Reasons To Not Use White Lithium Grease On Plastic
- 1. Causes Deterioration Of Plastic When using grease for plastic gears, you will not want to use white lithium grease. It comes down to the deterioration of the surface. ...
- 2. Ruins The Surface When it comes to white lithium grease uses, you are going to wonder whether or not plastic is a good fit. It is not. ...
- 3. Inefficient Performance
Is white lithium grease good for plastic gears?
Is white lithium grease good for plastic gears? That's a very good question! It can be used upon assembly of a part to prevent wear. It can help to prevent heat buildup. If moisture can get to parts, it can prevent parts from getting rusty. Plastic distributor gears could use that as a start-up lubrication until oil gets to the part.
Is white lithium grease water-resistant?
White Lithium Grease is also water-resistant, highly tolerant to extreme pressures, and boasts a working temperature range that extends from –25Cº right up to 130Cº. On that note, White Lithium Grease is ideal for long-term lubrication, vertical applications, and where the prevention of water ingress is a requirement.
What is the difference between grease and lithium grease?
In most cases, grease is merely oil that has had a thickener (additive) added to it. In the case of White Lithium Grease, the lithium itself is the thicker.
How does lithium-ion lubrication work?
However, the lithium doesn’t only provide structure to the oil (thereby holding it in place in vertical applications), it also acts as a type of slow-release sponge that applies oil (in small amounts) as per the component’s lubrication needs.
What grease is safe on plastic?
Lubricants based on silicone, perfluorinated PFAE, mineral oils, and synthetic hydrocarbons (SHC or PAO), typically work well with plastics. Esters and polyglycols are generally not compatible with plastic, although there are exceptions based on the type of plastic material.
Is permatex white lithium grease safe on plastic?
Permatex White Lithium Grease is an all-purpose white lubricant for metal-to-metal and metal-to-plastic applications.
What can I use white lithium grease on?
White lithium grease can be used to: Lubricate car door hinges. Lubricate sunroof sliding panels....WD-40 High-Performance White Lithium Grease lubricant is also great to apply to home uses such as lubricating:Garden tools.Cables and chains.Water pumps.Latches and hinges.Tow bars for trailers/caravans.
What type of grease is used on plastic gears?
Typically, lubricants based on silicone, PFAE (perflourinated), most synthetic hydrocarbons (SHC or PAO), or mineral oils work well with plastics.
Which is better silicone or lithium grease?
As mentioned above, and unlike lithium grease, silicone lubricant is the perfect lubricant for rubber surfaces, but it is also extremely versatile, so it can be used on most other materials, including metal, plastic, wood, and even painted materials.
Can I use lithium grease on plastic gears?
The answer is: yes, it is by far the best lubricant for nylon gears. No, it will not do anything bad to your gears. White lithium grease works perfectly with nylon gears. People have been using it for lubricating RC servo gears for forever.
Where should you not use lithium grease?
Lithium-based lubricants are used in cars and machinery in general. It's not advisable to use them on plastic parts. As lithium is based on petroleum, it tends to speed up rubber and plastic components decay.
What is the difference between lithium grease and white lithium grease?
"White Lithium" Grease has fewer additives, that's the only difference other than visibility. The "Lithium" is just the thickening agent. The base oil is typically Mineral Oil, which is relatively low concentration, but I prefer to avoid using mineral oil around O-Rings.
Does white lithium grease wash off?
Sprays on easily - sets up as a lubricating grease that will not melt, run, wash off or freeze. Inhibits corrosion. For auto, home, marine, RV, farm and shop.
Is grease bad for plastic?
It is true that some lubricants (both mineral and synthetic based) can cause plastics and elastomers to swell or crack over time. The swelling, cracking and even discolouration are not instant and can take many hours of exposure to the grease for the damage to occur.
Can you use WD-40 on plastic?
WD-40 can be used on just about everything. It is safe for metal, rubber, wood and plastic. WD-40 can be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40.
Is silicone grease good for plastic?
