can you replace mobile home paneling with drywall

by Ines Hahn IV Published 3 years ago Updated 2 years ago

Single-wide mobile homes are designed to be light, but the walls of most of them still contain wooden studs. Manufacturers often cover the walls with 1/4-inch paneling, but the studs can support drywall, so there's nothing preventing you from removing the paneling and replacing it.

Do you drywall the walls or the ceiling in a mobile home?

Most mobile homes are constructed to give an eight-foot ceiling height, so the drywall sheets should fit between the floor and ceiling. If you decide to replace the ceiling panels as well, then you should drywall the ceiling before you tackle the walls.

What are mobile home wall panels made of?

What Is a Mobile Home Wall Panel? The wall panels of a manufactured home can be made from several different material types, including drywall, porcelain tile, artificial wood and many others. The most common wall panel material in today’s manufactured homes is vinyl on gypsum, or VOG board.

Is it easy to replace a wall panel?

Fortunately, replacing a wall panel is one of the easier manufactured home repairs to DIY. The process is relatively simple, and the tools and materials are readily available from any hardware store. (Note, however, that some types of wall paneling, such as porcelain tile, are more difficult to replace than others.)

Can you put drywall over existing wall panels?

Remove all the existing wall panels and attach the drywall to the studs, or attach the new drywall sheets over the existing wall material. Both will give a satisfactory finish, but obviously, the first option involves a lot more work and material that has to be disposed of.

Can you drywall over paneling in a mobile home?

Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets, should be no problem to install.

How do you replace paneling in a mobile home?

0:231:30How To Replace A Wall Panel In Your Manufactured Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the panel adhesive on the exposed wood. And place the new panel on top amer in the finishingMoreApply the panel adhesive on the exposed wood. And place the new panel on top amer in the finishing nails to secure the panel. Step 4 add the finishing touches replace.

Is drywall too heavy for a mobile home?

Drywall that is 5/8″ thick is, of course, a little heavier, at 2.31 pounds per square foot or 73.92 pounds per sheet which is entirely too much for mobile home ceilings.

How much does it cost to remove paneling and replace with drywall?

Replacing drywall costs $2 to $3.50 per square foot, including $0.40 to $0.50 per square foot for demolition. For a 200-square-foot room, you can expect to pay $300 to $500 to remove and dispose of the old material. Removing wood paneling to replace it with drywall costs $2 to $4.50 per square foot.

How do you make a mobile wall look like a drywall?

WallsRemove all trim from the walls.Prime the walls with an oil based primer.Fill in the line gaps in the paneling with drywall mud.Tape and mud the joints between the 4 x 8 sheet of paneling.Spray orange peel texture on the walls.Prime the walls for paint with a latex primer.Paint the walls.

How do I redo my mobile home walls?

1:499:38How to Hang Shiplap on Mobile Home Walls | Remodeling a Double Wide ...YouTubeStart of suggested clipEnd of suggested clipBut as we redo the walls we are going ahead and putting in new outlets. And putting that directlyMoreBut as we redo the walls we are going ahead and putting in new outlets. And putting that directly into a stud. So the very first step that we needed to do was to remove that sheetrock.

What kind of drywall is used in mobile homes?

vinyl-on-gypsumManufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.

Will drywall crack in a mobile home?

It can flex a little. In contrast, gypsum drywall is weak and stiff. It cracks instead of bending when stressed. When the mobile home hits a bump or pothole in the road, the resulting bounce is the same as if it gained weight suddenly, and the frame flexes slightly—but the wallboard above it can't, so it may crack.

How thick is drywall in mobile homes?

Manufactured home wallboards range in thickness from 5/16” to ½”. The 5/16” thickness used to be the most popular measurement for Paper On Gypsum (POG) wallboards, but the majority of new Clayton homes with POG wallboards are now 3/8”.

Should I paint paneling or replace with drywall?

To give solid wood paneling a new look, either lightly sand and paint the wood or remove the boards and replace with drywall. If the paneling is knotty pine, be sure to use a stain blocking, oil or shellac based primer to help prevent the resin in the wood from bleeding through the paint.

Can you replace wood paneling with drywall?

