Can slate floors be laid straight over slate?
Some Slate floors are perfectly okay to have this material laid straight over it and require no real preparation. Again I always ask for my manufacturer and installer guarantee for every job.
Should slate tiles be removed before or after flooring?
As others have already suggested here, the ideal preparation would be to remove the slate tiles first and then make sure the level complies with the above.
Can you grind slate flooring?
Unfortunately, this is not possible with slate; grinding the surface of slate permanently alters the stone's natural surface finish, creating an ugly, chalk-like consistency that doesn't match the rest of the stone or adjoining pieces. In this manner, how do you remove slate flooring? Remove all furniture and other items from the slate floor.
How do you cover a slate floor with underlayment?
Pry the trim off the walls around the edge of the slate floor, using your pry bar and hammer. Keep the trim intact as you remove it. Set it aside. Lay plastic underlayment over the surface of the slate in slightly overlapping courses. Cover the whole floor.
Can you tile on top of slate?
Slate is generally considered one of the finer surfaces for floors or walls, but maybe you've got a slate surface that's stained beyond repair, or you just don't like it. You can cover that surface with ceramic tile fairly easily, since slate provides the kind of strong, solid backing that ceramic needs.
What can I use to cover slate tiles?
You can now cover the slate with Kerlite. This is a 3mm porcelain cladding. Comes in many different colours including wood grain. I have used it on several walls and even outside wall and doors.
Can you put vinyl over slate?
Can vinyl be laid over slate? Yes, says George, but just like tile, you will have to screed on top of the slate. “Most likely, you'd have to grind back the slate to make it more level, then do primer and a good self-leveller, and you might even have to grind a little over the top of that as well,” he says.
Can you lay laminate over slate?
The short answer is yes, you can put laminate flooring over tile.
Can you change the color of a slate floor?
Using a medium-size paintbrush, apply a thin layer of paint over all slate tiles to add color. Allow each layer of paint to dry completely to determine the final color. Slate tile is porous and will absorb the paint, so it might be necessary to add additional coats of paint to achieve the desired color.
How do you revamp slate tiles?
0:071:56How to enhance and protect slate floors - YouTubeYouTubeStart of suggested clipEnd of suggested clipCrom 'ln slate sealer is a solvent-based coating designed to enhance and restore the luster ofMoreCrom 'ln slate sealer is a solvent-based coating designed to enhance and restore the luster of natural slate slate sealer is suitable for use internally. And externally.
How do you remove slate flooring?
Here are few generic tips and the best ways to remove slate flooring:Grab a cold chisel and a three-pound sledgehammer. ... Be careful not to crack the adjoining tile. ... Next, hit the hammer on the center of tiles to break them. ... Use a broom to sweep the floor and empty the debris in a garbage bag.More items...•
Can I sand slate?
Grinding. Unfortunately, slate responds to grinding in a different manner than natural stones, such as travertine and granite. You can grind and sand the surface of most natural stones, then use different grit diamond sand papers to resurface the pieces back to their original sheen.
How do floating floors work?
The term "floating floor" refers to the construction of flooring material to lock together using a system similar to a puzzle piece where the material locks together creating a tight bond. With this tight bond, the floor is stable without any attachment to the sub-floor.
How many screeds do I need for slate flooring?
What is going to make the diffference is the screeding ( you ;; probably need at least 5 screeds. Another more expensive and messy way is to grind down the slate - use a self levelling concrete and go over the top ( then you can place whatever you like. If the slate flooring is meeting up to bedrooms etc then you need to lookj at that as well .
Can you cover slate floors?
hi there, yes you can cover slate floors depending on the finish of the floor in question. Slate floors vary depending on the finish and the quality of the slate. The majority of slate floors I have dealt with have come with two major factors to consider:
Do slate floors need concrete?
Some slate floors will still require a self leveling concrete after grind down - but again it depends on the variations in the floor.
How far apart should concrete floors be?
irregularities. When a straight edge 2 metres long is placed at rest at 2. points 2 metres apart, no part of the surface shall be more than 3mm. below the length of the straight edge.
Can you screed over slate?
Your plan to screed over your slate floor is ok providing the screed you use will stick well to it. This might be a problem if the slate is sealed with a polyurethane type finish. Any residue from detergent/floor cleaner/ wax polish etc would have to be completely cleaned off.
What is the real work of a floating floor?
The real work is the surface prep for the new flooring, as there was bits of mortar and glue left behind. A floating floor with underlay, and carpet were easy to do because they didn't need an absolute flat surface. Tiles would have been more work.
Do you need to sand Kerlite cladding?
Seriously you need to check out the Kerlite cladding. No need to sand, the variety is huge even wood look. All you need to do is put on a thicker screed. As I said you do need a tiler that has laid it before. Once it's down, it will never break. Google it, the range is amazing and really beautiful.
Types of Flooring You Can Install Over Ceramic Tile
There are several types of flooring you can install over ceramic tile, each with their own pros and cons. Your decision will depend on the room you need to install in and whether or not there are door jambs and fixtures to work around.
Ceramic Tile
It may sound counterintuitive to install ceramic tile over ceramic tile, but if your only gripe with the tile is its pattern design—not its feel—then this is a possibility. Before you begin, you’ll want to do a thorough inspection for any signs of mildew or discoloration.
Vinyl
Typically, higher quality vinyl flooring doesn’t require the use of an underlayment, so you’ll mostly keep your floor’s height the same. Keep in mind that sheet vinyl flooring or vinyl tile are thinner than vinyl plank flooring.
Laminate
Laminate flooring is inexpensive, very easy to install, and has a padding underneath that can mask any unevenness on the base layer of tile. It does not require any adhesive, making it easy to remove should you ever change your mind.
Engineered Wood
Solid wood is not a great option as it requires plywood sub-floor before installation, and that plus the thickness of the wood (3/4 of an inch) will more often than not make the flooring too thick. That said, engineered wood can be glued directly onto the tile, making installation easy, and it is much thinner than solid wood.
Carpet
Carpet is sold in a range of heights, so you can probably find a style that won’t interfere with your doors or other fixtures in the room. That said, it needs to be applied with epoxy that can stain your tiles, though you can opt to only fasten it in the corners, impacting as few tiles as possible.
When Do I Need to Remove Ceramic Tiles?
Certain circumstances may necessitate the need to completely remove your ceramic tiling. If several tiles are cracked or loose, it may be time to remove all the tiles so you can take a peek at the subfloor and see if any deeper issues are going on there.