In lubricants, a silicone base oil is commonly used in greases for plastic gears, control cables, and seals because they are inert, compatible with most plastics and elastomers, and remain stable over a wide temperature range.
Is dielectric grease safe on plastic?
Since dielectric grease is a silicone grease, it should not be used on silicone-based rubbers or plastics, as it will break them down over time. The grease does not conduct electricity, so it shouldn't be applied directly to the mating surfaces (pins and sockets) of an electrical connection.
Can you use silicone grease on plastic?
In lubricants, a silicone base oil is commonly used in greases for plastic gears, control cables, and seals because they are inert, compatible with most plastics and elastomers, and remain stable over a wide temperature range.
Can I use WD 40 on plastic gears?
WD40's low viscosity, cleaning, and degreasing composition will inevitably cause deep penetration to plastic. Although it may also be used to clean surfaces covered with dirt, grease, and even grime, WD40 will leave excess oil streaks on plastic which can be difficult to remove.
Is white lithium grease safe on paint?
WHITE KNIGHT™ is a heavy-duty white lithium grease that lubricates and protects against corrosion. Non-staining formula is water resistant and safe on paints and plastics.
What is the difference between lithium grease and white lithium grease?
What Is the Difference Between Lithium Grease and White Lithium Grease? The difference between the two types of grease is the ingredients used to make the grease. White lithium grease has zinc oxide added to the formulation. It’s meant for use in moderate load applications.
Does grease break down plastic?
High-viscosity oils, generally ISO VG 100 or more, are less apt to penetrate and adversely affect plastic materials. For greases, an NLGI 1 or 0 consistency reduces friction and grease-induced noise (grease slap). Aging resistance. As lubricants age, they are more likely to attack plastic.
Is white lithium grease silicone based?
Because lithium grease is petroleum based, it’s not recommended for use around plastics and rubber where it’ll cause these to prematurely fail. These applications are better served by silicone grease.
Is lithium grease safe on rubber?
It performs excellently on rubber, but it is also very effective on surfaces made from plastic, metal, wood, and other materials. It also helps to prevent surfaces from rust and corrosion because its waterproofing formula repels moisture from surfaces.
Does white lithium grease harm rubber?
Lithium-based lubricants are used in cars and machinery in general. It’s not advisable to use them on plastic parts. As lithium is based on petroleum, it tends to speed up rubber and plastic components decay.
Can you lubricate plastic gears?
Most plastic gears are capable of running without lubrication or can be embedded with lubricating materials (such as graphite, silicone, or PTFE). However, some operating conditions benefit from, or even require, lubrication.
Is White lithium grease good for gears?
Yes, but it’s not a good idea. Even applied sparingly, it will pick up way too much dirt and make a mess. If you oil or otherwise try to lubricate the chain later on, all this dirt will flow inside the bearings and cause the chain to wear out prematurely.
What are the advantages of polycarbonate?
PC (polycarbonate) has the advantages of excellent impact resistance, weatherability, high hardness, small shrinkage and size stability. However, the self-wetting, chemical and fatigue properties of polycarbonate are poor. This material is colorless and transparent, easy to colour and beautiful plastic parts. It is still widely used in precision gear transmission of instruments and instruments and process decorations.
What is ABS plastic used for?
But it is also used in the field of low-grade sports transmission gears such as toys.
Can you use grease on a speedometer?
Yes it is. Many repair manuals actually recommends this in paste form for the plastic gears in the speedometer assembly. It is not as thick as regular grease so it should not contribute to additional wear
Is white lithium a grease?
Yes. Greases are made of a base fluid, thickener, and additives. White lithium uses a lithium thicker, or soap, to use the older term. The base oil is typically mineral oil in a white lithium. Additives are usually a corrosion inhibitor, and other properties that the manufacturer wants to use.
Can you put lithium grease on a sewing machine?
Nooooo but put very lightly some sewing machine oil on the them that will be fine…. That lithium grease will mess it up… That's made for more of heavy duty things
Is white grease good for wheel bearings?
