How do I get rid of a box spring?
Most box springs have plastic pieces stapled onto the corners for added protection. Use a screwdriver to remove these pieces and set aside for recycling. Also, if your mattress has a dust cover, cut and tear it away to reveal the wood frame underneath. Use pliers to remove the staples holding the wood frame to the fabric around the bottom edges.
Do I need to replace my Box Spring?
Yes, you do. A traditional box spring unit has coiled springs inside it. After years of use, these coils break down, and can no longer give you and your mattress the support you deserve. A strong foundation is absolutely critical for your sleep so as soon as your box spring is showing signs of giving up, you should replace it.
How do you cut a box spring frame?
Saw for cutting the box spring frame. Boxes and/or bags to hold mattress parts. Find where the piping ends and use a seam ripper or utility knife to break the thread. Remove the cord by pulling it away from the mattress fabric.
How do you transport a box spring without a cover?
Slide your box spring into the bag and fold the opening over to seal it. Some places, like New York City, will fine anyone who leaves a mattress or box spring outside without covering it. Mattress bags can be purchased at furniture or moving supply stores for around $10 USD.
Can you cut a box spring and put it back together?
Introduction: Cutting and Folding a Box Spring If you don't mind performing a little surgery, you can fold the box spring in half, making it much easier to move around. After rebuilding it, the box spring will still have all the structural integrity and support that it started out with.
Can a box spring be reused?
Although the industry switched to using foundations approximately 20 years ago, the term “box spring” is still used quite frequently – which can be confusing. If your “box spring” is less than ten years old, it may actually be a foundation, which certainly can be reused provided it has no wear or damage.
How do you move a box spring?
3:106:14How to Move a Box Spring Up a Narrow Staircase - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull down on the side. Let's go lay right down. There we go wow tom this is like a buck thereMoreAnd pull down on the side. Let's go lay right down. There we go wow tom this is like a buck there you go. All right now we'll just tie it around with a cord. Great.
How do I reuse an old box spring?
15 Brilliant Ways to Repurpose Old Bed Springs {Trash to Treasure...Spring Vase.Vintage Bed Spring Wreath.Spring Jar Candle Holder.Mini Plant Holder.Photo Display.Recipe Holder.Birds' Nests.Candle Holder.More items...•
Can I put a new mattress on an old box spring?
You can, in fact, use an old box spring with a new mattress. However, doing so will be in violation of the mattresses' warranty. Keeping this in mind, some mattresses are recommended to be used without a box spring at all. There are also many different alternatives, these days, to using an old-fashioned box spring.
What is inside a box spring?
A box spring is a simple support consisting of a wooden/metal frame, filled with metal coils/springs or a metal grid, and wrapped in fabric. They are primarily used for innerspring mattresses. Typically box springs are designed to sit on top of a bed frame.
How do you move a full size box spring?
2:399:21How to transport a mattress safely on top of any car or suv - YouTubeYouTubeStart of suggested clipEnd of suggested clipBetter to let it lay over the back of the vehicle. And if you have an SUV with racks on top youMoreBetter to let it lay over the back of the vehicle. And if you have an SUV with racks on top you would lay that do the same thing lay it on top of the racks of the SUV. Okay.
Can you fold a spring mattress in half?
Thicker foam mattresses can be folded or rolled. Innerspring and pocket spring mattresses should never be folded in half.
Why is there fabric on bottom of box spring?
Protect and extend the life of your bed with a new Dust Cover underneath your bed. It will help protect the interior on your box spring or foundation from dust, insects and even a small pet that may be looking for a cozy place to hide or sleep.
What can I use instead of a box spring for DIY?
What to Use Instead of Box Springs? (Top 9 Alternatives)Platform Bed.Under Mattress Slats.Wood Slat Foundation.Hybrid Mattress.Innerspring Mattress.Memory Foam.Adjustable Bed.
When should I replace my box spring?
Boxsprings act as support systems for your bed. They should be replaced every eight to 10 years on average, which is slightly longer than the recommended eight-year lifespan of mattresses. However, major defects like sagging or broken slats mean it's time to buy a new foundation sooner.
What do you do with a queen box spring?
