Can you use Sikkens stain on a new deck?
Do not use Sikkens on decks. The only way to remove Sikkens stain is to sand it off. Sikkens stain will ruin your new deck and should not be used.
Should I apply Sikkens cetol SRD re to my deck this summer?
Contractor highly recommended Sikkens Cetol SRD RE and applied it to my deck last summer. Judging by these reviews, that was a mistake. I’d like apply a different product this summer. Some of the info and comments are contradictory. 1- Do I need to strip or just clean the deck before applying a different product?
What is Sikkens SRD stain?
PPG Proluxe (Sikkens) Cetol SRD ( S iding R ailings D eck) is a high solid 1 coat wood and decking stain. The SRD offers 3-way protection for your exterior wood. Protection from water damage, UV radiation, and Mold. Sikkens SRD penetrates deep into the wood and does not film on top of the wood.
Can you use Sikkens SRD on Cedar?
Sikkens SRD penetrates deep into the wood and does not film on top of the wood. Containing Translucent Iron Oxide Pigments, PPG Proluxe (Sikkens) SRD can be used on all unfinished exterior wood. – The PPG Proluxe (Sikkens) SRD displayed a very nice natural cedar color to the pine dock. We were pleased with the penetration into the wood.
Which Sikkens product to use for decks?
Sikkens Cetol Deck is a highly water repellent, weather resistant, high build transparent timber stain for exterior timber decks and handrails. Used as two finishing coats over Sikkens Cetol HLSe providing UV resistance and durability.
Can Sikkens be used outside?
Outdoor Protection Our Sikkens wood stains are used as a finishing coat for outdoor cladding, windows or doors. While providing a finish which will compliment any architectural or decorative style, the cetol wood stain is both microporous and water-resistant.
How long does Sikkens deck stain last?
Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side. At this point, maintenance should be performed. Maintenance is cleaning the surface gently with bleach, TSP, and water.
How do you apply Sikkens deck stain?
1:133:38Sikkens - How to prepare and coat a timber deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe solution on the surface of the deck for approximately 45 minutes using a high pressure waterMoreThe solution on the surface of the deck for approximately 45 minutes using a high pressure water cleaner ensure all boards are sprayed to remove applied oxalic. Solution and any surface contaminants.
Is Sikkens a paint or a stain?
Available in a wide-range of stain colours, and translucent, semi-translucent and solid finishes, there is a Sikkens wood stain and finish to beautify your decks, log walls, wooden siding, doors and window trim.
Do I need to sand between coats of Sikkens?
Sikkens Cetol Deck Slip Resistant GENERAL ADVICE: Do not sand between coats. Always apply coatings along the grain and never across.
What is Sikkens stain now called?
Over time, the Sikkens name grew smaller, while the ProLuxe name grew larger. Now the Sikkens branding has been dropped from the label altogether and replaced entirely with “PPG ProLuxe.” Per their purchase agreement, PPG has now dropped all additional Akzo Nobel trademarked names.
Is Sikkens deck stain oil based?
Sikkens Proluxe Cetol® SRD Wood Finish offers a non-film forming, high-quality, transparent oil-based finish for a variety of exterior wood surfaces such as logs, siding, rails, decks and deck furniture.
Can you use Sikkens on pressure treated wood?
Sikkens Cetol DEK can be used on decks, lattice, railings, and benches. Sikkens Cetol DEK may be used on: Pressure Treated Wood, Pine, Hardwoods, Cedar, Redwood, Composite Wood and Materials. High Solids Alkyd - Fewer coats needed for optimum protection and premium look.
How do you recoat a deck with Sikkens?
0:030:42Sikkens - Maintenance and re-coats of timber decks - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply to decking boards removing any contaminants such as dirt dust spiderwebs bird droppings etcMoreApply to decking boards removing any contaminants such as dirt dust spiderwebs bird droppings etc rinse with a hose. And allow to completely dry using whichever topcoat was applied last reapply.
How do you prepare wood for sikkens?
For bare wood, remove any surface contaminants, dust, grease, wax, or oils. If the wood has contaminants in the grain or has aged to a gray tone, do not attempt to sand them away. Instead, use a quality teak cleaner, as directed, to remove discoloration and stains.
Can sikkens be applied with a roller?
Apply Sikkens coatings with a good quality, long-haired bristle brush (EZEE Deck Brush recommended for decks). Bristles work the stain into the timber for better penetration and adhesion. Do not use rollers or lambswool applicator pads.
Is Sikkens oil or water based?
Sikkens Cetol BLX-Pro is a quick drying water based exterior timber finish that is ideal for decks and outdoor furniture providing good durability and flexibility.
What temperature can you apply Sikkens?
What are the best temperatures for applying Sikkens timber coatings? Ideal temperature between 10ºC and 30ºC for best results.
How long does Sikkens stain take to dry?
Sikkens Deck Stain Dry Time Drying Time – 24 hours minimum at 68°F and 65% relative humidity. At temperatures below 50º F (10º C) or conditions of high humidity the drying time will be extended. Dries to touch in approximately 6 hours. Dries to recoat in 24 hours additional coat may increase these times.
Is sikkens cetol oil-based?
