Safety Tips for Using a Hedge Trimmer After the Rain
- Dress for Safety You should always wear clothing that covers your arms and legs, such as pants and a long sleeve shirt. Small pieces of wood can cause injury to your skin. ...
- Keep Your Blade in Good Condition Cutting wet shrubs is difficult enough without adding the complication of dull blades. ...
- Lube Your Blade Photo 161698142 | © Sylwia Szmulewicz | Dreamstime.com ...
- Avoid Rust ...
What Are Electric Hedge Trimmers?
Why do hedge trimmers need to be cleaned?
How to get rust off a trimmer blade?
How to prevent rust on hedge trimmer blades?
How big is a hedge trimmer?
How many sharpened sides does a hedge trimmer have?
Why does my hedge trimmer rust?
See 2 more
Is it safe to use electric hedge trimmer on wet hedge?
You should never cut your bushes or hedges in the rain, and this is especially important when using an electric hedge trimmer as water and electricity don't mix! If the weather is fine to work in, check your equipment is in good working order and not damaged in any way.
Is it OK to cut a hedge when its wet?
Don't Trim Your Hedges in Wet Weather And, of course, we recommend that. But if you do want to tackle them yourself, have patience and wait until it's dry or has at least stopped raining.
Can you use battery hedge trimmer in the rain?
If you are using consumer batteries with your equipment, you should not use them during rainy weather conditions.
Can you use a trimmer in the rain?
Safety Issues of Using a String Trimmer on Wet Grass Also, if you are using an electric trimmer while it's still raining, there is a risk of electric shock and damage to the trimmer. These are some of the most important reasons to wait until your grass is dry before breaking out the string trimmer.
When should you not cut hedges?
We recommend avoiding hedge cutting during the main breeding season for nesting birds, which usually runs throughout March to August each year. This can be weather dependent and some birds may nest outside this period, so it is important to always check carefully for active nests prior to cutting.
How do you cut hedges with electric trimmers?
2:276:17How to Use an Electric Hedge Trimmer to Trim Bushes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then we'll finish off the top. One more real good idea is to wear leather gloves when you doMoreAnd then we'll finish off the top. One more real good idea is to wear leather gloves when you do this even without the thorns. Just so that it makes your fingers a little more bulky.
Can I use electric trimmer on wet grass?
You should avoid using an electric or battery powered weed trimmer in wet weather. To start, these conditions can put added stress on the motor, shortening the operating life of the grass trimmer.
What can you not do with a hedge trimmer?
Never use a hedgetrimmer in wet weather. it is dangerous, particularly if you are using a mains electric powered machine. It is also not effective and will not produce good results. Don't drink alcohol or any mind-altering substances before, or during, hedgetrimming.
What is the difference between a hedge trimmer and a hedge cutter?
What is the difference between a hedge trimmer and a hedge cutter? Usually, hedge trimmers are used for 'light work' on branches and bushes. Tidying up and shaping shrubs is another of their functions. However, heavy-duty work is more suited to hedge cutters; for example, breaking down big branches and thicker bushes.
Is it OK to Weedeat wet grass?
Is it okay to weed eat after it rains? Yes, weed eating after it rains is perfectly fine. The only thing you should not do is mow when the grass is wet because your lawn will look like it has mohawks. This happens because the front tires flatten the grass and it does not spring up quick enough for the blades to cut it.
How long does it take for grass to dry after rain?
Wait a Few Hours – If you've only had light rain, you'll probably only need to wait a few hours (4 or 5 should be enough) for the grass to be dry enough for you to mow safely. Particularly if it's summer and there's strong sunshine that will evaporate the moisture quickly. Are Pavements, Patios and Paths Dry?
Can you use a gas hedge trimmer in the rain?
A Hedge trimmer usually can't tell a difference between a wet hedge and a dry hedge. It can cut through both of them but with little difficulty when you are cutting wet hedges. What happens is the branches become soft due to rain because they absorb water and a little difficult to break.
What is the difference between a hedge trimmer and a hedge cutter?
What is the difference between a hedge trimmer and a hedge cutter? Usually, hedge trimmers are used for 'light work' on branches and bushes. Tidying up and shaping shrubs is another of their functions. However, heavy-duty work is more suited to hedge cutters; for example, breaking down big branches and thicker bushes.
Can you cut a hedge with a strimmer?
Once you've completed the bigger gardening jobs, like mowing the lawn and cutting back larger trees and overgrown bushes and hedges, the humble strimmer can really come into its own.
Can you use a hedge trimmer on a wet hedge? - TheArches
Technology has made everything easier. Gone are the days when we have to use big scissors to cut our hedges in the proper shape. They require more precision and if a new person tries it then it might ruin the look as well. We had to hire a gardener occasionally so he cuts everything perfectly.
What Are Electric Hedge Trimmers?
Hedge trimmers come in different sizes, but most have a length of about 22 -24 inches. Many homeowners use them to cut back tall plants such as shrubs and hedges
What happens when the hedges are wet?
A hedge trimmer can’t tell whether or not a hedge is wet or dry. It cuts through both types of hedges equally well. But since it’s designed to cut through thick branches, it works better on dry ones than wet ones.