Though drywall can be installed over wood paneling, this causes problems, such as having to move switch boxes and receptacles to account for the extra thickness of the wall. Removing the wood paneling is fairly straightforward and should also be done before putting drywall on the ceilign.

What can I replace paneling with?

Perhaps the most enduringly popular option for updating plain paneling is wainscoting. Wainscot is a type of paneling covering the bottom part of a wall.

How can I cover my mobile home paneling?

4:018:25How to Cover Mobile Home Seams | Drywall Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain this is just drywall tape so this has to go over the seam it makes everything adhere. BetterMoreAgain this is just drywall tape so this has to go over the seam it makes everything adhere. Better it's sticky. So the one side sticks to the wall.

Can you paint over paneling in a mobile home?

Using wood paneling in mobile homes has been very popular but it's dark and can be dreary if it's used on every wall in a room. Luckily, painting wood paneling isn't too difficult and it can give your home a whole new look in less than a day.

How do you replace wall paneling?

How to Remove Wood Panels from Wall StudsPry back the panel using your pry bar and hammer. ... Remove the panel from the wall after all nails are out.Place panels in a pile away from the project, or throw them in your dumpster.Repeat until all panels have been removed.Patch nail holes in wall studs with drywall putty.More items...•

What are the interior walls of a mobile home made of?

Manufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.

What materials are needed to replace a mobile home ceiling?

Tools and Materials Needed to Replace Mobile Home Ceilings. Drywall is one of the best materials to replace a ceiling in a mobile home but installing it on to a mobile home ceiling is a literal pain in the neck. It’s not so much the drywall that is so expensive but all the tools and other stuff you need for it.

How long is a drywall panel?

The width is always 4-foot but you can get drywall as long as 14 foot. One sheet to go across the entire width of a single wide is perfect, but a bit difficult to handle. A 10′ long panel is a little easier to maneuver and will still reduce the number of joints.

How much does a sheet of drywall weigh?

The thicker the drywall the heavier it will be. Therefore, you do not want thick drywall on your ceiling. A sheet of 1/4″ thick drywall that is 4′ x 8′ weighs approximately 38.4 lbs.

What is the most effective method of adding insulation to a manufactured home roof?

Blowing insulation into the roof cavity is the most effective and economical method for adding insulation to the manufactured home’s roof assembly.

What is the best way to finish drywall?

You can use different techniques and application methods to achieve different looks. Orange peel (also called splatter or eggshell), Mediterranian, and knockdown are all popular designs. Knockdown is an easy method of finishing a drywall ceiling.

How thick is drywall?

Drywall is available in 4-foot by 8-foot panels and four basic thicknesses: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch. The thicker the drywall the heavier it will be. Therefore, you do not want thick drywall on your ceiling.

Is drywall cut and dry?

You’ve got your drywall and all the tools and materials and you are ready to roll. Hanging drywall is fairly cut and dry (it’s the taping and mudding that can get make you or break you).

What Is a Mobile Home Wall Panel?

The wall panels of a manufactured home can be made from several different material types, including drywall, porcelain tile, artificial wood and many others. The most common wall panel material in today’s manufactured homes is vinyl on gypsum, or VOG board. VOG panels are a widely used and cost-effective building material used in manufactured homes, and when properly cared for, they can last for decades.

How to get replacement wall panels?

To get a replacement wall panel that matches your home’s current panels, contact the manufacturer of your home. The manufacturer will be able either to provide you with a replacement panel from the same series or the closest available equivalent. Keep the serial number of your home handy during this process so that the manufacturer can track your ...

What is the most common wall panel material in manufactured homes?

The most common wall panel material in today’s manufactured homes is vinyl on gypsum, or VOG board. VOG panels are a widely used and cost-effective building material used in manufactured homes, and when properly cared for, they can last for decades. However, it’s not uncommon for wall panels to become damaged.

How to attach a panel to a wall?

Mount the panel onto the adhesive and fasten it in place using finishing nails.

How to get studs off a wood panel?

Use your fist (or a rubber mallet) to strike the panel until you find the studs. This will also help loosen the glue and batten strips on the panel.

Can you replace a wall panel in a manufactured home?

Replacing the wall panel of a manufactured home is a surprisingly simple process that someone with basic DIY knowledge can accomplish in an afternoon. In this article, we’ll discuss what a manufactured home wall panel is made from, the materials and tools needed to replace one and the process of replacing a panel.