Sikkens Proluxe Cetol SRD is a one coat, oil-based, transparent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs. Available in a curated palette of eight wood tones.
How long will Sikkens stain last?
Its lifespan depends on the type of stain and how it was used, but a good-quality Sikkens stain can last for up to 10 years.
How do you put sikkens on a deck?
Apply Sikkens stain to a deck with a paint pad attached to a extendable handle. Pour a small amount of stain on the pad and work the stain into the deck with long, even strokes.
How do you recoat a deck with Sikkens?
Sikkens recommends applying two coats of their product to achieve the best results. They also recommend sanding the deck beforehand to rough up the surface and create a better bond.
How do you prepare wood for sikkens?
You need to scrape off any loose paint and sand the surface to provide a good key. Once you have done this, you can then apply a primer before applying your Sikkens.
Is Sikkens good for decks?
Sikkens is an excellent decking stains that is available in a wide range of colors. It is durable and easy to apply, making it a popular choice for consumers.
What is Sikkens stain called now?
The Sikkens brand was acquired by Sherwin-Williams in 2017. The Sikkens product line is now marketed under the Sherwin-Williams Cetol DekFINISH name.
What is to coat a deck with?
A deck can be coated with a variety of different materials depending on the deck’s intended purpose. For example, a deck intended for use as a patio might be coated with concrete, while a deck intended for use as a playground might be coated with rubber.
Why is my cetol wood turning dark?
If the water penetrates and the wood turns dark due to the moisture, this is an indication that its time for a new coat of Cetol SRD. If it still repels water, do not apply a maintenance coat. When reapplying Cetol SRD, the surface should be back to bare wood; otherwise the wood may look dark, blotchy, or shiny. 25.
Is cetol 1 good for decking?
Cetol 1 and Cetol 23 Plus is a three coat system and is not recommended for a deck. In order to get durability from the product another coat should be applied. Other than removing the product and using a recommended deck system this is the only suggestion we can make.
Does Sikkens pretreatment remove graying?
No, Sikkens Log Pre-Treatment will not prevent the wood from graying. It does not contain any pigments so the wood will begin to grey during the six month to one year waiting period. This is not a major concern. The cleaning process we recommend will completely remove this slight surface graying.
How many coats of Sikkens slip resistant?from productreview.com.au
Chris...the recommended coats for Sikkens HLSe on decks is three coats, at least 24 hours apart. If the deck is in full sun keep an eye on the maintenance side of things. Do not be tempted to use Sikkens slip resistant over the HLSe.
What is Sikkens oil based?from productreview.com.au
Sikkens is a semi transparent oil or water based product . I've only used the oil based products as they soak into the timber. For exterior step treads it's good to let the new timber weather for 4 or more months to let tannins leach out naturally then sand and prime etc., according to instructions. Get rid of the painted ends by sanding back to bare timber. For extra protection I used Cetol Filter 7 as an extra final coat. Our hardwood treads split a little. Use a black Sikaflex Pro plus or anothet brand of Mastik. Wipe off with turps for a great finish.
How often should I recoat a deck?from productreview.com.au
Depends if your deck is fully exposed to sun. If in Qld, recoat every 6 months for either product. I've used Sikkens as a 2-part oil based product but used it extensively on Merbau decking. There is a customer call line for Sikkens.
How long between coats of a deck?from productreview.com.au
Garry...no, no undercoat needed, if you are using on a deck, 3 coats, 24 hours between coats
What is the number to call Sikkens?from productreview.com.au
Hi Atia - if you're still needing help feel free to call us at Sikkens on 1300 745 536 and we'll help you through the process.
How long does tackiness last in Brisbane?from productreview.com.au
The tackiness will last longer if you are in a humid climate like Brisbane. Do not reapply if still tacky. In Brisbane we wait until until humidity is below 60% so around April/May. If you live in a dry climate then 2 to 5 days should be enough for coats to harden.
Can you use Sikkens on feast?from productreview.com.au
If you want to apply a Sikkens colour over the Feast Watson oil you will need to remove that coating first. Sikkens Hsle walnut must be applied on bare timber so it will soak in. Let it dry then apply 2 coats of Sikkens decking oil for a good finish.
What is cetol dek?from cetolstains.com
Cetol DEK Finish is a high performance, translucent satin finish for exterior decks. This alkyd high solids formulation offers optimum protection, ultimate durability and a beautiful furniture-like appearance with the simplicity of a one product, two coat application.
Can Sikkens stain be shipped to California?from srdstain.com
Sikkens Srd stain can not be shipped to California. Please order Sikkens Srd RE. Sikkens Srd RE is not permitted for use and Can NOT be shipped in the South Coast Air Quality Managment District (SCAQMD) which includes all or part of the following counties of California: Los Angeles. Orange.
What is the best way to clean a wood deck?
A pressure washer is ideal for cleaning hardwood decks such as ironbark, Merbau and blackbutt (pressure washers are not recommended for use on softwood). Otherwise, a good hard-bristle brush works well to remove stubborn dirt and grime.
Can you use pressure washers on treated pine?
While pressure washers are ideal for use on hardwood decks, they should not be used on softwoods such as treated pine or western red cedar. The high-pressure jet stream can leave impressions in the soft timber. Do not use steel wool to scrub timber decks.
