Which to buy first, jointer or planer?
My answer is always the same: “Get yourself a jointer first, then think about a planer.” The reason is that in many cases, the jointer is part of the foundation of your collection of woodworking tools. Just like when you are building a house, you want the best foundation you can get so the rest of the house can be built squarely and accurately.
Can I use a router table as a jointer?
Yes you can use a router table as a jointer but only as an edge jointer for removing small nicks and bumps on your edges. The one advantage a router has over a jointer is in the blade selection for the router bits.
How to properly use a wood planer?
Step By Step Instructions on How to Use a Surface Planer
- Identify and educate yourself about the setup of the surface planer. A: Familiarize yourself with how the surface planer operates. ...
- Test how the machine works. Once you have learned how the surface planer is set up, the next step is to test the machine. ...
- Wear ear protection once you are ready to operate the surface planer.
How to properly use a jointer?
Step by Step Instructions on How to Use the Jointer
- Familiarize yourself with the machine—its parts, features, and functions. Comprehending what the jointer is capable of is critical to maximizing its potential. ...
- Make Certain that the Jointer is Properly Tuned. The jointer’s tables must be perfectly parallel to each other. ...
- Square Up the Jointer’s Fence. ...
- Know the Limitations of the Board Stock. ...
How to get the first side of a wood planer flat?
What is a planer used for?
About this website
Can you use a planer instead of a jointer?
A planer can be used as a jointer by following a few woodworking tricks. Woodworking jointers and planers are used to mill wood so they can be used to build furniture and other projects to correct dimensions.
How do you use a surface planer as a jointer?
0:259:56Planing Jig - How to Use Your Planer to Joint Wood - YouTubeYouTubeStart of suggested clipEnd of suggested clipBecause the wood is wider than the jointer knife so this area here doesn't get jointed. What you'reMoreBecause the wood is wider than the jointer knife so this area here doesn't get jointed. What you're looking at is a piece of wood that I have that is almost 8 inches wide. That.
What can I use if I don't have a jointer?
2:077:425 Ways to Joint a Board Without a Jointer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that just the entirety of the edge is hanging over and it doesn't really matter what orientationMoreSo that just the entirety of the edge is hanging over and it doesn't really matter what orientation you have it as long as a piece of the edge is hanging over you're going to get a straight edge.
Can you face joint with a planer?
0:215:52Joint with a Thickness Planer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you've used the jointer. And build one face of the board flat you use the planer to mill theMoreAfter you've used the jointer. And build one face of the board flat you use the planer to mill the other face of the board to the thickness you desire.
Should I plane or jointer first?
That is why you should go for the planer first. Then later, you can get a jointer. Also, even if you have flat faces of wood but the edges of the board are not flat or square, you can always use a circular saw with a guide, a table saw or a hand planer to get the edges square.
How do you make a jointer out of a planer?
8:4111:23Turn Your Hand Planer into a Jointer for Only $10 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy just loosen the wing nuts. And pop off the fence. From here when you want to takeMoreIt's pretty easy just loosen the wing nuts. And pop off the fence. From here when you want to take this off just unplug your planer loosen the back screws.
How do you true wood without a jointer?
5:4719:11Milling Rough Lumber Without a Jointer Using a Few Simple JigsYouTubeStart of suggested clipEnd of suggested clipProcess if you have all the right tools would actually be to use a planer. So you take the freshlyMoreProcess if you have all the right tools would actually be to use a planer. So you take the freshly jointed face. And you put that on the bed of the planer.
How can I get flat edges without a jointer?
0:082:07How to Get a Straight Edge Without a Jointer - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you know this edge is straight and what you can do is hot glue this board to the straight edgeMoreBut you know this edge is straight and what you can do is hot glue this board to the straight edge and then run the straightedge against your fence.
Do I need a jointer if I have a table saw?
Jointing with Table Saw to Square Both Sides of a Wood Piece (without jointer) Although the table saw can be used as a jointer to make the faces of a wood piece flat, it can also be used to square an edge to have perfectly perpendicular faces.
Will a planer flatten a board?
In order to flatten a warped, twisted, or cupped board, a common approach is to first use a jointer to create one perfectly flat face. Then you run the board through a thickness planer with the flat face downward, and the planer makes the top face parallel to the bottom.How to Flatten Boards With Just a Planer - Instructableshttps://www.instructables.com › How-to-Flatten-Boards-W...https://www.instructables.com › How-to-Flatten-Boards-W...
Are planers worth it?
