How to level a pool on concrete?
Spread and tamp a layer of sand over the area.
- If there are any areas that you need to level, use crushed limestone instead of sand.
- Order masonry sand from a home improvement store or pool retailer to ensure the grains are evenly sized and debris-free. ...
- Double check the sand for rocks, large grains, and other debris when you spread it.
How much does it cost to install a concrete pool?
Pools made of concrete tend to be the most durable and long-lasting. Unfortunately, they are also the most expensive. The exact cost of a concrete pool depends on the size, its features and your geographic location. Generally, budget anywhere from about $20,000 to $45,000.
Can You setup a pool on a concrete slab?
Yes, you can put an inflatable pool on a concrete slab, and is in fact one of the recommended inflatable pool terrains to use. If setting an inflatable pool on a concrete slab, it’s recommended to use a ground cloth to protect the pool liner from wear and damage.
How do you clean cement around an in ground pool?
How to Clean Concrete Pool Decks
- Produce Your Homemade Concrete Cleaner. The first step in cleaning concrete pool decks is to produce your own easy-to-make, highly effective concrete cleaner.
- Scrub Your Concrete Pool Deck. ...
- Rinse off Your Concrete Cleaner. ...
- Use TSP for Tough Stains. ...
- Seal the Concrete to Prevent Future Stains. ...
Is it best to put above ground pool on concrete?
Not only can above ground pools rest on concrete, but they should! Typically these concrete slabs are leveled and provide a comforting structure that will prevent moisture from building up or mold from taking place.
Why can't you put a pool on concrete?
A concrete pad is actually a very good base for a swimming pool, according to pool supply company Inyo Pools, since it will be perfectly flat and level, which means the pool is unlikely to shift. But concrete is a rough surface, and it will abrade the pool liner over time.
What kind of above ground pool can I put on concrete?
0:251:42Should you install your pool on a concrete pad? - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay we'll go with that scenario. The we don't recommend putting them on a concrete pad and theMoreOkay we'll go with that scenario. The we don't recommend putting them on a concrete pad and the manufacturer. Doesn't for a couple reasons typically the concrete pads don't drain well so what happens
Can I put Intex pool on concrete?
Can I put my Intex Pool on the driveway or concrete patio? YES. As long as your driveway or patio is level, this is a great place for an Intex Pool.
What is the best thing to put under a above ground pool?
A pool pad is a material designed specifically to place under your above ground pool. They are generally used on a concrete slab. The pool pads can be cut to perfectly fit your pool's base. Pre-cut pool pads are made of a super durable material and will not trap moisture.
What is the best base for an above ground pool?
Above-ground pools must have a base material in order to withstand many tons of water weight. Mason Sand or Stone Dust is what installers use. Other accessories include Rhino Pad, Armor Guard, and or Liner Shield. These three items are GEO textile materials that protect the pool's liner.
Should I put sand under my above ground pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool's vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
How much weight can a concrete patio hold?
A typical residential patio is 4″ thick with an average of 3000 pounds per square inch ratio. It is designed to carry more than the weight of two automobiles. The average compact car is about 3,000 to 3,500 lbs. A mid size car, van or light truck is about 5,000 to 7,000 lbs.
What can I use instead of sand under my pool?
Here are some alternatives that we've discussed: Old carpet could be nice, although it will get moldy over time, giving it about a year. Cardboard boxes will work for a few weeks, until they fall apart. A few old blankets could also work, but they won't last a year.
How do I level the ground for an above ground pool without digging?
There is an easy way to do this. Screw two 2-by-4 boards together alongside each other so they are one or two feet longer than the diameter of your pool. Next, lay the attached boards on the ground where the pool will be and put a level on top. Slowly lift and lower one side of the 2-by-4s until it shows level.
What do you put under a pool?
By far the best material to place under a swimming pool liner is Armor Shield or Gorilla Pad. These materials are breathable allowing moisture to escape and are extremely tough, keeping insects and moles from coming through and piercing the vinyl pool liner.
How do I prepare my yard for an above ground pool?
