You can put a new pool liner on wet sand if the sand isn’t too slushy. It’s actually better to place large pools on the sandy ground because sand compacts more easily than dirt. But always read your pool’s installation instructions first.
Full Answer
How much sand do I need to build a pool liner?
Using fine sand (free of rocks and debris), lay a 3″ thick bed of sand across the entire inside of the pool (wall-to-wall) this will form your base. After installing the 3″ sand base, lay the liner floor pad on top.
Can I use dirt as a base for my swimming pool?
A: We do not recommend using dirt as the base for your pool. Dirt may contain rocks or pebbles that can damage your liner. We only recommend very fine mason sand for your swimming pool sand. Q. Do you need to compact the sand? A: You need to pack down the cove you built using a tamp tool. Be careful not to scratch the pool wall when doing this.
How do you lay a liner floor pad for a pool?
Using fine sand (free of rocks and debris), lay a 3″ thick bed of sand across the entire inside of the pool (wall-to-wall) this will form your base. After installing the 3″ sand base, lay the liner floor pad on top. Please note your liner floor pad is pre-cut to fit your pool’s exact dimensions.
Can you use sand to level the ground around a pool?
The ground should be dug level on virgin soil always. The sand is simply a buffer from the pool liner to the ground. The purpose of the sand is not to level your pool. If you are using sand to level things out you will have nothing but problems. Mistake 3: Setting the track on sand.
Can a pool liner be installed in the rain?
1:081:43Can a pool liner be installed in the rain? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIdeally. You want to wait for a dry sunny warm day any time you install a vinyl liner in a swimmingMoreIdeally. You want to wait for a dry sunny warm day any time you install a vinyl liner in a swimming pool.
Can you install a pool on wet ground?
Never install an aboveground pool when it's raining. Rain can wash off the walls of the excavated area. And this does not provide proper support for the pool. Also, when it's raining, the soil surrounding the pool will be denser, making the aboveground sink into the ground.
What kind of sand do you use under a pool liner?
Yellow Mason SandYellow Mason Sand It is extremely popular for recreational uses such as volleyball courts and beaches and in the development of swimming pools. We've found that many homeowners and contractors prefer to use mason sand for use with swimming pools.
Can you install a pool liner on a cloudy day?
Liners should never be installed during temperatures below 50° and sunny. If you choose a pool liner that is thicker than standard (20 Mil is the standard thickness for in ground liners) then the need for warm weather is greater.
How long does it take for pool cement to dry?
After the concrete is sprayed on, it needs time to reach its full potential. It doesn't dry, per se. It hardens and strengthens in a long process called curing. For a pool shell, this takes about 28 days.
Can you concrete a pool in the rain?
The construction site should be dry If there has been rain or dew you should ensure that the site is dry so that construction can take place. Leave the area to dry as it takes time for it to dry out completely.
What is the best sand to put under a pool?
For your pool's base, you want sand that's very fine and free of any rocks or pebbles. This type of sand is referred to as mason sand, masonry sand, or sometimes mortar sand. While mason sand is the most popular choice, another option is concrete sand.
How many inches of sand do you need for a pool?
Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet. The standard depth of sand that should be used under an aboveground pool's floor is 2 inches.
How much sand do I need to put under my pool?
Volume = (width x length x depth) x 0.037 For a rectangular pool that's 18 feet long by 9 feet wide, you'd need at least 1 cubic yard of sand for your base.
What temperature should it be to install a new pool liner?
between 50° and 80° F.Extreme heat will cause the vinyl pool liner to expand too much to the point where you will never get the wrinkles out. Conversely, installing a vinyl pool liner on a very cold day will cause the vinyl to constrict and potentially tear. Ideal installation temperatures range between 50° and 80° F.
Why does my pool liner keep falling?
Long-Term Damage. Over time, the liner track can open up due to factors like water pressure and the age of the liner. The lip on the bead will no longer stay in the track by itself. Once the liner pull is done, a liner lock or retainer strip will be needed to temporarily hold the liner in the track.
What time of year should I replace my pool liner?
If you can't get an early install due to cold or rainy weather, your next best bet is to get it done right before pool season, in May or early June. If it's timed right, you can get your new liner replaced just in time for your family to use it as the weather turns hot. The earlier you install your liner, the better.
Can you put an above ground pool on soft ground?
A popular stabilizing option for above ground pools is poured concrete. They last a very long time and are completely flat and very durable. However, they can be pretty rough on softer materials and wear out the pool liner over time. So I recommend placing another layer in between the pool and the concrete.
Can you put a pool over buried power lines?
Pools should never be constructed or placed over underground electric cables. Pools and pool decking should be installed at least five feet away from all underground utility lines.
Can you put an above ground pool over a gas line?
Pool Location Some communities may also forbid swimming pools in side yards. Local set-back rules must be followed. In many communities, above-ground pools must be at least 10 feet from buildings, fences and property lines. Pools cannot be placed over any underground sewer, water or utility lines.
How do you stop groundwater seepage in the pool?
1:353:15Inground Pools and Ground Water - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe also installed a submersible pump. And once we got down to our excavated depth we over dug byMoreWe also installed a submersible pump. And once we got down to our excavated depth we over dug by about six inches or so and we installed gravel down in there and we put that pump on top of the gravel.
How thick should sand be for a pool?
Using fine sand (free of rocks and debris), lay a 3″ thick bed of sand across the entire inside of the pool (wall-to-wall) this will form your base.
What is a pool floor pad?
Liner Floor Pad is a tough Geo-Textile material that cushions and protects the bottom of the pool liner from sharp objects, such as roots and rocks. It’s pre-cut to fit your pool size and gets installed directly on top of the 3″ bed of sand at the bottom of the pool.
How high is a pool cove?