If you really want to get into woodworking, a thickness planer is worth the cost. Once you have it, you'll never regret the expenditure, because you'll be in control of your stock thickness like never before.Do I Really Need a Thickness Planer? | Videos | Plans | How Tohttps://www.woodworkersjournal.com › really-need-thick...https://www.woodworkersjournal.com › really-need-thick...
Can I run glued wood through a planer?
Unless you're just ploughing off big wads of uncleaned glue left laying on the surface of the wood, then, "No," the glue will not clog up the planer. Now for the most important question. The glue should be dry before planing.Will Dried Glue Clog Up My Planer? - Rocklerhttps://www.rockler.com › learn › dried-glue-clog-planerhttps://www.rockler.com › learn › dried-glue-clog-planer
Will a planer flatten a board?
In order to flatten a warped, twisted, or cupped board, a common approach is to first use a jointer to create one perfectly flat face. Then you run the board through a thickness planer with the flat face downward, and the planer makes the top face parallel to the bottom.
How do you joint boards on a hand plane?
3:1311:31How To Joint a Board Without a Jointer | Hand Tool Woodworking SkillYouTubeStart of suggested clipEnd of suggested clipSo I want to show you some of the basics of how you can do it with a with a regular number 4 we'reMoreSo I want to show you some of the basics of how you can do it with a with a regular number 4 we're just gonna start back here advance. It until I get a cut.
How to Turn Your Planer Into a Jointer - YouTube
My website: https://woodspirit.net/Link to tools I use: https://woodspirit.net/products-i-use/ I needed to square up some stock without a jointer. I was able...
Turn Your Planer into a Jointer - FineWoodworking
@USAFCheif, also a good tip, but you're gluing, clamping, drying, planing the assembly (upside down from how you glued it, I assume?), ripping the glue joint off on the TS, and then planing to thickness.
Jointer vs Planer Differences. Which One Do I Need First?
If you’ve ever wondered about the difference between a jointer and a planer, you’re not alone. Maybe you’ve even debated buying one or the other, but you’re not sure which one to get.
How to get the first side of a wood planer flat?
By setting up your stock on a flat table that can slide through the planer, and using a sticky mat and shims to level the wood out, you can get the first side of the wood flat, the biggest obstacle in milling wood. Once one side is flat you can plane the other side which will make it parallel to the first and you've got yourself a milled piece ...
What is a planer used for?
A planer can be used as a jointer by following a few woodworking tricks. Woodworking jointers and planers are used to mill wood so they can be used to build furniture and other projects to correct dimensions.
What is the difference between a planer and a jointer?
The main difference between a jointer and a planer is that a jointer is used to flatten the uneven wood surface to remove warp, cupping, and twists. Whereas an electric planer is used to make the board flat , parallel with uniform thickness.
What is a jointer used for?
A jointer is used to perfectly flatten one face of a board, and square an adjacent edge. Additionally, jointers can also be used to flatten cupped boards, remove twists, and prepare boards for wood joinery to use as one large piece.
What is the outfeed table on a jointer?
The outfeed table of the jointer is slightly higher than the infeed table to accommodate the depth of cut. Once you have a flat reference face, you can square the edges as well. To do this, place the flat side of the lumber against the fence and move edges across the cutter head.
What is the best tool for flattening one face?
For a user whose job is mostly to flatten one face and square up one edge, a jointer is the best option. While some, with constant work on two flat and parallel faces, will choose a planer as the best option and an ideal alternative. Regardless of the amount of work you have, you will need a planer, jointer, or both.
What is an electric thickness planer?
Thickness Planer. An electric thickness planer reduces the thickness of the lumber parallel to the bottom face to get uniform thickness throughout the cross-section. The machine has infeed and outfeed pressure rollers that will feed the wood through at constant speed.
What is a planer that takes in wood pieces with one flat side and makes the opposite side parallel to it?
A thickness planer takes in wood pieces with one flat side and makes the opposite side parallel to it.
What is a wood planer?
A wood planer is a tool that is used to alter boards so that they are both flat on all sides and uniformly thick. There are two distinct categories: 1 Handheld 2 Thickness Planer
Why Should You Use a Jointer Before a Planer?
But, just in case you are unaware or not on board just yet, we will run through the specifics.
What is the Difference Between a Planer and a Jointer?
Before we can dive into why you should use a jointer before a planer, we should cover the basics of what these two devices can do for your lumber. From here, you will have an increased understanding of how they work and can more fully comprehend why one should be used before the other.
What would happen if you used a jointer after a planer?
What could happen if you were to use a jointer after a planer is that the planer would essentially do the work on both sides that the jointer would have done. This is why many people opt to use a planer in the first place- even though it is not quite as phenomenal at the square ends. Still, using a jointer after a planer would be relatively pointless.
