How do I move my thermostat?
You can move your thermostat by following a few easy steps. After you’ve located the spot where you want to move your thermostat to, the first step is to turn off the thermostat power. It is always good practice to turn off the power supply when you work with electronics. Don’t touch or mess with any wires before the power has been cut.
Do you need an electrician to move a thermostat?
However, depending on how far from the current position you want to move the thermostat, you might sometimes need an electrician. If you’re just moving the thermostat to an adjacent wall or the other side of the wall the whole project will most probably take you less than an hour.
Where should a thermostat not be placed in a house?
Locations to Avoid When placing a thermostat, you need to avoid locating it near things that can cause falsely high or low readings—in other words, away from localized hot spots or cold spots. Windows and doors: Don’t place your thermostat near windows or doors that may let in drafts.
What happens to your thermostat when you leave the house outside?
Your thermostat will be affected by the fluctuation in temperature every time an exterior door is opened. This can cause your HVAC system to cut on and off unnecessarily. That’s inefficient, hard on the equipment, and leads to less stable temperatures in the home overall.
How to move thermostat without rewiring?
What to wear when moving thermostat?
What happens if your thermostat is faulty?
Can you move a thermostat to an adjacent wall?
Is it safe to use a thermostat in a room?
Can you repaint a thermostat wire?
See 1 more
How much does it cost to relocate a thermostat?
The average cost to move a thermostat is $135 to $450, depending on the distance. Drywall repair costs $75 to $150 to patch the old hole and cut a new one, while wiring installation runs $6 to $10 per foot. *Does not include cost of a new thermostat.
Can you move the location of your thermostat?
But in some cases you'll need to unplug your thermostat and move it further so it's closer to your router or Heat Link. If you want to move your thermostat to a more convenient spot that's OK, but it should stay in its new location long term, and make sure that you place it according to the following guidelines.
Where should your thermostat be located?
Ideally, you should place your thermostat in a room that you use frequently so your thermostat is reading accurate temperatures. You should also place your thermostat on an interior wall that is unobstructed by household items.
Can you move thermostat to other side of wall?
Fortunately, in many cases, it is possible to move a thermostat as a DIY task with just a few basic tools. If you only need to replace the interface or move your thermostat to the adjacent wall, the entire project may only require an hour or so.
Can a thermostat be behind a door?
For example, placing it behind a door or in a bookshelf can prevent proper signaling, making it difficult for your HVAC to produce sufficient cool or warm air. It is crucial to avoid placing your thermostat near a door or window. When doors and windows open, they let in cool drafts that can disrupt thermostat readings.
Can you extend thermostat wire?
If you have to, you can splice the thermostat wire and generally, if the splicing has been done correctly, the thermostat's function will not be affected. And as thermostats normally only need low-voltage power there are no safety regulations that prohibit the use of spliced thermostat wire.
Where should you not install a thermostat?
Locations to AvoidWindows and doors: Don't place your thermostat near windows or doors that may let in drafts. ... Exterior walls: Likewise, don't place your thermostat on an exterior wall. ... Supply vents: Placing a thermostat directly above or below a supply register can really confuse the system.More items...•
Should thermostat be in coldest room?
We would not advise putting the thermostat in the coldest room as this would not be a true reflection of the temperature of the rest of the house. You want an average reading for it to work efficiently so placing it in the coldest part of the house would be an extreme cold air temperature zone to avoid.
How many thermostats should a house have?
Most homes, including multi-story houses, have just one thermostat that controls the temperature throughout. If you own a multi-story home, you should have a thermostat on each floor to effectively control the temperature and save money.
Do I need an electrician to move a thermostat?
In most cases, moving a thermostat is a DIY job that can be done with a few basic tools. However, depending on how far from the current position you want to move the thermostat, you might sometimes need an electrician.
Should I move my thermostat?
