Can you use bookshelf speakers for ATMOS?
Upgrading your current surround sound home theater to Atmos can be an expensive exercise. So, you wouldn’t be the first to wonder if you can use a spare set of bookshelf speakers for Atmos. You can use bookshelf speakers for Atmos in two ways. Set them on top of your front speakers, angling them up to the ceiling.
How do I get Dolby Atmos sound?
You can use a dedicated Atmos receiver, or a receiver that supports Dolby Atmos along with other favorites like DTS: X, and Auro-3D. Or, you can use a pair of bookshelf speakers to experience Atmos with a big improvement in sound quality. Many of these speakers can be found used for a fraction of the price of a home theater receiver.
What are the best speakers for Dolby Atmos?
The Sony SSCSE Dolby Atmos Enabled Speakers (Amazon) are a good example. The advantage of this type of speaker is that you keep your current front speakers. So you can get a version of the Atmos experience at a reduced cost. How Can You Use Bookshelf Speakers for Atmos?
How far apart should speakers be for Dolby Atmos?
If using two Dolby Atmos-enabled speakers, place them at the front left and front right speakers sites. For the most impressive performance, have your speakers at or slightly above ear level when seated. If using add-on modules, place them atop your front and surround speakers or about 3 feet (0.9 meters) from the speakers.
How Can You Use Bookshelf Speakers for Atmos?
What is a good book shelf speaker?
What Is Atmos?
What are bookshelf speakers used for?
What is the Atmos experience?
What is the virtual version of Atmos?
How much weight can a Monoprice speaker hold?
See 2 more
Can you use a bookshelf speaker for Atmos?
If you're going through all that trouble, then in-ceiling speakers would be easier and probably sound better. The idea of using bookshelf speakers for ATmos is to HANG them from the top of the wall or FROM the ceiling, not mounting them IN the ceiling.
Can I use regular speakers for Dolby Atmos?
Dolby recommends at least four height speakers for the best result, and any speakers will do. Even better, you won't need a special Blu-ray player, since all current players support Dolby Atmos. Also worth noting is that all of your HDMI cables will work with Dolby Atmos as well.
Do you need Atmos speakers for Dolby Atmos?
A No, it's not true that you need to buy a new “Atmos speaker” system for playback of Dolby Atmos soundtracks. What you probably will need is to add speakers to your existing setup, however.
Can I use bookshelf speakers for surround sound?
Bookshelf speakers are often used as surrounds or if space is a limitation, both passive and powered bookshelf speakers can make great front speakers. As for crafting the perfect surround sound experience, few things compare to the wide-reaching bipolar speaker setup.
Do you really need Dolby Atmos?
Is Dolby Atmos Worth It: An Overall Assessment. Dolby Atmos provides an immersive and realistic sound environment for your home theater, plus excellent film recording that makes Dolby Atmos definitely worth it. It mimics the technology in cinemas, with a surround sound coming from all angles.
What is required for Dolby Atmos?
You must have at least two height channels for a Dolby Atmos system. Therefore, the minimum number of channels for Dolby Atmos is 2.0. 2, which is a stereo speaker system with two overhead/height speakers. However, Dolby recommends four height speakers for the best 3D experience.
Is 7.1 better than Atmos?
7.1 Surround: What's the Difference? Dolby Atmos adds overhead sound and improved calibration software, which makes the sound deeper and more precise than traditional Surround 7.1 systems.
Is Dolby Atmos better than DTS?
While each has its advantages, Dolby Atmos is ultimately comes out on top. Sure, DTS:X has a higher bit rate, no need for height channels, and even allows users to isolate certain sound objects like voices or sound effects. But Dolby Atmos has far more support in the home theater and cinema, and for a good reason, too.
Does Netflix have Dolby Atmos?
You can watch Netflix in Dolby Atmos audio on select TV shows and movies. You need: A Netflix plan that supports streaming in Ultra HD.
Can I use a bookshelf speaker as center channel?
It generally isn't a good idea to use 2 bookshelf speakers as a center channel since audio cancellation can occur from nulls. However using 1 speaker as a center channel is acceptable as 3 identical speakers in a line array can produce a more realistic result when the sound pans from one side to the other.