How to make both sides of a wood table parallel?
To make both sides perfectly parallel, you will need to run the piece of wood through a bandsaw or table saw with the flat side you made with the jointer against the fence of the table or band saw.
What does a wood planer do?
What your planer will do is use the guide that you provide to flatten out both the top and the bottom (or the two opposing sides, depending on how you look at it) of your piece of wood. As you slide the piece of wood through the planer, you will want to ensure that the edge is held square.
Can a wood jointer be uneven?
Instead, it could become uneven wherever the jointer has to move in the natural wood grain direction.
Can you use a planer and jointer to smooth out wood?
You will find that both woodworking tools can provide a high-quality evenness on the sides intended to smooth out. In fact, when working with a planer or jointer, you will be pleased with the ability of both devices to cut through the uneven lumps and bumps that come with the natural wood grain on your beautiful piece of lumber.
What happens if you put a straight surface in a planer?
If you place a straight surface, either an edge or a flat surface in the planer, it will make the opposite surface, the one pointing up, parallel to it. SO...if you start with a straight surface, possibly from a jointer or the table saw, why not use the same tool for all the boards?..
What happens if the bottom surface of a planer is not straight?
If the bottom surface of the board is not straight, the planer will simply duplicate any bow on the top surface, it will not straighten a warped or curved board. JMO :blink: bill
Can a planer make a face flat?
While the planer may a smooth the edges and flatten them, there'll be no guarantee that they're 90° to the face. Edge jointing with a router or TS can at least use the flat face as a reference to get a 90°, the planer can't.
Can you put metal parts through a planer?
A word to wise, never under any circumstances should you put anything with metal parts thru a planer! This is how strange and unexplained accidents have occurred. I had one case where the guy was using a sled with nuts and bolts and one of the nuts came loose and went into knives. He said all the nuts were tight, I still had to report, unexplained, possible human error. Their is always a way of doing things, that won't put you in harms way! Be safe and have fun!
Can you cut one edge straight?
I would cut one edge straight first, though. Use a circular saw and edge guide. If you have one edge straight, you wouldn't need the sled.
Can you use clamps to hold boards?
If I understand your question you are passing the boards through on edge and using the clamps to hold them stable. It's easily done as long as you insure that the clamp will clear the sides and will not touch the cutters.
How to plan a round wood table?
Edge planning of round wood: Make two zips according to the wooden round and set them on two tables. Then it will be easy to plane on the edge machine of the round table.
How many cutters can be set in a cutter head?
Cutter Head: This is a round block in which 2 to 4 cutters can be set.
How to cut a wooden bevel?
Way of cutting wooden bevel: The fence of the machine is set according to the wooden bevel. The set can be cut by dropping the wooden plane phase. Edge chamfer can also be cut in this method.
How to get the first side of a wood planer flat?
By setting up your stock on a flat table that can slide through the planer, and using a sticky mat and shims to level the wood out, you can get the first side of the wood flat, the biggest obstacle in milling wood. Once one side is flat you can plane the other side which will make it parallel to the first and you've got yourself a milled piece ...
What is a planer used for?
A planer can be used as a jointer by following a few woodworking tricks. Woodworking jointers and planers are used to mill wood so they can be used to build furniture and other projects to correct dimensions.
What Is A Jointer?
- A jointer is used to perfectly flatten one face of a board, and square an adjacent edge. Additionally, jointers can also be used to flatten cupped boards, remove twists, and prepare boards for wood joinery to use as one large piece. The jointer has infeed and outfeed tables set precisely parallel to each other with a rotating blade between them. You will pass the rough lum…
What Is A Planer?
- A wood planer is a tool that is used to alter boards so that they are both flat on all sides and uniformly thick. There are two distinct categories: 1. Handheld 2. Thickness Planer WEN Benchtop Thcikness Planer – Click to See Details Handheld planersare most useful when the board is immobile due to one of the reasons such as its weight or unusual shape. Wood that is t…
Differences Between Jointer vs. Planer
- The main difference between a jointer and a planer is that a jointer is used to flatten the uneven wood surface to remove warp, cupping, and twists. Whereas an electric planer is used to make the board flat, parallel with uniform thickness. On a jointer, the blade is below the workpiece, while in a planer the cutter head is above the work. For most woodworkers, the terms jointer and plan…
Which Is Better? Jointer Or Planer?
- For a user whose job is mostly to flatten one face and square up one edge, a jointer is the best option. While some, with constant work on two flat and parallel faces, will choose a planer as the best option and an ideal alternative. Regardless of the amount of work you have, you will need a planer, jointer, or both. But it’s ultimately a decision ...