The answer is yes, you can put a larger bar on a chainsaw. However, there are a few things you need to keep in mind before you do so. First, you need to make sure that the saw is designed for a larger bar. Some saws are only meant to accommodate a certain size bar.
Can you put a bigger bar on a smaller chainsaw?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Is a bigger chainsaw bar better?
Typically a chainsaw with a shorter bar around 14” and smaller is enough for property maintenance, trimming, pruning, and cutting down broken tree limbs. On the other hand, cutting down small trees, thick branches, and cleaning up storm damage will need a longer bar around 16”-20” to make the job easier and safer.
Can I put a 20 bar on my Stihl chainsaw?
Stihl calls this category of saws its "Farm & Ranch" models, and their engine sizes range from 50 cc to 64 cc. All of these models -- which include the MS 271, MS 291, MS 311 and MS 391 -- can take guide bars between 16 and 20 inches.
Can you use different bars on chainsaw?
No, chainsaw bars are not universal. There is no one-size-fits-all chainsaw bar. When you have to replace your old or broken chainsaw bar with a new one, brand and model always play a role. In most cases, it is possible to use a bar from a Husqvarna as a replacement for the one you have on your STIHL chainsaw.
What is the best bar size for a chainsaw?
16 to 18-inchRecommended chainsaw bar length for home use A 16 to 18-inch bar should be enough to get the job done. This longer bar length will also work for cutting down small trees or removing shrubs.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
Does Stihl make a 30 inch bar?
OEM chainsaw bar from Stihl....SKU.Length30" (75cm)Bar Mount3003 (D025)5 more rows
What is the longest bar on a chainsaw?
The longest bar created is the Stihl chainsaw which measures 72 inches. However, it's not commonly available in hardware stores or chainsaw shops. Amazon only caters to one 72″ chainsaw bar, mainly the Forester chain, compatible with Husqvarna machines.
How big of a bar can you put on a Stihl 250 chainsaw?
18"Available with 14"/35cm, 16"/40cm or 18"/45cm guide bars.
What is the fastest cutting chainsaw chain?
The fastest cutting chainsaw chain is either a full chisel or a chisel skip chain. The full chisel offers the fastest and most aggressive cutting action for chainsaw bars that are 24” or less. For bars that are longer than 24”, choose a chisel skip chain.
Can you put a Stihl bar on a Husqvarna chainsaw?
These bar adapters allows you to run 12mm Stihl mount chainsaw bars on many Husqvarna chainsaws. Great for those operators who run both brands of saws, because you only need one type of bar now, one with a 12mm Stihl mount.
What makes a chainsaw chain low kickback?
Low profile chains or semi-chisel chains are ideal for beginner chainsaw users as they are designed to incur less kickback. A full chisel chain has square-cornered cutting teeth, which cut through wood quicker but also have a higher risk of kickback.
How do I find the right bar for my chainsaw?
You'll be measuring the useable length of the bar, also called the cutting length or the called length. To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches.
What size bar can you put on a Stihl ms170?
Ematic Lubrication SystemPOWER SOURCEGasGUIDE BAR LENGTH (Recommended)16 in.OILOMATIC® CHAIN3/8" PMM3CHAIN OIL CAPACITY4.9 oz.ENGINE POWER1.7 bhp3 more rows
What's the longest bar for a chainsaw?
The longest bar created is the Stihl chainsaw which measures 72 inches. However, it's not commonly available in hardware stores or chainsaw shops. Amazon only caters to one 72″ chainsaw bar, mainly the Forester chain, compatible with Husqvarna machines.
What size bars does Stihl make?
STIHL guide bars range from 10" (found on our tree-trimming pole pruners) to an incredible 59" (used in extreme felling operations). STIHL manufactures over eighty bar configurations to match the unique cutting requirements of our hardworking chainsaws.
What size chainsaw bar do I need?
The size of bar required will depend on the type of cutting you are planning to do.
Who makes the best chainsaw bar?
Many chainsaw manufacturers produce their own cutting components. Stihl and Husqvarna are just two manufacturers who have quality products.
What is a narrow-kerf bar?
The kerf refers to the width of the bar and therefore the type of chain it can carry. As the name implies, a narrow kerf means it has a smaller width than the standard kerf unit. As the saw cuts, it creates a channel or groove and this is the kerf. The narrow kerf bar removes less material than the standard kerf, thereby creating a narrower groove.