But if your thermostat is in the wrong place, even those more expensive thermostats won't read the house's correct temperature. Relocating your thermostat to the right spot can save you money and make everyone experience the same temperatures no matter where they are in the home.
Where should I put my central heating thermostat?
The best place to position a central heating thermostat is on an interior wall, a comfortable distance from the likes of windows and doors, air vents and the kitchen or hallway.
Should I move my thermostat?
But if your thermostat is in the wrong place, even those more expensive thermostats won't read the house's correct temperature. Relocating your thermostat to the right spot can save you money and make everyone experience the same temperatures no matter where they are in the home.
Can I move my thermostat wirelessly?
0:115:05IS IT POSSIBLE TO MOVE YOUR THERMOSTAT? BEST ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipNo. Right and well there's a limited amount of wiring. But it's what you'll have is a thermostatMoreNo. Right and well there's a limited amount of wiring. But it's what you'll have is a thermostat that is connected via wi-fi.
Can you move a thermostat from upstairs to downstairs?
No, you will need to have the an HVAC tech come and install a thermostat both upstairs and downstairs. Most of the AC units have multistage and can do this with no problem.
Where should I put my central heating thermostat?
The best place to position a central heating thermostat is on an interior wall, a comfortable distance from the likes of windows and doors, air vents and the kitchen or hallway.
Wireless “transmitter” to relocate thermostat? - HVAC-Talk: Heating ...
Good evening. I have a Trane XL 824 that I love. However the builder of my home put the thermostat upstairs (in South Florida) and I would like to move it downstairs. However moving it would be a huge pain in the butt as I live in a two-story house. I could’ve swore that I saw something online or on Amazon, besides the Honeywell red dot system that would accomplish this: Looking for some ...
Moving a heating thermostat - how? | AVForums
Buy a wireless and you can mount it where you want. We have this one Honeywell CMT921 Room Thermostat | Screwfix.com its a good make and good model. A little expensive but worth the money imop Installing is very easy, The programmer is woreless and the control unit is wired into the boiler.
A Basic Guide to Moving Your Thermostat - Around the Clock
By Al Uchitel President Around the Clock Heating and Air Conditioning. As HVAC professionals, we are often asked about thermostats and whether it is possible to move them. There are many benefits associated with the correct thermostat placement, and it can dramatically help to improve the efficiency and performance of your system.
How to extend a thermostat wire coming out of the wall?
2 weeks. Keeps blowing 3A automotive fuse on electronic control board. I can read schematic on door panel. Fuse controls all low voltage devices.
Is there a wireless thermostat that will make relocating easier?
I've got a single zone which covers all three upstairs bedrooms in my home and the thermostat is located in the master bedroom. We prefer it to be somewhat cooler at night, but the baby in the nursery would be better off with a warmer room.
How to move a thermostat to another location?
Instead of simply swapping out the thermostat, you will need to locate the new back panel on the adjacent wall. This will require drilling holes in the adjoining wall to seat the back panel.
Why is it important to place a thermostat in a furnace?
Correct placement of a thermostat is crucial to achieving optimum efficiency and home comfort.
Why is it important to check the wires on my thermostat?
It is crucial to check that you connect the wires to the correct ports or there is a risk that the thermostat will not function properly. In the worst case scenario, failing to connect to the correct ports could cause the thermostat to fail. Moving the thermostat: When you are moving your thermostat to another location, ...
How to disconnect thermostat from HVAC?
Once you are confident that there is no power supplied to your HVAC system, you will need to remove the interface from the thermostat back panel. Slowly disconnect any cables, taking care not to dislodge any connections. Remove the back panel from its housing on the wall.
Can you move a thermostat?
Fortunately, in many cases , it is possible to move a thermostat as a DIY task with just a few basic tools. If you only need to replace the interface or move your thermostat to the adjacent wall, the entire project may only require an hour or so. Unfortunately, in some cases, if advanced wiring and thermostat installation are required, you will need assistance from an HVAC specialist. So, here we’ll present a basic guide to moving your thermostat, so you can determine if you can tackle this yourself or if you need to call in the experts.