Where is the serial number on a manufactured home?

The serial number is located on your manufactured home data plate, which you’ll typically find inside a cabinet, closet or utility area somewhere in your home.

What does vertical paneling do to drywall?

You may be shocked at how good this one painted paneling wall looks. The vertical lines in the paneling can add character and depth to the otherwise flat surface you'll get when you drywall.

How long does it take to add drywall?

It would take days to add drywall and make all of the necessary carpentry changes for the drywall to work. PHOTO BY: Kathleen Connick with Tim Carter's camera. Try to make sure the added lumber sticks about 1/32nd of an inch past the finished surface of the drywall.

How thick should drywall be for soundproofing?

I'd use drywall that is at least one-half inch thick and would seriously consider using 5/8 inch drywall on walls and ceilings where I want sound transmission to be minimal. Thicker drywall helps soundproof rooms.

What to do if your wife is stuck on drywall?

If you and your wife are stuck on drywall, then you need to choose the thickness you want and make adjustments to the jambs at each door and window after the drywall is installed.

What bleach removes wax from wood paneling?

The Stain Solver oxygen bleach will do an amazing job of removing any wax or polish previous homeowners may have applied to the paneling.

How far can a box edge be from a finished wall?

But the code understands this can be tough to achieve and typically the maximum distance the box edge can be away from the finished wall is only 1/4 inch. But check with your local code authorities for the exact distance.

Can you fill cracks in paneling?

If the vertical lines or grooves in the paneling bother you or your wife, you can also fill them with spackling compound. It may take several attempts to get the cracks filled so they are perfectly even with the paneling, but it is far less time than you will spend installing and finishing the new drywall.

How high should a mobile home ceiling be?

How to smooth out knife marks on drywall?

Any knife marks can be smoothed out by wiping over the joint with a damp sponge once the compound has begun to set. Once all the drywall is complete, re-install all the outlet and wall switch covers. Any molding and baseboards that can’t re-installed will need to be completely replaced.

What to do if studs don't line up?

If the studs don’t line up exactly with the edges of the sheet, or there is not enough stud to attach the sheet using screws, use some mobile home drywall adhesive instead. Continue working around each room until the drywall installation is complete.

Do mobile homes have drywall?

This makes for better wall-to-ceiling joints since the wall boards will be secured tight to the ceiling boards. Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, ...

Do you need to conceal drywall joints for painting?

To smooth the drywall surface for painting the joints and fasteners need to be concealed.

How much does it cost to replace wood paneling with drywall?

The average cost to replace wood paneling with drywall is approximately $2 to $4.50 per square foot. This cost largely depends on how long it takes to demolish the wood paneling. Thinner panels are easier to remove, while thicker panels may take longer.

How much does it cost to install drywall?

Installing drywall ranges between $1 and $3 per square foot. To get a better price for the job, you should hire contractors that can demolish the wood panels and install drywall. Getting separate professionals for the job may be quite costly because each expert will give you their own estimate.

Is Drywall more expensive than paneling?

Although installing drywall is a comprehensive project, it may be relatively cheaper than paneling. This is because wood paneling requires more attention for cutting and trimming. More so, the project may take more time to install and cost more than drywall.

What is the cheapest material for a wall?

Drywall is one of the cheapest materials for interior walls. One sheet goes for about $9 to $15, depending on its size and installation cost per square foot. Other more affordable options include wood planks, plywood, and plastic panels. To determine the cheapest option, you can ask for a quote for each wall material. Before you select any interior wall material, consider its longevity, insulation, and soundproofing first.

What is the best material for a ceiling?

These include drywall , pegboard, veneer plaster, cement board, and plastic panels. Drywall is one of the best materials for ceilings and walls. It is inexpensive and durable, making it a top choice for most homeowners. Instead of replacing your wood paneling, you can revamp it to give your home a whole new look.

Can you remove wood panels yourself?

To get a better price for the job , you should hire contractors that can demolish the wood panels and install drywall. Getting separate professionals for the job may be quite costly because each expert will give you their own estimate. You can remove the panels yourself to reduce the total project cost if you have time.

Is it Cheaper to drywall over wood paneling?