What are bookshelf speakers good for?
Bookshelf speakers are meant to rest on a shelf, table or other elevated surfaces – anywhere but the floor. They're specifically designed to maximize sound in small to medium-sized spaces.
Can I use any speakers for surround sound?
There isn't a correct size for surround speakers. You can use tower, bookshelf, or small satellite speakers for surround sound, and you just need to decide what works best for your room. Most people will have surround speakers that are the same size – or smaller than the front speakers.
Can you use any speaker as Atmos height?
Most AVRs will support the use of front height (Dolby® Pro Logic® IIz) mounted speakers with Dolby Atmos playback; however, we recommend the use of either overhead or Dolby Atmos enabled speakers to create the most lifelike and enveloping audio experience.
Can I add Atmos to existing receiver?
Just add a Dolby Atmos receiver. So, yes, if you want to take advantage of true Atmos surround you'll need new hardware. But Dolby Digital is still the default for everything, so this isn't a required upgrade. If you're not interested in Atmos, your gear will still work.
Do I need rear speakers for Atmos?
Atmos Speakers They should be in line with your left and right main front speakers. For elevation Atmos speakers (or Dolby Atmos-enabled speakers), simply place them on top of your front left and right speakers and rear left and right speakers.
Can optical carry Dolby Atmos?
Optical cables don't carry Atmos, however. Connecting a source like Blu-ray directly to the receiver/soundbar has another benefit: Doly Atmos, Dolby True HD and DTS Master Audio. If you have an older TV these higher-fidelity formats can't be sent over ARC. But they will be able to with eARC.
Who is Gene from Audioholics?
Gene manages this organization, establishes relations with manufacturers and keeps Audioholics a well oiled machine. His goal is to educate about home theater and develop more standards in the industry to eliminate consumer confusion clouded by industry snake oil.
Can you put an Atmos speaker on top of a companion speaker?
try it and let me know if I'm right…you will hear the difference. Yes simply plac ing an Atmos speaker on top of an ear level companion speaker has a lot of problems in both localization and in a poor ability to reflect the sound without it scattering too much prior and/or blurring the sound of the companion speaker.
Does Dolby HRTF affect elevation?
As you can see in our article, the Dolby HRTF built into all "Atmos-enabled" speakers can actually degrade the elevation effect depending on how each individual perceives sound. It also over complicated the design causing more problems than it solves and, in our opinion, is NOT a necessary element in such a product.
Can Yamaha A-860 decode DTS?
While Atmos/DTS:X may not be embedded into the frontpanel silk screen of your Yamaha A-860 receiver, rest assured it is in fact fully capable of decoding Atmos and DTS:X though you may need to get the free firmware update for the latter depending on when you purchased your unit.
Do Atmos speakers send sound above your head?
remember atmos speakers are not only designed to send sound above your head…thats down to the studio sound engineers…their also there to give the impression of space around you which i can honestly say they do now that I've experimented with the angles of them.
How many speakers can you use for Dolby Atmos?
How to Set Up Your Speakers for Dolby Atmos. While it’s true that with a home Atmos system, you can support up to 34 speakers, such a setup might not be necessary. Indeed, the home Atmos systems can reproduce all the 128 audio objects even across seven speakers.
How many speakers does a Dolby Atmos cinema use?
As it is, top Dolby Atmos cinemas use up to 400 speakers! What’s more, the technology is used on both video and audio equipment.
How Does Dolby Atmos Work?
Dolby Atmos expands on the familiar 5.1 and 7.1 surround-sound setups with surround channels coming from overhead.
Can You Use Any Ceiling Speaker for Dolby Atmos?
These objects may move around in three-dimensional space. As such, you should opt for overhead speakers that are timbre-matched to the primary listener-level speakers.
How to get Dolby Atmos sound in living room?
To recreate the overhead sound of Dolby Atmos in your living room, you can either position your speakers along the walls or behind the screen. Alternatively, you can do any of the following: Add two or four ceiling speakers. Install add-on speaker modules in addition to your main floor standing or bookshelf speakers.
What is Dolby Atmos based on?
Remember, Dolby Atmos home theatre system is based on audio objects, sounds in movie scenes such as a flying helicopter, not on channels .