Does a thermostat register heat?
This means that the thermostat will register the higher temperature, triggering cooling throughout the home in summer and switching off the heating in winter.
Does moving the thermostat increase the efficiency of the home?
In this type of scenario, moving the thermostat will not only boost your home comfort, but it can also improve the efficiency of your system , reducing your electricity bills during typically higher usage periods.
Where should a thermostat be located?
It is actually fine (and some say preferable) for the thermostat to be located near a return intake. For best results, you want the thermostat centrally located. This is a part of the home that you frequently use rather than tucked away in a hall. The thermostat should be positioned at a height of about 52-60 inches.
How to keep thermostat from letting in drafts?
Windows and doors: Don’t place your thermostat near windows or doors that may let in drafts. Your thermostat will be measuring the temperature of the outside air sneaking in. Instead of the overall indoor air temperature. Your thermostat will be affected by the fluctuation in temperature every time an exterior door is opened. This can cause your HVAC system to cut on and off unnecessarily. That’s inefficient, hard on the equipment, and leads to less stable temperatures in the home overall. It’s also important to make sure that your thermostat isn’t in direct sunlight coming through a window. If the sun is shining right on your thermostat, you could end up with a massive energy bill in the summertime.
What does it mean when you put your thermostat in the hallway?
Placing your thermostat in the hallway means that the hall will be comfortable. The rest of your house may not be.
Why is my thermostat turning on and off so often?
The temperature in those rooms tends to fluctuate a lot. It can cause your system to turn on and off too frequently. That’s not good for the lifespan of the equipment or your utility bills.
Why is the thermostat important in HVAC?
The thermostat needs to be placed so that it can get the most accurate reading of the home’s air temperature. Otherwise, it can lead to your HVAC system running ...
Why does my air conditioner run in summer?
Lamps and televisions both put out a fair bit of heat. If they’re very close to your thermostat, they can actually cause your air conditioning to run too much in the summer. Plumbing and supply ducts: Other sources of radiant heating or cooling that can throw off your thermostat are plumbing and supply ducts.
Can you put a thermostat directly above a supply register?
Supply vents: Placing a thermostat directly above or below a supply register can really confuse the system. That’s because the air blowing out of the vent will be significantly warmer or cooler than the overall temperature of your home, since it’s conditioned air that just came from the HVAC unit.
How to move thermostat without rewiring?
To move a thermostat without rewiring, remove the interface from the panel and disconnect the wires. Then, drill a new hole where you want to move it. Run the wires to the new hole with a wire fishing tool, then reconnect and mount the interface. This is the easiest way to move your thermostat and can be done in less than an hour.
What to wear when moving thermostat?
For an extra layer of safety, wear gloves when moving your thermostat. These will not only protect your hands from any sharp edges but also electrical current. Just in case, having that extra protection will give you more confidence.
What happens if your thermostat is faulty?
A faulty thermostat can cause all kinds of problems including a high electric bill. A thermostat that displays the wrong temperature could lead to overheating. It could also give you a faulty reading and turn on when it is not supposed to.
Can you move a thermostat to an adjacent wall?
Sometimes, there are things in a house that just don’t quite feel right. If your thermostat is on a wall that isn’t convenient or is in the way, there is a way to move it easily. If you want to move it to an adjacent wall, you can do so without even doing any rewiring.
Is it safe to use a thermostat in a room?
Before starting, you should make sure that any and all power is off in the room you are working in. This will ensure that you stay safe during the entire job. Although the wires going to the thermostat are not high-voltage, there are others in the wall. It is better to be safe.
Can you repaint a thermostat wire?
With a spackle that matches your wall, fill the old hole that the thermostat wires were previously run through. After it has dried, you can repaint it to match the finish on the wall. No one will be the wiser that it has even been moved.
