How do I apply Rubio monocoat?
Applying Rubio Monocoat 1 Prep the surface 2 Spread the Finish 3 Buff the Finish 4 Remove the Excess
Is Rubio monocoat hard to maintain?
She is interested in using Rubio Monocoat, but the pros are telling her that the upkeep and maintenance will be difficult and time-consuming. My experience has been that the floor sealed with Rubio is not more difficult to maintain than poly-covered hardwood. Run the robot vac daily or near-daily to control pet hair.
What grit of sand should I use with Rubio?
Rubio usually recommend not sanding past 150 because the oil binds more effectively at lower grits. I sand to 180 and haven’t found it to be a problem. After 180, water-pop the surface by spraying liberally with water. After it dries, sand lightly again with 180 to knock down the raised grain.
How much cleaning solution will one liter of Rubio monocoat soap make?
One liter of Rubio Monocoat Soap will make approximately 26 gallons of cleaning solution. When Rubio Monocoat soap is mixed with water into a cleaning solution, it is called Surface Care Spray. Mix Rubio Monocoat Soap with water at a ratio of 1:100. Surface Care Spray is the mixed and ready-to-use version of Rubio Monocoat Soap.
How do I fix my Rubio Monocoat?
Spot RepairsSand the repair area as needed to remove damage and expose raw wood.Dampen the area with water. Allow to completely dry.Apply with a cotton cloth, the same color oil that was used originally to coat the floor.Let it react for 10 minutes. Wipe the excess oil off with a cloth, dampened with Monocoat Oil.
Can you apply 2 coats of Rubio Monocoat?
Because the product will not bond to itself, multiple coats are not needed. On softer species like walnut, a second application may be necessary to make sure that all areas have fully had the opportunity to react with the oil.
How do you wipe a Rubio Monocoat?
2:4914:18How to Apply Rubio Monocoat to Furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut also helps drive it deeper into the wood. The final step is to remove all traces of finish fromMoreBut also helps drive it deeper into the wood. The final step is to remove all traces of finish from the surface. I use a small buffer with a terry cloth bonnet installed.
Can you Poly over Rubio Monocoat?
Yes, but only on vertical surfaces and furniture. We recommend Oil Plus 2C for interior wood floors.
Does Rubio Monocoat fill holes?
It is suitable as a wood filler for filling knot holes, cracks, nail holes, and most gaps.
Is Rubio Monocoat waterproof?
Very wear-resistant. Water- and heat-resistant, ideal for kitchens and bathrooms. Very fast curing: 80% in 2 days. A short 'dry' maintenance period: after 5 days, the surface can be cleaned with water and soap.
How long do you let Rubio Monocoat sit before wiping?
Clean the surface using Raw Wood Cleaner. The technology of Oil Plus 2C enables it to make a molecular bond with the wood fibers in 3-5 minutes. If dust is present, the oil will bond to the dust instead of the wood fibers, creating microscopic paste on the working surface. Allow to dry (approximately 15-60 minutes).
Does Rubio Monocoat need maintenance?
Caring for a Rubio Monocoat Surface. Rubio Monocoat oils are easy to maintain. Maintenance following our recommendations does not require sanding and, of course, maintains the surface so it will not need to be completely re-sanded and refinished.
Can you put top coat on Rubio Monocoat?
Rubio Monocoat Oil UV Topcoat R2 is applied as an extra protective layer over the Rubio Monocoat Oil UV R2. It intensifies the colour of the Rubio Monocoat Oil UV R2 and when brushed prior to drying, increases the sheen. Excellent yield: 4 - 7 g/m2. Retains the natural look of the wood.
Does Rubio Monocoat yellow over time?
The oil can also produce a warm, amber or yellowish tint over time, which can change the look of the wood.
Is Rubio Monocoat a hard finish?
One of the newest additions to the wide range of finishes is Rubio Monocoat. It's a hard-wax oil finish that goes on easily and, unlike standard polyurethane finish, actually permeates the wood itself rather than simply creating a protective barrier on top of it.
Can you use mineral spirits with Rubio Monocoat?
Can you use mineral spirits before Rubio Monocoat? You can use mineral spirit before Rubio Monocoat; Rubio does not recommend using mineral spirit before it. You can use Rubio Raw wood cleaner before using a monocoat finish.
How do you apply Rubio 2 coats?
3:1810:10How to Finish a Table - How to Apply Rubio Monocoat - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure all the areas look like they've absorbed as much as they possibly can and after about fiveMoreMake sure all the areas look like they've absorbed as much as they possibly can and after about five to ten minutes we're going to come back and wipe all of it off and rubio. Always.
How do you reapply Rubio Monocoat?
0:070:56Rubio Monocoat Renew - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf color has faded renovate. Using oil plus to see in the original. Color once fully cured surfacesMoreIf color has faded renovate. Using oil plus to see in the original. Color once fully cured surfaces with renew can be cleaned using surface.
How long does it take Rubio Monocoat to dry?
The oil will cure in 7 days. The floor, fixture, or furniture is useable after 24 hours and can be cleaned with liquids within a week. There is much less chance of spotting, scuffing, etc. during the cure period, because the curing time is 7 days as opposed to 21 days.
Can Rubio Monocoat be used without accelerator?