How to Use an Electric Hedge Trimmer After the Rain
You should be careful about using your electric hedge trimmer after heavy rains because you don’t want to get moisture near the electric motor or components on your hedge trimmer.
Some tips while cutting wet hedges
You need to sharpen your teeth before trimming the hedge. Cutting a wet hedge reduces the cutting efficiency of the blade, so you need to make sure the blades are not dull or you might be getting more tearing of the branches and cutting them
Keep Your Blade in Good Condition
Sharpening a dull blade takes time and patience. You should use a hedge trimmer sharpener like a bastard file, angle grinder, or a rotary tool like the Dremel.
Cordless Hedge Trimmers in the Rain – Probably not a Good Idea
Well, it might not have been the answer you were looking for, but using a cordless or corded electric hedge trimmer in the rain is not a good idea. You can cut hedges after a rainstorm, but you need to make sure you take care of your hedge trimmer afterward and get it dried off, relubricted, and cleaned up.
How to keep hedge trimmer from getting damaged?
Properly lubricate it – A proper lubrication will make sure that the water will not enter any of the sensitive parts of the trimmer and prevent it from getting damaged . Water can also reduce the mobility of its motion and can create an issue for the gears inside the hedge trimmer. ...
What to do if you accidentally hit a hedge trimmer?
The same goes for wearing gloves. If you accidentally hit the trimmer teeth while it’s running then it might give a small cut in your hand. Ensure your hands are on both sides of the handle while using the hedge trimmer and use protection whenever possible. Lastly, you should wear booths which have good traction.
What happens when the hedges are wet?
It can cut through both of them but with little difficulty when you are cutting wet hedges. What happens is the branches become soft due to rain because they absorb water and a little difficult to break. You can easily tell this if you have tried breaking a wet and a dry branch. A dry branch breaks much easily as compared to a wet branch. Since it’s a hedge cutter it is made to cut through thick branches with ease. So, it can cut through wet hedges without any issue at all.
How to protect hedges from injury?
Follow safety precautions – There a couple of safety precautions everyone should take while using a hedge trimmer to cut wet shrubs so it also protects them from injury. Use goggles and gardening gloves if possible while cutting hedges. What happens is sometimes while trimming hedges small pieces of branches might hit your eye.
How to apply lubricant to hedge trimmer?
To apply lubricant, use a rag so you don’t cut your fingers from the sharp teeth. Protection Against Rust – Water left on the teeth can oxidize the metal and start building rust on it. Especially when you are cutting a wet hedge after a rain. To ensure there is no problem later on always clean your trimmer teeth with a dry rag and let it dry in ...
How has technology made cutting hedges easier?
Technology has made everything easier. Gone are the days when we have to use big scissors to cut our hedges in the proper shape. They require more precision and if a new person tries it then it might ruin the look as well. We had to hire a gardener occasionally so he cuts everything perfectly. Now with the introduction of Hedge trimmers, the work has become much simple and anyone can do it now. You don’t have to apply much physical power; it saves you a lot of time alongside and most importantly you don’t have to hire a gardener anymore.
Why are my hedges soft?
What happens is the branches become soft due to rain because they absorb water and a little difficult to break. You can easily tell this if you have tried breaking a wet and a dry branch. A dry branch breaks much easily as compared to a wet branch. Since it’s a hedge cutter it is made to cut through thick branches with ease.
What Are Electric Hedge Trimmers?
Electric hedge trimmers are a gardening tool that runs on a battery or electrical cord. These devices have a blade that cuts through the sturdy branches of shrubs and small bushes. If you’re new to hedge trimming, check out this excellent instructional video.
Why do hedge trimmers need to be cleaned?
This happens because the water makes debris easier to stick to the surface of the blade. It’s essential to clean your hedge trimmers after each use, making sure to remove any water or material on the sides and between the teeth. Cleaning your electric hedge trimmers is pretty simple.
How to get rust off a trimmer blade?
Place the trimmer in the sun to dry. Then apply lubrication before putting the trimmer away. If your blade shows signs of rust or seizing, you can coat your blade with WD-40 or kroil oil. These products break down any rust build-up and provide lubrication to ease movement.
How to prevent rust on hedge trimmer blades?
If you want to prevent rust on your blade, it’s crucial to wipe off any remaining water and apply rust preventative —metal oxidizes when it gets wet, which eventually results in rust. After you’ve trimmed your wet hedges, use a dry cloth to wipe down the entire blade. Place the trimmer in the sun to dry.
How big is a hedge trimmer?
You can find hedge trimmers from a smaller hand-held version with a 4″ to 6″ blade up to a full-size trimmer with a single blade between 16 inches and 26 inches.
How many sharpened sides does a hedge trimmer have?
A single action or single-sided trimmer only has one sharpened side, so you’re limited in how you can make cuts. You’ll also want to consider the spacing between the blade’s teeth, as this controls how thick of a branch the trimmer will cut. You can find electric hedge trimmers that can cut up to a ¾” diameter.
Why does my hedge trimmer rust?
One of the problems that can occur from trimming hedges after the rain is that water can cause the blade to rust. The water can also get into the sensitive inner workings of the trimmer, damaging the gears.