What is the most significant development in cinema audio since surround sound?
According to Dolby, the company behind this cutting edge audio technology, Atmos is “the most significant development in cinema audio since surround-sound.”
How high can you set the crossover on an Atmos speaker?
Pretty much any speaker will work. You can set the crossover to 120 or 150hz or higher if using "regular" speakers. There are some Youtube videos comparing up firing, wall mounted at the ceiling and in ceiling.
Can you use JBL speakers in ceiling?
If you want ceiling mounted speakers but not in-ceiling speakers, my advice is to use the JBL SCS-8. If you have a high ceiling, you could also get away with using some JBL Pro 9300 mounted on the wall, if they are high enough. If you don't need that kind of dynamic range, and want to save a few dollars, the SVS elevation speakers could also do well there.
Can PSB speakers angle?
I use PSB CS500 speakers on the ceiling in the back. The can angle quite nicely. A guy I know that has a Trinnov uses the CS1000 for all six of his ceiling speakers so they can't be too bad. I use the PSB B15 in the front height on an actual bookshelf angled down with studio foam inserts. I also changed the tweeters to ones with very good off-axis response. Audyssey had no issues with correction.
Can you use a bookshelf speaker as a ceiling speaker?
To be sure, you can use regular bookshelf speakers as ceiling mounted atmos speakers, but it is a very flawed approach for a few reasons. One is, as you know, that speaker is closer to a surface that is intended. That will increase diffraction and also boundary gain.
Can BS speakers be used as atmos?
Sidenote, BS speakers can’t be used as atmos modules since they use a notch in the FR that’s engineered to help avoid localization. Sidenote 2. The speakers in your pics have activated my AudiOCD. They’re too low.....must.......be...centered...on........the..screen..... “Twitching”.......
Do ceiling speakers have off axis cancellation?
As for dispersion, there are a few different ways that is dealt with. Note that most ceiling speakers are coaxial, so they won't have off-axis cancellation. There are some ceiling speakers that are not coaxial designs, but they mostly have their own way of placing the tweeter as the true acoustic center of that speaker.
Can a woofer cancel out a tweeter?
Since there is no distance from the tweeter to the acoustic center of the woofer, there is no way they can cancel each other out off axis. When drivers are separated by a distance, that creates a cancellation null at positions where the drivers are not the same distance from the listener. This is why there are all kinds of nulls that form on an off-axis response on a vertical plane of a typical speaker but the horizontal plane can often be very solid with no nulls. Note that an exception to that is horizontal MTM center speakers where woofers do see a distance difference as you move off horizontal axis, and so nulls form.
How Does Dolby Atmos Work?
Audio content is most immersive when it comes from all around you so that it sounds like it is truly all around you. Achieving this immersive effect is simply a matter of recording the different sounds coming from these different speakers spread out around a room and playing them back with equal volume.
What Is Dolby Atmos?
The best way to experience Dolby Atmos is to have speakers in your ceiling that allow you to experience audio coming, not just from above, but from the sides and corners as well. But with the advent of virtual reality, many people have started to use speakers that rely on a designated “sweet spot” below or behind you on the ground to experience the audio.
Where are integrated speakers located?
Integrated speakers are formed by two sets of loudspeakers located in front of the screen and above the audience which are built in the ceiling. Each set of speakers has the role of representing a direction with a complete sound, with a height of 3D surround sound.
Can you use Dolby Atmos with an older speaker?
While any speaker could technically be used for Dolby Atmos, you won’t get the best or authentic sound experience if you use an older speaker. Dolby Atmos takes surround sound to a new level and both the height channel and the individual overhead sound effects require special speakers that can reproduce those audio frequencies.
Can You Use Any Ceiling Speaker for Dolby Atmos?
1.4 A common question from people who want to play Dolby Atmos discs is whether any speaker will work for this purpose. The answer to this question is a qualified no. Unless you are using a Dolby Atmos speaker system, you may not get great results. Here’s why this is true.
Which tweeter has better horizontal dispersion?
If you are going to go with the Prime, consider these instead, as the leaf tweeter will have superior horizontal dispersion, less treble exaggeration, plus ... you'll save some bucks in the process.