Although Part A is available without the accelerator, we strongly recommend the use of the component system - Rubio Monocoat Natural Oil 2C Parts A & B - since the oil will cure in 7 days rather than 21 days, virtually eliminating spotting, scuffing, etc. during the cure period. Learn more.
What is your return policy?
Please view our Return Policy.
What are your shipping options?
We provide a variety of standard UPS shipping options. The options available to you will display during the checkout process.
How do I edit or cancel an order?
Once your order has been fulfilled and a tracking number has been created (an email with tracking info will be sent to the email associated with th...
Do you ship internationally?
We at Rubio Monocoat USA only service the United States. For international inquiries, please contact the Rubio Monocoat nearest you for assistance...
What do I do if I have not received my order?
If you do not receive your order, please review your delivery time-frame. Certain items and locations have a longer time-frame.Locate your tracking...
Where can I buy Rubio Monocoat?
Rubio Monocoat is available to purchase direct online via www.rubiomonocoatusa.com.You can also find the closest authorized dealer near you via our...
Where are you located?
We are located in Austin, TX.
Where is the product manufactured?
Izegem, Belgium.
How many coats are required?
We are a Monocoat ;)One coat is all that is required.
Do you have a color chart to show customers?
Yes, we have several ways to show colors to customers:• Fans Decks are available for purchase.• You can view colors on our Colors page.• Download a...
How many gallons of Rubio Monocoat soap?
Rubio Monocoat Soap is extremely concentrated, and therefore, extremely economical. One liter of Rubio Monocoat Soap will make approximately 26 gallons of cleaning solution. When Rubio Monocoat soap is mixed with water into a cleaning solution, it is called Surface Care Spray. Mix Rubio Monocoat Soap with water at a ratio of 1:100.
How long does Rubio Monocoat 2C take to cure?
Once your floor is finished with Rubio Monocoat Oil Plus 2C, you should allow at least 5 days for it to fully cure before cleaning with liquids.
What is surface care spray?
Surface Care Spray is the mixed and ready-to-use version of Rubio Monocoat Soap. It is available in an easy to use spray bottle. Surface Care Spray is great to have on hand for spot cleaning areas in the event of a spill or accident.
What is the best cleaner for Rubio oil finish floors?
Surface Care Spray or properly diluted Rubio Monocoat Soap are the only recommended cleaners for your Rubio Monocoat oil finished floors. These cleaners will remove all dirt and grease thoroughly, without leaving a film or affecting the matte natural look of the wood. Again, be sure to only damp mop and not saturate the floor with liquid.
What is Rubio Monocoat Oil Plus 2C?
Rubio Monocoat Oil Plus 2C is a natural and environmentally friendly oil. It creates an extremely durable finish and enhances the natural beauty and grain of wood flooring.
How long does it take for Universal Maintenance Oil to dry?
Universal Maintenance Oil dries in approximately 6-8 hours, at which time it is ready for light use. Full cure is achieved after 6 days. Universal Maintenance Oil is available in 5 colors: Pure (non-pigmented), Black, Brown, Grey and White.
Is Rubio monocoat oil sustainable?
Rubio Monocoat oil is composed of natural ingredients. It is sustainable, renewable, and completely environmentally friendly. Since no artificial toxic hardeners are used to increase the durable life of the finish, periodic rejuvenation (aka maintenance) is necessary, usually between 2 and 6 years, depending on climate, use, and care. Maintenance is done using Renew.
What is Rubio Monocoat?
Rubio Monocoat oil forms a molecular bond with the topmost microns of the wood. A knife can cut deeper than the product penetrates, leaving raw wood exposed and susceptible to mold and/or bacteria growth.
How many coats are needed for a sandbox?
One coat is all that is required.
Can you use surface cleaner on over the counter?
No, most over the counter cleaners have solvents or caustic qualities that could strip the protective properties of the finish. We only recommend using Surface Care Spray when cleaning.
Can Rubio be used on wood?
Yes, Rubio WoodCream can be applied on all wood species.
Can you modify a rubiomonocoat order?
Once your order has been fulfilled and a tracking number has been created (an email with tracking info will be sent to the email associated with the order), we are unable to modify the order. If your order has not been fulfilled, please email us at [email protected] with your order number and requested changes. Replying to the order confirmation email is easiest.
Can Rubio wood veneer be used on vertical wood?
Yes, Rubio WoodCream is only intended for vertical wood surfaces.
How does Rubio work?
The way Rubio works, the wood takes what it wants and anything else left on the surface is just a liability as it tends to get sticky and gummy. So after the cleanup step I’ll take a clean cotton cloth and quickly go over the surface one last time.
How long does it take for Rubio to cure?
By the way, you don’t have to use the accelerator. The finish will just take longer to cure: 3 weeks vs 7 days with the accelerator.
How many steps are there in Rubio?
Applying Rubio is a simple 4-step process. The tools and techniques you use to accomplish these steps can vary.
Can Rubio sand past 150?
Rubio usually recommend not sanding past 150 because the oil binds more effectively at lower grits. I sand to 180 and haven’t found it to be a problem. After 180, water-pop the surface by spraying liberally with water. After it dries, sand lightly again with 180 to knock down the raised grain.
