You can do it on the rears without a spring compressor off the car, assuming your struts aren't sagging. The front depends on the strut and spring combination. But seriously, compressors are cheap, you can buy one for under 50 bucks, and use it whenever you want.
What is the no spring compressor method?
The No Spring Compressor Method is a way of disassembling your shock assembly (or coilover) without the use of a spring compressor tool. In your coilover/shock assembly, you have a spring that is compressed by a shock between the upper and lower perches, which are connected to the shock.
Do you need a spring compressor to take apart a shock?
However, if you need to take the shock and spring apart, then you’ll either need spring compressors or you can perform the No Spring Compressor Method.
How do you adjust the coil spring on a shock absorber?
Make sure the coil spring is rotated within the shock so that the top and bottom of the coil matches the top and bottom perches as shown below. Now, get the floor jack into position so that when it jacks up the lower control arm, it contacts the very end of the LCA.
What kind of tool do you use to compress a spring?
Handing off this work to a trained mechanic with a heavy duty tool such as this one, will offer the least risk for this type of work. The other spring compressor tool is a hand tool that uses hooks to hold the spring, while requiring you to ratchet down the hooks to compress the spring.
How do you compress a spring without a compressor?
0:203:21Cheap & Easy Spring Compressor - DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I just like to take a quick video to show you an amazing way to compress a spring with with justMoreAnd I just like to take a quick video to show you an amazing way to compress a spring with with just a ratchet strap you don't actually have a spring compressor.
How can I compress my struts at home?
1:578:56Compressing a Strut - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's the springs compressing safety first always make sure what you put your hands in this. Thing.MoreThat's the springs compressing safety first always make sure what you put your hands in this. Thing. You can really see here that it's already spinning. So that's a good point.
Can you change springs without spring compressor?
You can take the complete strut off intact but you can't dismantle to remove the spring without a spring compressor. Well you could hold the strut in a vice and undo the nut until the spring exits the workshop through the roof but then you would need to compress the new spring to refit.
Can you replace struts without replacing springs?
Do coil springs need to be changed when replacing the struts? The answer is no: if the spring is in a good shape, it can be re-used with the new strut.
Can you compress a strut by hand?
You cannot judge the strength or condition of a shock/strut by hand movement alone. The force and speed generated by a vehicle in operation exceeds what you can accomplish by hand. The fluid valves are calibrated to operate differently depending on the degree of movement inertia which cannot be duplicated by hand.
Do you have to compress struts?
The shocks and struts on many vehicles are integrated with springs that can pop off and injure you or damage your vehicle if not removed properly. In such cases, you'll need a spring compressor in order to take everything apart safely.
How do you compress springs on a strut?
3:4210:12How To Use A Spring Compressor To Change A Strut (And NOT Injure ...YouTubeStart of suggested clipEnd of suggested clipWe'll take the nut off the end of the strut. And the strut will come apart. So if you guys noticeMoreWe'll take the nut off the end of the strut. And the strut will come apart. So if you guys notice when i'm compressing the spring.
How do you replace strut springs?
0:071:02How to Remove and Replace Strut Springs the Easy Way - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse an impact wrench or ratchet to turn the center screw compressing. The place together andMoreUse an impact wrench or ratchet to turn the center screw compressing. The place together and collapsing the spring remove the strut and replace it with a new.
Can I fit lowering springs myself?
The process is not difficult, so anyone with garage access and a little know-how can accomplish this modification. Since lowering springs are designed to work with your existing factory suspension, they can simply replace your coil springs.
When replacing struts What else should be replaced?
Getting Your Shocks & Struts Replaced Shocks and struts should always be replaced in pairs (front axle or rear axle), and it's even better to replace the shocks/struts on all four wheels at one time. This helps maintain reliable handling and a consistent response on both sides of the vehicle.
Is it hard to replace struts?
The good news is, some repairs are easy to do at home. Like replacing shocks and struts. It's not a job that you should attempt if you're not familiar working with vehicles, but with a little training and experience, you'll be ready to tackle the job.
How long does it take to change struts?
around one to two hoursTypically, it takes around one to two hours to change struts, according to most professional mechanics. Even if you decide to replace them on your own, the estimated time is the same as long as you have previous mechanical skills and follow the process correctly.
How do you compress gas struts to fit?
0:333:44Gas Strut Liftgate Compression Prior to Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut a couple twists in it just to secure it so that it doesn't slip out of position. After youMorePut a couple twists in it just to secure it so that it doesn't slip out of position. After you compress the strut with the pipe clamp then bring the a pair of baling wires.
How do you compress a shock absorber?
0:131:12How to compress a gas shock absorber ! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd these adjustable ones you just push from the top down. And release the mechanism. And then it'llMoreAnd these adjustable ones you just push from the top down. And release the mechanism. And then it'll lock it in place good luck out there bye.
Are spring compressors safe?
Spring Compressor Safety Due to the force that the spring is under while compressed, misuse of a spring compressor can result in severe injury or death. Think blunt-force trauma to your eye, skull, chest, etc. from a fast-moving hunk of steel.
How do I lower the springs on my car?
0:462:30How To Cut Coil Springs | EATON Detroit Spring Featured ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can take the coil out of the car measure the height of the coil. You want to cut it about twoMoreYou can take the coil out of the car measure the height of the coil. You want to cut it about two inches just go around the coil here till you get about a 1 inch drop mark.
How far does a strut shoot?
The quick way is to put a foot on the spring, and take the nut off with an impact gun. Expect the strut to shoot across the ground at least 15-20 feet, so clear paths from pets or persons are good.
Can you do a strut in a car?
You can do this with the strut in the car and no safety risk to yourself. And yes, OP, what you're trying to do will work but you will have a very difficult time getting it done without an impact (strut shaft will spin).