Do you drywall the walls or the ceiling in a mobile home?
Most mobile homes are constructed to give an eight-foot ceiling height, so the drywall sheets should fit between the floor and ceiling. If you decide to replace the ceiling panels as well, then you should drywall the ceiling before you tackle the walls.
Why do mobile home walls have strips on them?
If you’ve never lived in a mobile home, there’s one thing that we all hate – those darn strips on mobile home walls that they use to hide the cracks in the drywall. Mobile homes are made with pre-wallpapered dry wall, then matching strips are made to hide the gaps, because they’re made as quickly and cheaply as possible.
How do you attach drywall to studs in a mobile home?
The most common method of attaching drywall to the studs is by using screws, but mobile home drywall adhesive is available and will secure the sheets to either the studs or the existing panels. Most mobile homes are constructed to give an eight-foot ceiling height, so the drywall sheets should fit between the floor and ceiling.
What makes a good mobile home wall?
Good walls should be easy and inexpensive to maintain, and at the same time contribute to your home’s visual appeal. There are dozens of mobile home walls materials available in the market, each of which come with their own set of pros and cons.
Is drywall too heavy for a mobile home?
Drywall that is 5/8″ thick is, of course, a little heavier, at 2.31 pounds per square foot or 73.92 pounds per sheet which is entirely too much for mobile home ceilings.
What kind of drywall do you use in a mobile home?
Vinyl-Over-GypsumThe most common type of wall used for a manufactured home is called Vinyl-Over-Gypsum or VOG for short. VOG is drywall that is coated in vinyl wrap. This is different way of treating drywall as compared it being taped, floated, textured & painted.
How do you drywall a mobile home wall?
Steps to hanging drywallStep 1: Before You Begin. Remove molding, baseboards, batten strips, outlet covers and wall switches.Step 2: Measure & Cut. With a chalk line or straightedge, mark cut line. ... Step 3: Hang Panel. ... Step 4: Fasten Panel. ... Step 5: Fit Upper Panels. ... Step 6: Cut Around Outlets. ... Step 7: Fit Lower Panels.
Can you replace walls in manufactured home with drywall?
Related Articles. Single-wide mobile homes are designed to be light, but the walls of most of them still contain wooden studs. Manufacturers often cover the walls with 1/4-inch paneling, but the studs can support drywall, so there's nothing preventing you from removing the paneling and replacing it.
How much does it cost to drywall a mobile home?
New Drywall – In a number of our higher end flips, we will tape and texture the existing drywall panels it the home has drywall, or actually install all new drywall if it doesn't. This will run from about $4,000 for a single-wide home to about $6,000 to $8,000 for a double wide.
How thick is drywall in a mobile home?
Manufactured home wallboards range in thickness from 5/16” to ½”. The 5/16” thickness used to be the most popular measurement for Paper On Gypsum (POG) wallboards, but the majority of new Clayton homes with POG wallboards are now 3/8”.
How do you replace interior walls in a mobile home?
0:231:30How To Replace A Wall Panel In Your Manufactured Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the panel adhesive on the exposed wood. And place the new panel on top amer in the finishingMoreApply the panel adhesive on the exposed wood. And place the new panel on top amer in the finishing nails to secure the panel. Step 4 add the finishing touches replace.
Whats the difference between sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
What walls are load-bearing in a mobile home?
The load-bearing walls in a mobile home are typically made up of the marriage line and its exterior walls.
Can you put regular kitchen cabinets in mobile home?
When you wish of installing kitchen cabinets into your mobile home, it's necessary for them to tightly anchor to your wall studs. Solid wall anchors give you the adequate support for the load of the cabinet.
How much does it cost to remove paneling and replace with drywall?
Replacing drywall costs $2 to $3.50 per square foot, including $0.40 to $0.50 per square foot for demolition. For a 200-square-foot room, you can expect to pay $300 to $500 to remove and dispose of the old material. Removing wood paneling to replace it with drywall costs $2 to $4.50 per square foot.
How do you cover seams in manufactured home walls?
3:548:25How to Cover Mobile Home Seams | Drywall Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain this is just drywall tape so this has to go over the seam it makes everything adhere. BetterMoreAgain this is just drywall tape so this has to go over the seam it makes everything adhere. Better it's sticky. So the one side sticks to the wall.
What material is used for walls in a mobile home?
vinyl-on-gypsumManufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.
What are older mobile home walls made of?
Older manufactured homes usually have faux wood paneling or walls made from either paper on gypsum, or POG wallboards, or vinyl on gypsum referred to as VOG panels or VOG wallboards.
Whats the difference between sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How do you cover seams in manufactured home walls?