Can you mount a spherical sphere vertically?
You can mount them vertical or horizontal if you like to get them up closer to the ceiling ....I like how they look in a vertical orientation.
Can bookshelf speakers do better than elevation?
These two items where recommended by @Zorba922 and he's been of great help but i need to give him a break! Apparently bookshelf speakers can do even better than elevation speaker s or so this forum post says
Do speakers have dispersion?
The speakers will have a dispersion in the room. Different speakers have different dispersion patterns. You can compare the sounds of "surround speakers" (sattelite, elevation) versus "bookshelf speakers" at the Crutchfield website and find out for yourself what the difference is. For an A/B of bookshelf vs surround, use 2 browser windows.
Can you hear off axis speakers?
So someone sitting off-axis will still hear the sounds coming from the speaker location, but the more off-axis they sit the lower the "quality" - and this varies between speakers. Some speakers have a wide 90 deg dispersion (so sitting 45deg off-a xis is still ok but not ideal) but some only have 60deg so sitting 45deg off-axis will be poor.
Does the A4.5 have the same tweeter?
The A4.5 uses the same tweeter and is likely to have the same issues .
Can you mount a prime elevation speaker to a ceiling?
The Prime Elevations speakers are big and heavy and not easy to ceiling mount if you don’t know what you’re doing. Also, you will save money and get more decor friendly speakers if you opt for four small cubes such as the Polk Blackstone, Cambridge Minx, Mirage Omnisats, etc.
What is the Atmos standard?
Mainly the Atmos standard is sound format which doesn't have the traditional discret channels like 5.1 or 7.1. You give your receiver the information where your speakers are standing and it will process the sound file to the suited speaker.
What is upfiring atmos?
Upfiring Atmos speakers are more than regular speakers and for everyone who are not able to mount something into the ceiling. Their way of functioning is that their soundwaves are able to reflect from the ceiling to your listening position and you can still hear everything clearly, in theory. The problem is that every ceiling is different, height, material.
Can you angling speakers without a protractor?
Angling the speakers correctly makes a BIG difference. I'm sure you could do it without the laser protractor but I already had one from other projects and it basically made angling the speakers correctly trivial.
Is in ceiling sound better?
For sound quality and similar prices , yes. But for Atmos location matters more and for this reason in-ceiling is better.
Do you need an ATmos speaker?
There are no special "Atmos" speakers you need. There are 2 ways to use this sound format.
Do bookshelf speakers outperform ceiling speakers?
Bookshelf/free standing speakers will always outperform in ceiling/in wall speakers unless you go high end.
Can you put a speaker on top of a bookshelf?
If you can get a bookshelf speaker on top of a high bookshelf or stand as close to the ceiling as possible it'll work fine. Don't bother trying up-firing.
How Can You Use Bookshelf Speakers for Atmos?
As discussed above, one advantage of bookshelf speakers is their compact size. That makes it possible to place them and move them wherever you want. Probably this versatility is why you might be looking at using them for Atmos.
What is a good book shelf speaker?
The Polk Audio T15 100 Watt Bookshelf Speakers (Amazon link) are an excellent example of decent bookshelf speakers. They’re wall-mountable. That’s useful if you don’t have shelving or the floor space for a stand to accommodate them.
What Is Atmos?
Dolby Atmos is an extension of the familiar 5.1 or 7.1 surround sound of the home theater setup. It adds another dimension, the vertical dimension.
What are bookshelf speakers used for?
In a home theater environment, you use bookshelf speakers as the main left and right front speakers. But, their flexibility and compactness mean they’re often also used as surround speakers for the rear positions in a home theater setup.
What is the Atmos experience?
The genuine Atmos experience is in the form of ceiling speakers. With ceiling speakers, sound rains down from the ceiling to the listening position.
What is the virtual version of Atmos?
The virtual version of Atmos consists of forward-firing speakers with additional drivers at the top. The top drivers are angled to fire sound up, so it bounces off the ceiling and down to the listening position.
How much weight can a Monoprice speaker hold?
Angled wall mounts like these Monoprice 106839 Adjustable Speaker Wall Mount Brackets, hold up to 33lb (14.9kg).