How to Prepare Your Yard for Above Ground Pool InstallationSTEP 1: Be flexible based on weather. ... STEP 2: Secure any pool permits. ... STEP 3: Mark your pool location & equipment. ... STEP 4: Confirm access to electric outlet. ... STEP 5: Make sure your backyard is easily accessible. ... STEP 6: Have mason sand delivered near the pool site.More items...•
What do I put under my Intex pool?
As a general rule, Intex recommends a ground cloth or tarp to be placed underneath the pool to protect the pool liner. In addition, I have found that adding a foam layer can further protect the pool from sharp objects such as stones, plus it will make the bottom of the pool feel soft underfoot.
How long do steel frame above ground pools last?
10 to 20 yearsAnother advantage that many people appreciate is that a steel pool does not require as much cleaning as concrete or fiberglass pools. If properly maintained, you can expect your steel framed pool to last a decent 10 to 20 years. One disadvantage of steel frames is that they are prone to rust.
Can an above ground pool be installed on pavers?
Pavers must sit on solid earth, level and covered up with a solid layer of 3-4 inches of compacted stone dust inside the pool. This will make for a solid base and a professional pool bottom that will last the lifetime of the pool. Pools are heavy when water is in them. Make sure the pavers are on solid earth!
How do I level my ground for a pool without digging?
There is an easy way to do this. Screw two 2-by-4 boards together alongside each other so they are one or two feet longer than the diameter of your pool. Next, lay the attached boards on the ground where the pool will be and put a level on top. Slowly lift and lower one side of the 2-by-4s until it shows level.
How thick should concrete be for an above ground pool?
For an above ground pool, you can get away with only a 2” thick pour. Concrete is expensive. You can save some money by just making a 2″ thick pour. Some will think that the concrete needs to be at least 4” thick as pool water is heavy. This is not needed as the water weight is evenly distributed.
How far off from one side to the other will a slab show in a pool?
A slab even as little as an inch off from one side to the other will show in the finished pool. So, you want to get this level.
How far off an inch should a pool be?
As a professional installer, I shoot for the pool to being off no more than one-quarter of an inch max . If your slab is only off an inch total from one end of the pool site to the other, you may be ok to proceed with the install. It won’t affect the pool in any way but may bug you as it will be slightly noticeable.
Why is my concrete patio off the ground?
This is because any outdoor hard ground surface needs to have a gradual drop-off to allow rainwater to drain off of it.
How much should the wall of a pool be level?
If you are doing the job yourself though, keep in mind that the wall of the pool should be level to within at least a half-inch.
How thick is a pool shim?
You will need to be able to elevate each bottom connector to a specific height. This will need something like 4”x4” square shims made of metal or plastic that are thin enough to create thicknesses plus or minus at least 1/8 of an inch.
Can you put an above ground pool on an existing slab?
Using an existing slab to put an above ground pool on seems like a better and easier idea than installing it on the earth, but it’s oftentimes very problematic. This is all because most existing slabs are off-level.
What is the best base for an above ground pool?
As long as it's flat and level, a concrete pad is a perfect base for an above-ground pool.
How much water is sloshed out of an above ground pool?
It may result in significant amounts of water being sloshed out of the pool. A difference of more than 3 inches is not acceptable ...
Why do you put a pool on a pad?
Moreover, water flowing naturally in the yard will flow around the pad rather than under the pool. This eliminates the possibility of soil erosion under the pool throwing it off-level.
Why do you need a pad for a pool?
A Pad Protects the Pool from Rain and Snowmelt. It may seem paradoxical that a pool filled with water would need protection from water, but it does, especially around the base. When the pool is set directly in the ground, water runoff and snowmelt naturally seep underneath it, and the weight of the water in the pool creates a protected environment ...
How thick is a concrete slab?
Concrete slabs vary from 4 to 8 inches thick. Even a low-strength, 4-inch concrete slab can withstand a weight of 1,700 kilograms per square centimeter, or 24,123 pounds per square inch. This is more than strong enough to support an 18-foot by 4-foot-deep round pool.
Why does concrete flatten?
Because it's a liquid, fresh concrete will level itself on a base that may not be level. Also by virtue of its liquidity, fresh concrete naturally flattens itself, eliminating the possibility of liner-puncturing protrusions, such as tree roots. Advertisement.
Can you put a pool on a concrete pad?