3:548:25How to Cover Mobile Home Seams | Drywall Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain this is just drywall tape so this has to go over the seam it makes everything adhere. BetterMoreAgain this is just drywall tape so this has to go over the seam it makes everything adhere. Better it's sticky. So the one side sticks to the wall.
What materials are needed to replace a mobile home ceiling?
Tools and Materials Needed to Replace Mobile Home Ceilings. Drywall is one of the best materials to replace a ceiling in a mobile home but installing it on to a mobile home ceiling is a literal pain in the neck. It’s not so much the drywall that is so expensive but all the tools and other stuff you need for it.
How thick is drywall?
Drywall is available in 4-foot by 8-foot panels and four basic thicknesses: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch. The thicker the drywall the heavier it will be. Therefore, you do not want thick drywall on your ceiling.
How much does a sheet of drywall weigh?
The thicker the drywall the heavier it will be. Therefore, you do not want thick drywall on your ceiling. A sheet of 1/4″ thick drywall that is 4′ x 8′ weighs approximately 38.4 lbs.
What is the most effective method of adding insulation to a manufactured home roof?
Blowing insulation into the roof cavity is the most effective and economical method for adding insulation to the manufactured home’s roof assembly.
How long is a drywall panel?
The width is always 4-foot but you can get drywall as long as 14 foot. One sheet to go across the entire width of a single wide is perfect, but a bit difficult to handle. A 10′ long panel is a little easier to maneuver and will still reduce the number of joints.
What is the best way to finish drywall?
You can use different techniques and application methods to achieve different looks. Orange peel (also called splatter or eggshell), Mediterranian, and knockdown are all popular designs. Knockdown is an easy method of finishing a drywall ceiling.
Is drywall cut and dry?
You’ve got your drywall and all the tools and materials and you are ready to roll. Hanging drywall is fairly cut and dry (it’s the taping and mudding that can get make you or break you).
Mobile Home Ceilings- Drywall Thickness And Suitability
My research has indicated that not all thicknesses of drywall can be used as a ceiling for a mobile home. I will explain each different thickness and its suitability under its own sub-heading. To keep these simple statistics are based on 4-foot by 8-foot drywall sheets.
Planning Before Drywalling The Ceiling In A Mobile Home
I see construction fail videos on the internet every day, and the reason for these incidents is that people do not plan. So to prevent situations where ceilings collapse or ceiling fans fall from ceilings, or people get hurt from all sorts of unexpected dangers, proper planning is essential. Here are a few tips:
Conclusion
I hope that the information in this post will also help you make the correct decisions when installing a drywall ceiling in your own mobile home. I found that it helps to ask experts when I am unsure about something.
What is a mobile home wall?
Mobile home walls come in many different materials which can change the way your living room looks, regulate the temperature of your house and affect how easily it can be repaired or replaced. What type of wall is ideal for you will depend on many factors like the size of your house, your budgetary constraints, and the place where you live.
What are the materials used in mobile home walls?
But when it comes to striking that perfect balance between aesthetic appeal, price, and functionality no other materials come close to reaching it as artificial wood, drywall, ceramic tile and plaster.
Why are ceramic tile walls so hard to move?
Perhaps the biggest drawback to ceramic tile walls is that they are difficult, if not impossible, to transport. Being so hard they have a tende ncy to break if the wall is experiencing too much vibration, like that caused when removing a wall or when a truck is towing a mobile through a difficult road.
What is drywall made of?
Drywall is another popular material which can be found in many homes, mobile or not. Drywall panels are made using gypsum plaster which is then pressed into a vertical frame to make a drywall. This type of wall evolved as a simpler, quicker alternative to the traditional lath and plaster walls. While a plaster wall may take up to a week to get dry, even an amateur carpenter can set up a drywall and have it ready in two days.
What is the best material to paint a mobile home?
Ceramic tiles are a popular material used to finish mobile home walls thanks to its durability and visual appeal. Ceramic tiles come in many shapes, sizes, colors and designs, which gives decorating enthusiasts plenty of options to use when designing their homes.
What is artificial wood paneling?
Artificial Wood Paneling. Older manufactured homes that were built around 1960 and 1970 tend to be built with artificial wood paneling. These mobile homes were the type that went up like tinder boxes, before industry standards were in place. Image Credit: Houzz.com. Artificial Wood is a composite material made using wood byproducts, ...
What is a good wall material?
A good wall material should balance both its practical functionality and its aesthetic appeal, giving your home a pleasant appearance that will charm visitors and residents alike, while at the same time making your house a cozy place to live in. When choosing what type of material to use in your walls, striking the right balance is crucial. Good walls should be easy and inexpensive to maintain, and at the same time contribute to your home’s visual appeal.