Drop the box spring off at a landfill if you can transport it yourself. Contact your local landfill or waste site to see if you can get rid of your box spring there. Bring the box spring to the location and throw it away if it's allowed. Many landfills will have a fee for disposal, usually around $30 USD.
How often should box springs be replaced?
Replacing Boxsprings Boxsprings act as support systems for your bed. They should be replaced every eight to 10 years on average, which is slightly longer than the recommended eight-year lifespan of mattresses. However, major defects like sagging or broken slats mean it's time to buy a new foundation sooner.
How do you know if you need a new box spring?
Four Signs Your Box Spring Is Worn OutIt makes a creaking or squeaking noise when weight or pressure is put on it.If you can see any sagging or bowing anywhere across the platform.If you can see any bending or damage to the steel grid.If the steel springs are more than 10 years old they're probably starting to wear out.
How long does box springs last?
10 yearsA high-quality box spring or foundation could last up to 10 years while a low-quality option could give out in less than five years. That's why it's important to prioritize craftsmanship when it comes to your mattress foundation.
How to remove a cord from a mattress?
Step 1: Cut and Pull the Cord From the Mattress Edges. Find where the piping ends and use a seam ripper or utility knife to break the thread. Remove the cord by pulling it away from the mattress fabric. Repeat the same process on the other side of the mattress. Set the fabric strands aside to reuse or donate.
What happens when you pull back a fabric?
When you pull back the fabric, you’ll reveal a layer of fluffy padding or foam. As you pull, watch out for staples binding the outside fabric. Snip the staples away until the top layer is completely free.
How to break down a mattress?
PRO TIP: Before you begin tearing apart your mattress, we suggest gearing up with a pair of cut-resistant gloves and protective eyewear to keep loose particles from getting in your eyes . If you have the space available, take the mattress outside to avoid a mess in your home.
Can you reuse wood box springs?
You can reuse these wood pieces for small garden projects or throw them in the compost pile, if you happen to have one. PRO TIP: Some box springs have metal parts in addition to the wood frame. Like the bedsprings, you’ll need to cut this chunk of metal into smaller pieces before you take it to a recycling center.
Can You Take Apart A Box Spring?
Yes. You can take apart a box spring using the right tools and a proper process.
The Disassembling Process
Like any DIY process, destroying a box spring requires ample time, space, and patience from a safety perspective.
How To Get Rid Of A Box Spring For Free
You can always opt to get rid of your box spring mattress differently. Here are the other options available to do away with that old box spring lying around.
How to remove staples from a box spring?
Step 1: Remove the Staples on the Long Sides. Using the flathead screwdriver and pliers, remove all the staples from the underside of the box spring, along the long sides. Don 't remove the staples on the short ends. Chances are, the fabric dustcover on the bottom is attached with a different, redundant set of staples from the top fabric.
How to make a box spring?
Using a doorframe or other straight fulcrum, carefully bend the box spring in half along the exact middle of the top side. Guide the top fabric to slip off the corners of the wooden frame. Once the thick steel wire is partially bent, move it against a wall and fold it the rest of the way. This is a good job for two people, to keep it from springing back and hitting someone.#N#Have one person hold the box spring while the second person ties it shut with rope or twine. Now you should have a nice, compact package that is easy to transport up stairs, around corners, in the back of a vehicle, etc.#N#Don't leave it in this state for too long, though. It's possible that the wire would lose its springiness and be warped upon reconstruction.
How to flatten wire?
Stand along the bend in the wire to flatten it out as much as possible. Cut four pieces of wood long enough to span between the middle four crossbeams. Fasten them to the crossbeams with the wood screws, adjacent to the cut rails.
How to make a box spring flexible?
Find the center of the box spring, and cut the dust cover with your scissors or knife. Tuck each half of the dust cover into the springs on either end to get it out of the way. Moving the top fabric out of the way, saw through the wood frame on each side. Your box spring is finally flexible!
Can you fold a box spring?
If you don't mind performing a little surgery, you can fold the box spring in half, making it much easier to move around. After rebuilding it, the box spring will still have all the structural integrity and support that it started out with. Here's what you'll need: flathead screwdriver. Pliers.