Homeowners who choose to install one of these pools often set it directly on the ground, but it's a better idea to place it on a concrete pad. A properly constructed pad is reliably flat and level. Also, a concrete pad keeps the base of the pool above the ground, thus preventing deterioration from moisture and mold.
Can You Put An Intex Pool On Concrete
An Intex Pool would install nicely on concrete, all you would need would be a pool pad of some sort to set it on. The only problem is that there is no way I can think of to level the area. Installing a standard steel wall above ground pool on un-level concrete, however, is pretty easy.
How To Build A Concrete Pool Above Ground
The above ground concrete pool construction process is a little different from building an inground pool. Instead of digging a hole and laying a web of rebar, you would start by building the walls around your pool . From there, you might build your pool as usual, often using the gunite process, but the exact process will vary by contractor.
Can I Put An Above Ground Swimming Pool On A Concrete Slab
Above ground swimming pools let families obtain the fun of a pool without spending large amounts of cash. Another attractive feature is that above ground pools can be installed on most solid, level surfaces, including concrete. A concrete slab can actually be a perfect platform on which to place an above ground pool.
Build The Bottom Ring
Follow the instructions that come with your above ground pool package as each type, brand and size of pool have different instructions. In general, you will be using your plates, stabilizers and rails. Here are some tips to identify each piece:
How To Level An Above Ground Pool The General Solution
Before we show you the different solutions you can use when leveling your above ground pool, we need to ensure that you are familiar with the general leveling procedure:
Ensure The Ground Is Level And Prepare It For Construction
Part of proper pool planning includes choosing the area for your pool and obtaining the permits to install your pool. Once that has been completed the next step is to ensure the ground is level. This is a critical step to ensure your pool is structurally sound and safe.
Tips For Installing Plates Rails Covers
Follow manufacturers instructions carefully. The pieces should all fit together easily.
How big of a hole do you need for an above ground pool?
The hole should include a 1½ to 2-foot margin all the way around so a worker has enough space to access all the pool components.
How much does a backyard pool cost?
The average cost of a classic in-ground, concrete-lined swimming pool that’s 14x28 feet is $30,000 to $50,000. That can be a lot of bucks per splash. Above-ground pools are the much-less-expensive alternative.
How much does it cost to dig a hole for an 18 foot pool?
Digging the Hole. First, you’ll still need to dig a hole. Excavation of a hole big enough for an 18-foot round pool can cost $500 to $1,500 if your yard is easily accessible for heavy machinery and the soil isn’t problematic.
Can you backfill an above ground pool?
But don’t backfill until you’ve filled the pool with water. Most above-ground pools aren’t designed to withstand pressure from the outside. If you backfill around an empty pool, you run the risk ...
Is an above ground pool safe?
An above- ground swimming pool has a built-in measure of safety because the edge of the pool is high off the ground and out of reach of small children. A gated, lockable ladder adds an essential layer of safety. An in-ground pool, however, is more of a concern.
Can a warranty be voided if a pool is installed below grade?
Before you buy an above-ground unit with the intention of setting it in the ground, check the manufacturer’s warranty. The warranty may be voided if the pool is installed below grade.
Is it OK to put above ground pool on concrete?
As long as it's flat and level, a concrete pad is a perfect base for an above-ground pool. If you don't have the budget or space for a built-in pool, an above-ground model is a great alternative.
What do you put under pool on concrete?
Use rigid urethane foam sheets for pool pads, not soft upholstery foam. Solid foam insulation can be ideal on a concrete surface. One of the benefits of solid foam insulation is that it's made of polystyrene or polyurethane and thus is easily cut and shaped.
Can you put a pool on a patio?
Yes, you can put an inflatable pool on a concrete slab, and is in fact one of the recommended inflatable pool terrains to use. If setting an inflatable pool on a concrete slab, it's recommended to use a ground cloth to protect the pool liner from wear and damage.
Do I need a tarp under my pool?
At the bare minimum, yes you should put a tarp underneath your Intex pool. Inflatable pools, Bestway and Summer Ways pools will also benefit from a tarp. What is this? Although a tarp will help protect your pool there are far better choices such as foam tiles or proper commercial under pool pads.
What can I use instead of sand under my pool?
Old carpet could be nice, although it will get moldy over time, giving it about a year.
What is a gorilla pad for pool?
