Procedure for Moving A Front Load Washer Without Shipping Bolts :
- Drain the Washer. It is a must for you to drain the front load washer completely before going to start the transportation process.
- Reinstall Shipping Bolts (Optional) In case you are going to move the front load washer without shipping bolts, then this step is optional.
- Fill the Drum With Blankets. ...
- Keep Washer on the Dolly. ...
Can you move a washing machine without transit bolts?
Can You Move a Washing Machine Without Transit Bolts? You can move a front load washer without shipping bolts, but it is strongly advised against by manufacturers. The shipping bolts on your front load washer are there to keep the machine safe during transit.
Where are the shipping bolts on a front load washing machine?
You can typically find shipping bolts in the back of the unit on a front load washing machine. There are usually 4 shipping bolts in place, but some manufacturers only install 2 shipping bolts. Not all washing machines have shipping bolts, and that includes top load washers which generally have none.
How do I move the front load washer?
The washer is a key part of making sure that movement is minimized while you move the front load washer. First insert the bottom left bolt, bottom right, then the top left and top right shipping bolts. Hold onto the plastic bolt covers so that you can reinstall them once you get to your destination. Step 3. Fill the Drum With Blankets
How do you fix a front load washing machine that won't drain?
If you do not have the necessary shipping bolts, you can purchase them through an appliance repair center. Unplug your front-load washing machine from the wall outlet. Pull the machine far enough away from the utility room wall to access the drain line and water hoses. Set the bucket behind the front load washer.
Do you need shipping bolts for washer?
0:051:23What are transit bolts? why are they there and what should I do with them?YouTubeStart of suggested clipEnd of suggested clipWashing-machine its drum will be held in place by four transit bolt these are put in place by theMoreWashing-machine its drum will be held in place by four transit bolt these are put in place by the manufacturer to keep the drum from moving during transport from the warehouse.
How do you secure a front load washer for moving?
Preventing a washing machine's drum from excessive motion during your move will protect the suspension from breaking. You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum.
Do front load washers have shipping bolts?
0:010:50Front Loading Washer Installation - Removing Shipping Bolts - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemoving your front loading washer shipping bolts is an easy and necessary step in proper applianceMoreRemoving your front loading washer shipping bolts is an easy and necessary step in proper appliance installation. All along with this video to learn how to remove your washer shipping bolts.
What happens if I use my washing machine without removing the transit bolts?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.
Do all washing machines have transit bolts?
Normally when you get your new washing machine there will be two (rare), three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine. These bolts "lock" the drum unit in place stopping it from moving.
Can you transport a new front load washer on its side?
When you move your washer, first replace the shipping bolts that were originally in the back of the washer. This keeps the drum from moving inside the washer and protects it from damage. Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it.
What happens if you don't remove shipping bolts from LG washer?
You need to remove the shipping bolts. If the four shipping bolts of your machine are still attached to the back of the washer, they will cause a loud noise and vibration during the operation of the machine; which can lead to a permanent damage of the washer.
Where are the shipping bolts on a LG front load washer?
0:171:11LG/Kenmore Front Load Washer Shipping Bolts #FAA31690703YouTubeStart of suggested clipEnd of suggested clipIf you plan to transport the washer to a new location. You will need to reinstall them you will needMoreIf you plan to transport the washer to a new location. You will need to reinstall them you will need two short bolts and two long ones your first step is to unsnap the cabinet plugs in the rear panel.
Where are the shipping bolts on a Samsung front load washing machine?
Your Samsung Front Load Washing Machine comes with shipping bolts inserted into the back of the machine to keep the tub secure during transportation.
How do you move a Samsung front load washer?
0:061:17Samsung Washer Shipping Bolt Replacement #DC97-14489AYouTubeStart of suggested clipEnd of suggested clipUse a 10 millimeter socket or the wrench provide it with the washer to tighten the bolt. You canMoreUse a 10 millimeter socket or the wrench provide it with the washer to tighten the bolt. You can secure the power cord under the retaining tab of each bolt.
Is it OK to lay a washer on its side?
It's recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.
How do you secure a washing machine in place?
Secure all loose parts: Tape the lid and other moveable compartments closed, tape the electrical cord to the unit to prevent tripping, and tape the owner's manual to the side of the washer for reference when it's time to hook the machine up at your new home.
How do I move my LG front load washer?
0:071:11LG/Kenmore Front Load Washer Shipping Bolts #FAA31690703YouTubeStart of suggested clipEnd of suggested clipIf you plan to transport the washer to a new location. You will need to reinstall them you will needMoreIf you plan to transport the washer to a new location. You will need to reinstall them you will need two short bolts and two long ones your first step is to unsnap the cabinet plugs in the rear panel.
How heavy is a front load washer?
Small-load washers can weigh as little as 99 pounds while extra-large washers can weigh up to 300 pounds....On average, washing machines weigh 170 pounds, and dryers weigh 124 pounds.TypeAverage Weight (pounds)Front-Loading washing machines205Standard dryers1243 more rows•5 days ago
Impact of Moving A Front Load Washer Without Shipping Bolts
In case you could not able to use the shipping bolts, then you have to ensure that there is no water present at the bottom of the tub.
Where Shipping Bolts Are Located?
Generally, you can find the shipping bolts at the back of the front load washer. Usually, there are around four shipping bolts are available, but some manufacturers install only two shipping bolts.
Procedure for Moving A Front Load Washer Without Shipping Bolts
Generally, moving a front load washer without shipping bolts mainly requires more attention and care.
Final Verdict
From the above mentioned scenario, now you have got a clear idea about moving a front load washer without shipping bolts.
Where do you put shipping bolts on a washer?
Insert the shipping bolts into the cabinet holes. If you have two sizes of shipping bolts, the shorter shipping bolts insert into the holes at the top of the washer and the longer shipping bolts insert into the bottom ones.
How to move a washer?
Load your washer into your shipping container, or a moving van if you are moving yourself. Make sure the washer is loaded before any other furniture or possessions, and place it at the front of the van or container. Cover it with a shipping blanket to avoid damage to the cabinet.
What to worry about when loading a front load washer?
The last thing to worry about is the condition of your front-load washer once you reach your destination. Taking a few extra minutes to prepare your washer for transportation will avoid costly repairs .
Where are the plugs on a front load washer?
The location of these plugs will be in each corner of the rear panel near the outside of the washtub.
Is moving stressful?
Moving can be stressful. You have to pack your entire home and arrange a means of transporting all of your belongings to your new location . Along with making sure you have everything packed, you have to remember all the little details, such as changing your address with the post office, shutting off utilities at your present location ...
How to tighten shipping bolts on washing machine?
Use a socket and wrench to tighten the bolts. Insert the longer bolts into the bottom holes and tighten them securely. Some brands of washing machines may have shipping bolts that are all the same length, and any shipping bolt can be used in any hole.
What is shipping bolt?
The shipping bolts keep the tub secure during a move and reduce the amount of vibration that could damage the suspension. If you do not have the necessary shipping bolts, you can purchase them through an appliance repair center.