How to remove a box spring from a wood frame?
2. Run your blade around the edges to remove the sides of box spring. Start your blade on the outside of the wood frame on the short sides of the box spring. Cut through the fabric and pull it off the sides . Remove the fabric from every side of the box to expose the metal springs.
How to get a box spring off the curb?
1. Call your city waste department to see if you can put the box spring on the curb. Many cities have a large or bulky item collection period. Contact your local waste management either over the phone or through their website to check if and when they collect bulk items.
How much does it cost to dispose of a box spring?
Bring the box spring to the location and throw it away if it's allowed. Many landfills will have a fee for disposal, usually around $30 USD. Some landfills have limits of how many box springs you can throw away per year.
When to put out box springs?
Put the box spring out the night before your scheduled pick-up or in the early morning. Some private waste companies will also pick up and get rid of box springs for a fee. If your city has a bulk collection period, you don't need to schedule an appointment during that time.
Can you reuse a box spring?
Many components inside a box spring can be reused for different purposes, such as melting the steel to make new parts and chi pping the wood to use as animal bedding. [5] If your box spring is in good condition, check for organizations near you where you can donate it.
Can you throw away a broken box spring?
Throw away the components of the box spring. The components of your broken-down box spring (besides the metal springs) can fit in a large garbage bin if you want to throw the pieces away. Otherwise, contact your local waste department to see how you can properly throw away the larger pieces.
How to repair a box spring?
Lay a piece of cambric over your box spring big enough to cover the entire box spring with at least 4 inches of overlap on all sides. Repair cloth on either the top or the bottom of your box spring with cambric fabric. Wherever the repair is necessary, cover that entire side.
How to tell if box springs are worn?
Over time, the abuse that box springs receive begins to show. One of the most common signs of wear is in the cloth that covers the interior and exterior. Most often the material used is cambric, a light fabric used in many upholstery applications. If your box spring material is damaged, repair it by removing the old cloth ...
How to staple cambric?
Begin by stapling the cambric to the middle of each side, working opposite sides in succession and pulling the cambric tight before stapling. After you have the middle of each side stapled down, begin working towards the corners. Always pull the cambric tight before you staple and change sides frequently.
How to save money on a box spring?
Save money by repairing your box spring instead of buying a new one. A box spring provides necessary support for your mattress. It is often used for several years, even through new mattresses and mattress pads. Over time, the abuse that box springs receive begins to show. One of the most common signs of wear is in the cloth ...
Can you use cambric staple gun on cotton sheets?
It is helpful to have a second person to help pull the cambric tight as you staple. Although cambric is used in most applications, just about any cloth will work. Old cotton sheets are a popular alternative. Always be careful when using a high-powered staple gun.
What does it mean when a box spring is saggy?
If you've got an old, tired box spring, it could be interfering with your slumber, no matter what mattress you are using. Saggy box spring = saggy mattress. You've got lots of box spring replacement options, I'll take you through all of them along with some recommendations that are popular with my readers.
What is a saggy box spring?
If you’ve got an old, tired box spring, it could be interfering with your slumber, no matter what mattress you are using. Saggy box spring = saggy mattress.
What is adjustable base?
Adjustable Base. Adjustable bases are gaining popularity, and more and more mattress manufacturers are making them, or offering bundles with their mattresses. You might have thought of these bases being the domain of “hospital beds”, but they’re actually amazingly comfortable for anyone to use.
What is a box spring made of?
Instead, they are usually made of a wooden framework which is then covered in cloth. This gives the look of a traditional box spring, but with a much stronger core inside it. If you’re looking to buy a high quality new box spring, US Box Spring make some really sturdy ones.
Can I buy a box spring?
Can I Buy Just A Box Spring? Yes, you can. If you’re happy with your mattress and you like to have it on a box spring, simply replacing the box spring only is a great idea. However, box springs might be looking a little different than when you last bought one.
Do box springs break down?
Yes, you do. A traditional box spring unit has coiled springs inside it. After years of use, these coils break down, and can no longer give you and your mattress the support you deserve. A strong foundation is absolutely critical for your sleep so as soon as your box spring is showing signs of giving up, you should replace it.