Gorilla Pads are pre-cut floor pads designed to protect and cushion the bottom of above ground pools. Unlike old pool foam padding, which can be easily be cut or pierced by grass, roots, or rocks under your above ground pool liner, Gorilla Bottom pool floor padding is impervious to almost any sharp object.
Can you put an above ground pool in a garage?
A garage pool can be the least expensive option for installing your Endless Pools model. Most garages already have a level concrete floor (and if it's slightly out of level, that can be easily, affordably fixed). An above-ground garage pool could save you money and be up and running the quickest.
What is the best base for a pool?
A concrete pad is actually a very good base for a swimming pool, according to pool supply company Inyo Pools, since it will be perfectly flat and level, which means the pool is unlikely to shift. But concrete is a rough surface, and it will abrade the pool liner over time. A padding layer is crucial when installing a pool on concrete, but the most common form of padding — a layer of sand — is not suitable as a base layer in this situation. Over time, the blog Above Ground Pool reveals, sand will shift and leak out from under a pool installed on concrete, ruining its ability to offer any kind of cushion. For pools installed on concrete, use other options for padding.
How to get rid of weeds in vinyl pool liner?
This is one of the few weeds that may grow up through the bottom of a vinyl pool liner. Avoid partial burial of the pool if you can. Raising the bottom of the pool slightly above the surrounding ground is better. Clear the area for the base padding about one foot outside the perimeter of the pool wall. Fill this area with wood chips ...
How much does pool padding cost?
For example, PC Pools sells 18-foot, round, above-ground pool padding for less than $150. Advertisement.
What happens if your pool pad is tight?
If your pad has a tight weave, water condensation can collect and cause mildew, metal corrosion, and mold, according to pool care blog Poolonomics.
What are the disadvantages of pool padding?
If your pad has a tight weave, water condensation can collect and cause mildew, metal corrosion, and mold, according to pool care blog Poolonomics.
Can you use urethane foam on concrete?
Use rigid urethane foam sheets for pool pads, not soft upholstery foam. Solid foam insulation can be ideal on a concrete surface. One of the benefits of solid foam insulation is that it's made of polystyrene or polyurethane and thus is easily cut and shaped. This is according to home services provider Dr. Energy Saver.
Can you put a pool on a lawn?
While it is possible to install the pool directly on a lawn surface (most pools are designed for exactly this) installing a perfectly smooth, flat, and slightly soft or resilient padding layer below the pool will prevent abrasion and reduce the likelihood of punctures to the pool liner. Advertisement.
Can You Put an Above Ground Pool on a Slope?
If your home has a sloping backyard then chances are you have great views from your patio and bedroom windows. But a home built on a hill or a steep slope presents many construction challenges. You are justified in asking if you can even put an above ground pool on a slope?
Can You Bury an Above Ground Pool?
Most above ground pools are not designed to withstand the pressure of backfill. Sooner or later, the pool walls will collapse inward, especially if the pool water is drained for maintenance or repairs.
How to Install an Above Ground Pool on a Gentle Slope?
Quite a few homes are on lots that have a gently sloping backyards. A gentle slope is when the vertical rise over a 100′ horizontal run is less than 15′ (a gradient of 15%). Anything more and your home is legally on a steep hillside.
How to Install an Above Ground Pool on a Steep Slope?
Installing an above ground pool on a steep slope is quite challenging. The construction of the pool base needs to account for both the terrain and the steepness of the slope.
What You Can Put Under Your Above Ground Pool
A popular stabilizing option for above ground pools is poured concrete. They last a very long time and are completely flat and very durable. However, they can be pretty rough on softer materials and wear out the pool liner over time. So I recommend placing another layer in between the pool and the concrete.
Frequently Asked Questions
Above ground pools require a stable base because they are generally made of flimsy vinyl material. A flat, durable surface ensures that your pool will not tip over and spill vast amounts of water. The natural ground can shift over time, so even if you believe your swimming pool has a stable base, it may not be very stable in a few years.
Bottom Line
Above ground pools are a great and cheaper alternative to installing an inground pool. They can be super easy to maintain as well. As long as your yard has a generally flat area, you should be able to install an above ground pool. But to ensure the safety of your above ground pool, make sure you place the pool on a stable surface.
