Can Thompson water seal be used on hardwood floors?
I'm not here to rip into Thompson's water seal, it serves a purpose for fences and decks, and is inexpensive, but it isn't an interior product for hardwood floors. If you want the official answer, you should always go directly to the manufacturer.
How do you use Thompson’s water sealer?
To apply Thompson’s water, sealer, you need to first wipe and clean the surface. If you are working on a deck or exterior wood surface, you are to wipe down the wood with deck stain cleaner. Then scuff the wood, remove dust and apply two thin coats of the Thompson’s water sealer within 24 hours.
How long do water seals last?
It provides protection against moisture and prevents rot, mildew, and rust. The product was designed in the 1930s by John D. Thompson for use in homes built with steel reinforcement beams. Thompson’s water seal review is that it has been around for nearly 100 years – which means you know it will last!
How long does it take Thompson’s water seal to dry?
It is possible to successfully apply Thompson’s Water Seal to damp wood. So, if the wood you want to seal is wet, just wait two to three hours. It should be dry enough to work with the sealant then. How often should you seal your deck?
Is Thompson Water Seal toxic?
Non-toxic, non-flammable, non-combustible.
Is Thompsons water Seal breathable?
Thompsons Water Seal, provides a clear long lasting waterproof seal, stops moisture, water or damp penetrating your exterior walls. Silicone micro emulsion is breathable and provides excellent protection for brick-work, aged concrete, render, slate, painting, terracotta and wood, exterior use only.
How long does Thompson's water Seal take to cure?
Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.
What can you use Thompsons water Seal on?
Proven to waterproof wood, concrete and brick. Use as a wood sealer, brick sealer, or for concrete waterproofing.
Why is my Thompson water Seal sticky?
If the weather is too cold, your Thompson water seal layer will just stay there and not dry as it should. Ideally, the sealant will dry best in temperatures above 50°F. If the thermometer units dip below this level during or soon after application, the deck may stay sticky for longer than 24 hours.
Is Thompson's water Seal oil based?
Thompson's® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration.
What's better than Thompson's water Seal?
According to them, these are the nine most effective wood sealers:Thompson's Water Seal. ... Rainguard Premium Wood Sealer. ... DEFY Crystal Clear Sealer. ... Anchorseal 2. ... Roxil Wood Protection Cream. ... Eco-Advance Exterior Wood Waterproofer. ... Ready Seal Stain and Sealer for Wood. ... Pure Tung Oil Natural Wood Sealer.
How many coats of Thompson Water Seal do I need?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water. Let the deck dry for at least 24 hours and you're ready to replace the furniture.
Does Thompson Water Seal peel?
Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.
Does Thompson water Seal prevent mold?
Wood Sealers | Thompson's® WaterSeal® Thompson's® WaterSeal® provides a range of opacity options and color choices to meet your particular needs. All Wood Sealers prevent water damage, while the coating resists mildew and UV damage.
When should I apply Thompson's water Seal?
Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure. All Thompson's WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck.
Does Thompson's water Seal have silicone in it?
Thompson's Water Seal uses a unique micro silicone emulsion to stop water penetration. Apply Water Seal directly onto damp surfaces to provide long lasting waterproof protection within hours.
What's better than Thompson's water Seal?
According to them, these are the nine most effective wood sealers:Thompson's Water Seal. ... Rainguard Premium Wood Sealer. ... DEFY Crystal Clear Sealer. ... Anchorseal 2. ... Roxil Wood Protection Cream. ... Eco-Advance Exterior Wood Waterproofer. ... Ready Seal Stain and Sealer for Wood. ... Pure Tung Oil Natural Wood Sealer.
Can you put Thompson's water Seal on damp wood?
Thompson's® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.
Does Thompson Water Seal smell?
Registered. I wouldnt use Thompson water seal, it has a strong smell that sticks around for along time!
Does Thompson Water Seal need two coats?
Apply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.
How long does it take for Thompson's water seal to dry?
It is possible to successfully apply Thompson’s Water Seal to damp wood. So, if the wood you want to seal is wet, just wait two to three hours. It should be dry enough to work with the sealant then.
How Can You Tell If The Paint Isn’t Compatible With Thompson’s Water Sealant?
With that said, a spot test will help you determine what might work best.
How Can You Tell If It’s Okay To Paint Over The Water Seal?
If you didn’t seal your deck recently, you might be good with just adding primer and painting it. Most of the products from Thompson’s will stop protecting against water on four to six years. If you’re painting concrete, you usually can go for it after 45 days unless you applied Thompson’s Water Seal AdvancedClear. (You can’t paint over AdvancedClear!)
Why isn't my paint looking like Thompson's water seal?
Your paint may not look as intended because Thompson’s Water Seal has hydrophobic tendencies. Deciding to paint over a water-repelling treatment isn’t something you should do lightly. That’s why you should read this article before you pick up a paintbrush.
How to remove wet seal paint?
To fully remove Wet Seal, you need to sand down the area. This may take a while, but once you see the paint results, you will realize it’s totally worth it. Apply a couple of coats of primer. Make sure that the primer that you pick is congruent with the paint that you choose.
Can water seal paint run?
According to Thompson’s website, the answer is a firm no. This is because the water seal may not adhere properly to the paint or may cause the paint to run .
Can you use Thompson's Water Seal on wood?
If you need to have wood waterproofed, then chances are you’ve applied Thompson’s Water Seal to it. This waterproofing stain is known for being one of the best in the home improvement world when it comes to keeping your materials looking great. Of course, many of us want to make our projects look even better with a fresh coat of paint. But, is this actually doable?
mdillwilson
Ive always been curious, but can you use Thompsons Water Seal on Wood Floors, after staining with oil base. Reason Im asking is my little dogs keeps using a spot in the room and I don't want my floors ruined. Thanks, Mary
Tom King
Train the dog. We raise small dogs. Right now, we have a litter of four 9 week olds that are loose in the house when we are sitting in the evenihgs. They run into the puppy room to use litter boxes, and have had no "accidents" in the house. They have never had the freedom of more space than they can be successful in.
drzaius
OK, I will then. It's an almost completely useless product. I bought it & tried it on many outdoor items. When applied heavily enough to provide protection, it's a sticky mess (& the protection is very short lived), or apply it lightly & you have no protection. This is one product that never should have seen the light of day. End rant.
mdillwilson
Thanks guys for responding. I have trained and had dogs all my life and even trained in 4 H in Oregon. Usually really big dogs. The one I have now is a small dog. I read her particular breed can be hard to potty train. Plus I'm on disability and hard time walking. Need a new hip.
Unknown craftsman
Marine or spar varnish will take a long time to dry. And you might feel like your living inside a giant can of varnish because of the smell.
wdwerker
Marine and spar varnishes are softer so they can survive in the elements. If the finish was hard out in the weather it would crack. There are so many durable floor finishes today. Lots of them are waterbourne and dry quickly with little smell.
mdillwilson
Marine or spar varnish will take a long time to dry. And you might feel like your living inside a giant can of varnish because of the smell.
