8" low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain.

What lengths do Stihl chainsaw bars come in?

STIHL guide bars range from 10" (found on our tree-trimming pole pruners) to an incredible 59" (used in extreme felling operations).

How big of a bar can you put on a Stihl MS 311?

16 in.Note: STIHL recommends use of fuel with no more than 10% Ethanol content....Decompression Valve.POWER SOURCEGasGUIDE BAR LENGTH (Recommended)16 in.OILOMATIC® CHAIN3/8" RS3CHAIN OIL CAPACITY11.8 oz.ENGINE POWER4.2 bhp3 more rows

What is the biggest bar you can put on a Stihl MS 180?

Stihl's electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.

Whats the biggest bar you can put on a Stihl 881?

41” guideWith its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful chainsaw in the STIHL lineup.

What is the longest bar for a Stihl chainsaw?

The longest bar created is the Stihl chainsaw which measures 72 inches.

What is the best Stihl chainsaw for cutting firewood?

For the best Stihl chainsaw for cutting firewood, we refer back to our recommendation of the Stihl MS 261 C-M. In addition to this saw being our top recommendation overall, its M-Tronic engine management system auto-adjusts the fuel mix to keep the saw running no matter what you're cutting (or where).

What Stihl chainsaw has a 36 inch bar?

Stihl STIHL-MS880-36 MS 880 Chainsaw - 36 Bar.

What size bar is a Stihl Farm Boss?

16 in.MS 271 FARM BOSS® 4.5 out of 5 stars....Side-Access Chain Tensioner.POWER SOURCEGasPOWERHEAD WEIGHT12.3 lbs.GUIDE BAR LENGTH (Recommended)16 in.OILOMATIC® CHAIN.325" RM3CHAIN OIL CAPACITY8.12 oz.3 more rows

What CC is a 311 Stihl chainsaw?

Specifications: Displacement: 59.0 cc (3.6 cu. in.) Engine Power: 3.1 kW (4.2 bhp)

What do the numbers mean on a Stihl chainsaw bar?

The final set of numbers show how many drive links are in the chainsaw chain that will run on that specific bar. This bar has “72” stamped, so it would need a 72 drive link chain. Drive link count can range anywhere from 28 to 210 depending on your bar size.

Can I use a different brand chain on my Stihl chainsaw?

Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw. Before buying a Stihl chain or another brand, you must be familiar with four measurements that describe a chain.

What Oregon bar fits a Stihl MS250?

The Oregon 180TXLBA074 SpeedCut chain saw bar is compatible with select Stihl chain saw models included 021, 025, 025C, MS230 and MS250.

What Oregon bar fits Stihl MS170?

Our records indicate that the Oregon 105668 is the correct part number for your Stihl MS170.

Can you use an Oregon chain on a Husqvarna chainsaw?

Oregon D72 AdvanceCut Chainsaw Chain for 20-Inch Bar -72 Drive Links – low-kickback chain fits Husqvarna, Stihl, Dolmar, Jonsered and more.

How big of a bar can a Stihl saw handle?

Saws designed to be used by professional arborists in trees, the MS 192 and MS 201 models, can take guide bars between 12 and 16 inches. Stihl's electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches.

What size bar does a Stihl arborist saw take?

The professional models vary greatly in size, from the MS 150 arborist saw, which is equipped with a 12-inch bar, to the massive MS 880, whose 121.6 cc engine can handle a 59-inch bar. In the middle of the range, models include the MS 261, which can take a bar between 16 and 20 inches; the MS 362, which can accommodate a bar up to 25 inches; the MS 441 and MS 461, which can accept a bar up to 32 inches; and the MS 660, which takes a bar up to 36 inches.

What is a chain saw guide bar?

A chain saw's guide bar determines the size of timber the saw can cut, and the size of a saw's engine determines, in large part, how long a bar the saw can handle.

What should a replacement bar for a Stihl chainsaw have?

To fit, a replacement bar for a Stihl chainsaw should have the same mount type and chain pitch as the saw; the bar and chain should further have matching pitch. We will next start with a short recap of chainsaw bar compatibility.

What is the minimum bar length for a Stihl chainsaw?

The minimum bar length recommended by Stihl is 10” or 12” for small (35 cc and under) gasoline-powered, battery or electric chainsaws, and 16” for medium-sized and large gas saws. I suspect this minimum is related to kick-back safety.

What size bar mounts does a Stihl chainsaw use?

At current, Stihl chainsaw and bars use three (3) different bar mounts: the small 3005, the medium 3003 and the large 3002. These are not interchangeable: if your saw has a 3003 mount, so must your bar.

How many pitches are there in a Stihl guide saw?

Stihl guide saws, bars and chains are designed for a total of 6 different chain pitches and 3 gauges. In the current Stihl lineup, these form 7 pitch-gauge combinations, and bars are available in 9 combinations. The combinations are mutually incompatible.

What to look for when looking for a replacement bar for a Stihl saw?

These matching principles apply to Stihl bars just as to all other brands: when searching for a compatible replacement bar for your Stihl, just look for bars with the same mount and pitch as your saw. Bar length, gauge, brand, kerf, construction, nose profile, etc., are important, but do not affect saw compatibility as such.

What is the most powerful Stihl saw?

The MS 250 ties with MS 251 as Stihl’s most powerful homeowner saw. Matching a bar to this popular Stihl model is a bit more challenging than usual, since the saw comes in two different pitches.