If moisture can get to parts, it can prevent parts from getting rusty. Plastic distributor gears could use that as a start-up lubrication until oil gets to the part. White grease is used on electrical connectors and bulb sockets where water gets in and can short parts. But, it's not good for wheel bearings. Dielectric grease is good for electrical sockets. It's like Vasoline.
Can plastic crack?
Generally yes, but some plastics can har den and crack over time partly because the wrong grease base was used, and ‘lithium’ greases come with various bases.
Is lithium grease safe to use on plastic?
White lithium grease demonstrates excellent adhesion to metal and is perfect for lubricating metal on metal surfaces. … It performs excellently on rubber, but it is also very effective on surfaces made from plastic, metal, wood, and other materials.
What kind of grease is safe for plastic?
Lubricants based on silicone, perfluorinated PFAE, mineral oils, and synthetic hydrocarbons (SHC or PAO), typically work well with plastics.
What is the best lubricant for plastic on plastic?
Lubricants with silicone or PTFE (polytetrafluoroethylene) are best for use on plastic surfaces. PTFE is hydrophobic, meaning it repels water, so lubricants containing it are effective in damp conditions. Silicone lubricants make surfaces ultra-slippery while repelling water.
Can I use white lithium grease on plastic gears?
Question: Is this safe on garage door opener’s plastic gear? Answer: Yes, should work fine.
What grease is good for plastic gears?
The best grease for plastic gears is generally white high-temperature grease or high-viscosity silicone grease.
What is the difference between lithium grease and white lithium grease?
What Is the Difference Between Lithium Grease and White Lithium Grease? The difference between the two types of grease is the ingredients used to make the grease. White lithium grease has zinc oxide added to the formulation. It’s meant for use in moderate load applications.
Where do you use lithium grease?
White lithium grease can be used to: Lubricate car door hinges. Lubricate sunroof sliding panels. Protect components from water ingress. The WD-40 Specialist High-Performance White Lithium Grease can be used for trade applications such as lubricating:
What is the temperature of white lithium grease?
White Lithium Grease is also water-resistant, highly tolerant to extreme pressures, and boasts a working temperature range that extends from –25Cº right up to 130Cº. On that note, White Lithium Grease is ideal for long-term lubrication, vertical applications, and where the prevention of water ingress is a requirement.
Is grease the same as oil?
As most mechanics know, oil and grease are essentially the same thing, perform ing the same essential purpose : Keep metal-on-metal surfaces lubricated. However, the two solutions differ in how they achieve this…. Grease is typically better than oil in vertical applications. Grease can serve as a contamination barrier against water and dust.
Is white lithium grease liquid or aerosol?
This brings us to CRC Industries’ White Lithium Grease, which offers many of the benefits associated with grease, but in a liquid / aerosol form. In many respects, it’s a super lubricant that combines the convenience of a liquid oil, with the performance benefits of a high-viscosity grease.
Does grease drip off?
Grease tends to stick around longer and won’t drip off. Grease has a wide operating temperature range. That said, grease has many benefits in certain applications, but there are some limitations, namely: Grease can be difficult (and messy) to apply in hard to reach places.
Is white lithium grease thicker than white lithium grease?
In most cases, grease is merely oil that has had a thickener (additive) added to it. In the case of White Lithium Grease, the lithium itself is the thicker. However, the lithium doesn’t only provide structure to the oil (thereby holding it in place in vertical applications), it also acts as a type of slow-release sponge that applies oil (in small amounts) as per the component’s lubrication needs.
What should you not use lithium grease on?
Lithium-based grease can withstand high temperatures and is ideal for cars, heavy machinery, and guns. It is not recommended to use them on plastic parts because lithium is based on petroleum and tends to speed up the decay of rubber and plastic components.
What do you use lithium grease for?
White lithium grease is a lubricant that typically comes in an aerosol form. It is a heavy-duty lubricant that is used for metal to metal applications. White lithium grease can be used to:
