How to set a long lasting fence post without concrete?
- For depth, shoot for 25-30% of the above-ground length of post so 2 feet buried for a 7 foot post (5 feet exposed).
- Add 4 additional inches to this depth. So for a 7 foot post to be buried 2 feet, dig a 28 inch deep hole
- Dig twice the diameter of the post.
Is it difficult to install a chain link fence?
Setting up and installing a chain link fence isn't as difficult as you might think. Growing up in the country, my family kept us roaming children in with a chain link fence. It may not have been as pretty as some of the more decorative ones out there, but it was simple and effective.
How to remove chain link fence poles and remove concrete?
The 5 Steps Of Chain Link Fence Removal
- Step One – See If Someone Else Will Do It For You First! ...
- Step Two – Separate chain link grid from posts. There should be several narrow wire loops called fence ties that secure the chain link to the top of the fence ...
- Step Three – Gather the chain link grid. ...
- Step Four – Remove the top rail. ...
- Step Five – Remove the posts. ...
What do I need to install a chain link fence?
whether you use concrete or not, installing a chain link fence yourself requires several tools and materials, including fence posts, gates, chain link mesh, fasteners, tension bars and wires, post-hole digger, power auger, hacksaw or pipe cutter, shovel, line level, mason’s line, plumb bob, rubber mallet, socket wrenches, pull bar, fence puller, …
How deep should a chain link fence be?
What is better for buried fence posts?
How deep should a fence hole be?
How to set posts in polymer backfill?
What is the best soil for a fence?
Do you need gravel for a fence post?
Can you backfill a hole in a fence?
See 4 more
About this website
Can you install a fence without concrete?
There are a few options for materials to set your fence posts if you aren't using cement. These include dirt, gravel, sand, and crushed rock. Dirt: Filling the hole with dirt and compacting it will help to support the fence post.
How can I secure my fence posts without cement?
1:045:15How to Set a Secure Gate Post WITHOUT Concrete! - YouTubeYouTubeStart of suggested clipEnd of suggested clipHe said that this method of securing a gate post without concrete was keying the post the key isMoreHe said that this method of securing a gate post without concrete was keying the post the key is this old treated. 2 by 6 the 2 by 6 is going to go perpendicular to the direction of the gate leaning.
Do I need concrete for metal fence posts?
“But don't you have to concrete the post?” This is one of the most common questions we get asked. The answer is “NO” a driven post is as strong or stronger than a concreted post in almost all soil types except rolling sand.
Are fence posts always set in concrete?
Setting a fence post in concrete is the best way to make sure your fence stands tall. Many people wonder if their fence posts should be set in concrete, and the answer is always yes. Whether you are going the DIY route or having a professional company install them, fence posts should always be set in concrete.
Can you set fence posts in gravel?
To help slow such deterioration, add pea gravel or crushed stone to the bottom of the posthole. Once you have added gravel to a depth of three inches or so, use a piece of scrap lumber to tamp down the layer. Next, pour an additional three inches of gravel into the hole, tamping down a second time.
Can you build a fence without digging post holes?
If you don't want to dig to instal your fence post, a metal spike anchor may be the best alternative. Instead of digging a hole for the post, use a metal spike anchor( this is Amazon Link) to mark the location of the hole for your fence post.
Can you bury bottom of chain link fence?
The bottom of the fence with or without bottom rail should be installed no greater than 2″ above grade. Bury the chain link fabric – Burying the fabric 12″ or more will also eliminate the possibility of forcing the mesh up.
Do you have to put metal in concrete?
This strength is crucial for things like buildings, roads and driveways. Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.
How deep do chain link fence posts need to be?
As a general rule, Fencing Direct recommends at least a 24-inch footing depth for a 4-foot fence, plus an extra 3 inches for every foot of height (for example, 27 inches for a 5-foot post). The minimum hole diameter should measure four times the largest cross-section of the post.
Is 2 feet deep enough for fence posts?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you'll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone. For gateposts, you'll need concrete too.
Why do farmers put rocks on fence posts?
A somewhat unusual use for rocks is as weights to hold wooden or metal fence posts in place.
Is foam better than concrete for fence posts?
Concrete is more durable and can support load-bearing posts. Expanding foam works best for lightweight vinyl or mesh fences. Concrete takes longer to set and cure. Expanding foam is more expensive than concrete.
How do I anchor a post without digging it?
Installing A Post AnchorInstead of digging a hole for your fence post, use a metal spike anchor to secure the post.Insert the 1 foot section of 4×4 into the anchor. ... Pound the metal spike into the earth with a sledgehammer until just the top is sticking out of the ground.More items...
How do I make my fence post more secure?
There are two ways to secure fence posts in the ground - using fence post supports (also known as spikes) or setting with concrete. Fence posts supports are only suitable for firm ground and can be easier and quicker than setting concrete, though might not be as strong.
What should I use to secure a post in the ground?
1:073:19How to install a fence post in soft ground - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake off any of the loose. Soil around and you can place your posted. Where it's required. ThenMoreTake off any of the loose. Soil around and you can place your posted. Where it's required. Then place a double handed post rather over your post. And the weight of it. Start to hammer it. Down into
How do you hold a fence post in place?
1:244:44How to Set a Fence Post. FAST! - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore I concrete that post in I like to get it nice and straight nice and plumb in both directions.MoreBefore I concrete that post in I like to get it nice and straight nice and plumb in both directions. And I do that or using a couple whole sticks of timber. And a couple of clamps.
Does a 4 ft. chain link fence need concrete footings for the posts?
I am about to install a chain link fence between my deck and pool. My pool has a 4 inch slab of concrete and I have about 5" between the deck and the start of the concrete.
Home Improvement, Home Renovation, Tools, & Hardware - Homedepot.ca
Shop online at The Home Depot Canada for all of your home improvement needs. Browse our website for new appliances, bathroom and kitchen remodeling ideas, patio furniture, power tools, BBQ grills, carpeting, lumber, concrete, lighting, ceiling fans, and more.
How tall should a chain link fence be?
If your chain-link fence is above six feet tall, you will have to bury it deeper to ensure it doesn’t weaken faster. While you can use a shovel, this process is far more comfortable with a posthole digger. These are specifically for installing fences and other types of poles.
What to put on fence posts before placing poles?
Before placing these poles, try and put some polymer or gravel to secure the fence posts further. This material is your concrete substitute should something go wrong in the soil.
Can you put a chain link fence in concrete?
How To Install Chain Link Fence Without Concrete. If you want to install a chain-link fence, concrete is an easy way to ensure that your wall will stay there forever. However, you may want to avoid putting your fence in concrete, as it takes a great deal of time and money. It begs the question: do you need to use concrete to install ...
Can you pound chain link fence poles down?
Check with other people who have installed chain link fences in the area. You also may get a sign from looking at the soil when you dig it up. Also, you cannot pound these poles down, as you risk bending the tops. It is especially true in more rocky soils.
Can you tighten a chain link fence?
You want to be sure that the chain-link fence is taut as it gets the corner pieces. If it is not, you are going to need to tighten it further. If the chain-link fence bends as you stretch it, you should be able to it until it’s the location it needs to be.
Do you need to adjust the height of the caps on a non-corner pole?
The caps you install on the non-corner areas should have loops on the top. You will siphon the top rail through those looped caps to ensure each pole secures them. You may need to adjust the height on the caps, but you will want to be sure they are all at the same level.
Can you install a chain link fence without concrete?
Before you consider installing a fence post without concrete, you need to check the dirt. You can’t install a chain-link fence without a secure location.
What type of soil do fence posts need?
Clay soil expands and contracts a lot between dry and rainy spells, this allows the posts to shift and settle differently. Concrete anchors are a must in clay soil.
Can you pound a post into the ground?
Never pound the posts into the ground, especially if you have hard clay or rocky soil, because you’ll bend the tops. The hole should be slightly bigger than the posts, so you can back fill it with dirt packed tightly around the post.
Can you anchor a fence with cement?
If you just need a temporary fence, concrete anchors aren’t really feasible. In all other cases, anchoring each post is the best way to prevent shifting and leaning for years. Some people suggest just using cement on the end, gate and corner posts, but this method can still allow a lot of movement, so you’ll end up resetting the unanchored posts in a few years anyway.
Can you anchor a post in clay?
Concrete anchors are a must in clay soil. If you have particularly sandy soil, you may be successful without concrete. You will want to use a polymer backfill to improve stability and drainage around the post.
Can you use concrete for chain link fence posts?
Do you Have to Use Concrete for Chain Link Fence Posts? You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
How deep should a chain link fence be?
If you decide to move forward without concrete, use a post-hole digger to make holes for your fence posts. The holes should be at least 2 feet deep , or a third of the height of the fence.
What is better for buried fence posts?
Sandier soil may be better for buried fence posts that are not held in place by concrete. Advertisement. Opting away from concrete can save you money on materials and rental of applicable tools. However, you may need to purchase backfill to properly fill in the area around the fence posts in their holes. Regardless of the backfill you choose ...
How deep should a fence hole be?
The holes should be at least 2 feet deep, or a third of the height of the fence. Gently insert the fence posts into the holes, but don't pound them as this can lead to bending. Use backfill to fill in the hole, keeping the posts firmly in place. Advertisement.
How to set posts in polymer backfill?
To set posts in this sort of polymer backfill, dig a hole twice the size of your post's width. The depth of the hole should be at least a third of the length of the post.
What is the best soil for a fence?
Soil that is heavy in clay tends to expand and contract a great deal as moisture changes, which can mean your fence posts will move and shift over time. Sandier soil may be better for buried fence posts that are not held in place by ...
Do you need gravel for a fence post?
When using this sort of material, you will not need gravel or other water drainage material. If you are in an area that experiences frost heave, you can use these products in combination with a post hole shaped like a bell to prevent seasonal shifting of your fence posts.
Can you backfill a hole in a fence?
Backfill Options. To backfill the holes for your fence posts, you can use a variety of materials. For clay-type soil, gravel is deal, but won't work as well for backfill in loose or sandy soil. This is because it permits water drainage around the posts.