Yes, it is relatively cheaper to drywall over wood paneling because you will not incur demolition costs. Demolishing wood panels ranges between $0.33 and $0.55 per square foot on average. The price can be as high as $1.0 per square foot if the panels are thicker.

What is a mobile home wall?

Mobile home walls come in many different materials which can change the way your living room looks, regulate the temperature of your house and affect how easily it can be repaired or replaced. What type of wall is ideal for you will depend on many factors like the size of your house, your budgetary constraints, and the place where you live.

What are the materials used in mobile home walls?

But when it comes to striking that perfect balance between aesthetic appeal, price, and functionality no other materials come close to reaching it as artificial wood, drywall, ceramic tile and plaster.

Why are ceramic tile walls so hard to move?

Perhaps the biggest drawback to ceramic tile walls is that they are difficult, if not impossible, to transport. Being so hard they have a tende ncy to break if the wall is experiencing too much vibration, like that caused when removing a wall or when a truck is towing a mobile through a difficult road.

What is drywall made of?

Drywall is another popular material which can be found in many homes, mobile or not. Drywall panels are made using gypsum plaster which is then pressed into a vertical frame to make a drywall. This type of wall evolved as a simpler, quicker alternative to the traditional lath and plaster walls. While a plaster wall may take up to a week to get dry, even an amateur carpenter can set up a drywall and have it ready in two days.

What is the best material to paint a mobile home?

Ceramic tiles are a popular material used to finish mobile home walls thanks to its durability and visual appeal. Ceramic tiles come in many shapes, sizes, colors and designs, which gives decorating enthusiasts plenty of options to use when designing their homes.

What is artificial wood paneling?

Artificial Wood Paneling. Older manufactured homes that were built around 1960 and 1970 tend to be built with artificial wood paneling. These mobile homes were the type that went up like tinder boxes, before industry standards were in place. Image Credit: Houzz.com. Artificial Wood is a composite material made using wood byproducts, ...

What is a good wall material?

A good wall material should balance both its practical functionality and its aesthetic appeal, giving your home a pleasant appearance that will charm visitors and residents alike, while at the same time making your house a cozy place to live in. When choosing what type of material to use in your walls, striking the right balance is crucial. Good walls should be easy and inexpensive to maintain, and at the same time contribute to your home’s visual appeal.

What are VOG wall panels and why are they used in mobile homes?

VOG stands for Vinyl on Gypsum (or vinyl over gypsum). Gypsum is calcium sulfate dihydrate, a soft and lightweight white or gray chalk-like mineral.

What to use to paint mobile home walls?

Using high-quality brushes and rollers is another popular recommendation from homeowners that have painted their mobile home walls successfully.

Why do people use VOG panels in their mobile home?

VOG panels are used because they are lightweight, water resistance, easy install, clean, and maintain. Below you can see low-gloss vinyl wallboards used in a manufactured home bathroom: Image Source: ths.gardenweb.com.

What is a VOG panel?

Vinyl on gypsum (VOG) panels has a laminated-like coating that holds the gy psum together. It’s used in mobile homes because it repels water, ...

How many coats of paint should I use for a VOG?

CDS, a large VOG manufacturer, recommends an oil primer with two coats of alkyd or latex semi-gloss enamel paint: Two coats of alkyd or latex semi-gloss enamel. Oil primer with a finish coat of oil paint or flat latex. Two coats of flat oil paint.

What does knowing which company manufactured your home's VOG panels do?

Knowing which company manufactured your home’s VOG panels will help you determine their recommended paint and primer. Unfortunately, not all homeowners have access to that information so a little guessing is required.

Why use dry wall compound?

Drywall compound is used most often to add texture because it’s affordable, easy to get, easy to work with, and easy to clean.

Why are mobile homes made with dry wall?

Mobile homes are made with pre-wallpapered dry wall, then matching strips are made to hide the gaps, because they’re made as quickly and cheaply as possible. Plus moving a house creates all kinds of problems, so this also helps to eliminate cracking of dry wall compound in said joints. I hate those strips.

Why do mobile homes have drywall strips?

How many living rooms does a mobile home have?

Most mobile homes have 2 living rooms. My double wide does. I feel it is kinda of a wasted space because we don’t use it much. I LOVE my house!!!