What maintenance should I do on my bar?
You don’t need to be a rocket scientist to figure out that the saw’s cutting components get some pretty rough treatment. As well as supporting a fast moving chain, the blade can often get pinched in wood and bent with heavy use.
How many teeth does a chain saw have?
On chainsaws, the number of teeth on the sprocket varies and those with up to 10 teeth tend to have low kickback qualities. Models with 11 teeth or more have a higher kickback tendency but better cutting performance, though these tend not to be found on homeowner saws. Most homeowner saws have sprocket nose guide bars and whilst these offer better ...
What size sprocket do you need for a carving bar?
Some carving bars have. very narrow tips. These ‘dime’ tips need a ¼ inch sprocket to run the small chains which will go round the tip of the bar.
How big is a Husqvarna saw bar?
They come in a variety of sizes. Typically, most homeowner saws have bars which measure between 10 inches and 20 inches in length, although something like the Husqvarna Rancher 460 can take a 24-inch bar. As you would expect, professional saws are capable of handling even bigger units than this.
Can you Put a Long Bar on a Chain Saw?
The official answer to this question is NO, because of the design and construction of the chainsaw itself.
Why You Might Want to Put a Longer Bar on a Chainsaw
There are times when it is simply not possible to cut something from the ground with your normal saw because of the height of the object that needs cutting or because of strong winds that make things dangerous.
Different Types of Bar Designs for Different Chainsaws
Before you go out shopping for a longer bar, it is important to understand that they are designed differently depending on the type of saw you currently own.
Bar Lengths
Remember that a longer bar will not always give you more reach. It all depends on the angle at which you cut too. For example, if your tree branches are growing horizontally, a 10-inch bar may be too long for you to use because of the angle.
Chainsaw Maintenance Tips for Longer Bars
Even if you have bought the correct length of chain for your chainsaw using a longer bar, you will still need to keep your saw well maintained.
Benefits of Having an Extended Bar on Your Chainsaw
There are some definite benefits of having an extended bar on your chainsaws. These include:
Conclusion
Can you Put an Extended Bar on a Chainsaw? An important thing to keep in mind before we begin is that not all saws are suitable for extended bars. It all depends on the length of your bar and how well it fits onto your particular chainsaw model.
How to change a bar chain?
The chain needs to fit precisely onto the bar in two ways. First, it must be exactly the right diameter to fit snugly around the bar and sprocket. Second, the drive links, on the inner ring of the chain, must fit exactly in between the guide slots on the new bar. If the guide links are too small, you'll throw your chain off constantly; if they're too large, you'll create a lot of pressure, which can bind the chain and snap it in half at dangerous speeds. The pitch and measurement of the bar is located on the heel. The pitch of the chain will be located on the box it came in. These measurements must match; if they don't, you will create an extremely dangerous cutting situation.
How big is a chainsaw guide bar?
Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches. Check the specifications in your model's operator's manual to see what size bars you can run on your saw. Advertisement. Video of the Day.
What happens when the guide links on a chain are too small?
If the guide links on the chain are too small, the chain will grind down the sprocket and the drive links.
What does the number on the chainsaw heel mean?
Chainsaw bars will generally have a string of letters and numbers on the heel, which indicate the size and pitch of the guide slots.
What happens if the oil bar is too small?
The new bar must fit tightly on the metal bar posts so it doesn't wiggle around, which, if the bar is too small, will create a dangerous situation. The replacement bar also must align properly with the oiler nipple. This nipple sits just beside the bar posts and connects the oil pump to the bar. If the bar doesn't rest directly on ...
Where is the pitch of a chainsaw?
The pitch and measurement of the bar is located on the heel. The pitch of the chain will be located on the box it came in. These measurements must match; if they don't, you will create an extremely dangerous cutting situation. Advertisement.
Can you cut your leg with a bar?
Besides cutting your leg, the risks of changing out a bar for an improper one could mean your life. Using anything other than what's recommended in your model's operator's manual can create an extremely hazardous situation, even when wearing the proper protective equipment. So follow the manufacturer's guidelines to reduce the risk of complications. Not only will you save your legs, you'll also prevent unnecessary damage to the chain, clutch, and crankshaft.