How long is a Stihl bar?

Finally, the Stihl gives 12” to 16” as the recommended bar length range for this model.

Can you Put a Long Bar on a Chain Saw?

The official answer to this question is NO, because of the design and construction of the chainsaw itself.

Why You Might Want to Put a Longer Bar on a Chainsaw

There are times when it is simply not possible to cut something from the ground with your normal saw because of the height of the object that needs cutting or because of strong winds that make things dangerous.

Different Types of Bar Designs for Different Chainsaws

Before you go out shopping for a longer bar, it is important to understand that they are designed differently depending on the type of saw you currently own.

Bar Lengths

Remember that a longer bar will not always give you more reach. It all depends on the angle at which you cut too. For example, if your tree branches are growing horizontally, a 10-inch bar may be too long for you to use because of the angle.

Chainsaw Maintenance Tips for Longer Bars

Even if you have bought the correct length of chain for your chainsaw using a longer bar, you will still need to keep your saw well maintained.

Benefits of Having an Extended Bar on Your Chainsaw

There are some definite benefits of having an extended bar on your chainsaws. These include:

Conclusion

Can you Put an Extended Bar on a Chainsaw? An important thing to keep in mind before we begin is that not all saws are suitable for extended bars. It all depends on the length of your bar and how well it fits onto your particular chainsaw model.

What size chainsaw bar do I need?

The size of bar required will depend on the type of cutting you are planning to do.

Who makes the best chainsaw bar?

Many chainsaw manufacturers produce their own cutting components. Stihl and Husqvarna are just two manufacturers who have quality products.

What is a sprocket nose bar?

There are basically two types – those with sprockets (called sprocket nose bars) and those without (generally referred to as hard-nosed).

What is a narrow-kerf bar?

The kerf refers to the width of the bar and therefore the type of chain it can carry. As the name implies, a narrow kerf means it has a smaller width than the standard kerf unit. As the saw cuts, it creates a channel or groove and this is the kerf. The narrow kerf bar removes less material than the standard kerf, thereby creating a narrower groove.

What maintenance should I do on my bar?

You don’t need to be a rocket scientist to figure out that the saw’s cutting components get some pretty rough treatment. As well as supporting a fast moving chain, the blade can often get pinched in wood and bent with heavy use.

How many teeth does a chain saw have?

On chainsaws, the number of teeth on the sprocket varies and those with up to 10 teeth tend to have low kickback qualities. Models with 11 teeth or more have a higher kickback tendency but better cutting performance, though these tend not to be found on homeowner saws. Most homeowner saws have sprocket nose guide bars and whilst these offer better ...

What size sprocket do you need for a carving bar?

Some carving bars have. very narrow tips. These ‘dime’ tips need a ¼ inch sprocket to run the small chains which will go round the tip of the bar.

Why do chainsaws have a 40 bar?

To give an extreme example, putting a 40” bar on a 30 cc saw would make little sense, as the engine would not have ...

How long is a chainsaw bar?

A short version of the answer is: The maximum bar length recommended by manufacturers for gasoline-powered chainsaws scales with engine size and averages to around 4” per 10 cc of cylinder displacement. While chainsaws could technically take any length bar with the right mount type and chain pitch, the recommended maximum indicates the upper limit for efficient and safe operation.

How to find out maximum bar length?

The best way to find out how long a bar should you be mounting on your chainsaw is to check the manufacturer recommendations for your saw model.

How many cc can a chainsaw run?

A chainsaw can run 1 cm of bar length per 1 cc of cylinder displacement. In the table below, you can see what kind of maximum bar lengths this 4”/10cc rule produces for common engine sizes. Engine size. [cc] Max bar length. [in] [cm] 30 cc. 12”.

What makes a guide bar compatible?

What makes a bar compatible? In short, a guide bar is compatible with a certain chainsaw if it has two things: the same bar mount type and the same chain pitch as the saw.

What is the rule for saw size?

Using the rule. The rule is intended to give you a rough idea of the bar length each saw size can typically run well . A few points: You can use the rule to roughly determine the max bar length for your saw in case you find no info from the saw manufacturer.

What is the maximum bar length for a saw engine?

saw engine size can be formed: for gasoline-powered saws, the maximum bar length in inches is 4/10 times the saw engine displacement in cc. This can be expressed mathematically as

What is the part number for Stihl oil pump?

For the oiler, Stihl makes a high output oil pump for the homeowner saws. 1123 640 3201 is the part number for the oil pump. Yes, that's an MS250 part number, yes it'll fit right into the MS170 & MS180 saws.

Does the 170 have an adjustable oiler?

Edit: I forgot that the 170 does not have an adjustable oiler, so the 20" bar is definitely a no go.

Can I run a 16" bar on a Stihl saw?

I run a 16" bar on mine. I wouldn't go longer though. The oiler isn 't designed for a bar longer than that and the saw lacks the power . Ask your local stihl dealer, they should be able to hook you up with whatever you need.

Bar Length Based on Chainsaw Power

• The biggest thing that affects the compatible length of chainsaw bars, is the engine power of the chainsaw. That’s what we’ll focus on in this section. If you’d like to learn about pitch, gauge, and other bar measurements (other than length), check out our comprehensive chainsaw bar guide. …

See more on burlybeaver.com

Find & Use The Manual: The Easy Way

What Else to Change with The Bar?