Pool Cove (Foam) Pool Cove is foam that easily peels and sticks to the inside base of the pool wall. The foam pool cove is 3-3/4 inches high and must be installed on top of 3 inches of sand.
Is it necessary to install an above ground pool?
It’s time to install that Swimming Pool and it’s essential that it’s installed correctly to ensure many years of fun in the sun. Many first time pool owners are who installing an above ground swimming pool for the first time have questions regarding how to properly install a base underneath a pool liner. There are several options that can be purchased to give you years of pool fun and protect your pool for a much longer life span.
Can you put vinyl above ground pool liner on a metal pool?
This is the completed above ground pool liner installation. The vinyl pool liner should be completely supported by the pool base to avoid any stress or damage to it or the metal pool wall .
How long does it take for a sharkline pool to set?
It's not always wet. A heavy flooding rain will soak into the ground within a week usually 3-4 days. But at least once a year the water will set for 2 weeks or more because of multiple rain storms back to back. Anyone willing to stick there neck out for the durability of the sharkline matrix, or any other pool.
Do you need a French drain for a pool?
You need drainage. One way or another (perhaps a French Drain), you need to get that water away from your pool.
Is the matrix a good pool?
The matrix is a very good pool.
Can you use sand to build a pool?
Your going to have to get the area raised to keep the pool up out of the water. Sand is not going to work because it will not compact well enough. You have to use something that will compact like crushed stone. 2A modified to be exact would be great. You'll need to get all the topsoil off first.
What is the difference between sand and sand for above ground pool?
The sand that lies underneath your pool is called “mason sand”, while the sand for your filter is simply called “filter sand” or “silica sand”.
How to pack down a cove in a pool?
A: You need to pack down the cove you built using a tamp tool. Be careful not to scratch the pool wall when doing this. Smooth out the rest of the swimming pool sand base using a rake. Be sure to wet the sand prior to tamping it. This will help the sand pack better. Then tamp the entire bottom of your pool. Doing this will reduce foot prints in the sand and provide a firm and even bottom for your pool.
What is filter sand?
Filter sand, or silica sand, is specially graded to trap very small particles. This is the type of sand your filter needs in order to properly clean your above ground pool. It is usually sold in 50lb bags and can be found in any pool store.
Can you put an above ground pool on concrete?
A: It is definitely possible to install an above ground pool on a concrete slab. Typically, professional installers use the sandbox method to do this type of installation. This means that they will build a box using wood planks and fill it with mason sand. The pool is then built inside the sandbox, using the sand to make sure the pool is completely level. Also, oval shaped above ground pools have support beams that run underneath the pool that need to be buried. These will be buried in the sand inside the sandbox. You can see pictures of this type of installation in our photo gallery.
Can you use sand for a pool?
A: We do not recommend using dirt as the base for your pool. Dirt may contain rocks or pebbles that can damage your liner. We only recommend very fine mason sand for your swimming pool sand.
Can an above ground pool be buried in the sand?
The pool is then built inside the sandbox, using the sand to make sure the pool is completely level. Also, oval shaped above ground pools have support beams that run underneath the pool that need to be buried. These will be buried in the sand inside the sandbox. You can see pictures of this type of installation in our photo gallery.
Can you use mason sand for an above ground pool?
It is very fine and should not contain any rocks or pebbles. This will create a very smooth bottom and is the most popular method to use when installing an above ground pool. You can call The Pool Factory to find out the correct amount of mason sand you will need for the size of the above ground pool you have in your backyard.
What happens if you push dirt around a pool?
If you are pushing the dirt around to level out the site for the pool, eventually the dirt will settle and your pool will no longer be level. This might happen right away when you fill the pool, or shortly down the road, one thing is for sure, it will happen. Pool Pros always digs out to the lowest spot so the entire pool is sitting on virgin soil.
Is sand needed for pool leveling?
The ground should be dug level on virgin soil always. The sand is simply a buffer from the pool liner to the ground. The purpose of the sand is not to level your pool. If you are using sand to level things out you will have nothing but problems.
Can pool pros use patio blocks?
We get countless calls every spring for torn liners and when we get to the site we see a patio block that has heaved out and cut through the liner. Pool Pros never uses patio blocks. Again we level the entire site down to virgin soil and place the uprights and track right down on the ground.
What happens when you put plastic under a pool liner?
If something like plastic is placed under the liner though, this moisture can get trapped and have nowhere to go.
How much sand should I put down for an above ground pool?
It kills me when I see an above ground pool install manual say that a pool like a 24’ round needs a minimum of 3-4 yards of sand put down. It is true that sometimes this much sand is needed, but in most cases, it’s too much soft material.
Why do you need to coat above ground pool walls?
Better quality above ground pool walls are coated to help prevent the beginning of corrosion caused by moisture. This coating can only protect for so long. If the wall is exposed to moisture long enough, then it can penetrate the coating and the metal wall will start corroding.
What happens if you have too much sand?
I bring this up because if you have too much sand, you’re more likely to have a bumpier bottom than if you didn’t have as much.
Can moisture go on a pool wall?
Eventually, the moisture will make its way over to where the ground meets the pool wall, and some of it will hang out against the metal wall. If this moisture cannot go anywhere, it will stay next to the pool wall and will soon get past any protective coating the wall has. Once the coating is lifted by the excessive moisture, the metal wall will begin to corrode. This is not at all good.
Do you have to put a pool liner down?
In reality, most pool sites don’t need anything to go down as the liner is designed to sit directly on top of the earth.
Can you add sand to a pool in Florida?
In Central Florida (where I install pools), I almost never add sand to a pool bottom. THE REASON – In most yards here, the earth is already mostly sand based. By adding sand to an already soft base will make the bottom too soft and “footprinty”.
