can you solder copper pipe with propane

Should you use propane or MAP gas when soldering copper pipe?

When sweating or soldering copper pipe, we’ve been asked about using either propane or MAP gas. In truth, both types of fuel will get the job done. The main difference between propane or MAP gas is that the MAP is hotter. What that translates to is you will heat up the pipe quicker allowing you to solder faster.

Can you use copper pipe for propane line?

Copper Line Considerations. In 1999, the International Association of Plumbing & Mechanical Officials (IAPMO) designated that copper tubing and fittings are allowable for gas-distribution systems, including propane. However, some individual states still have limitations on copper use for gas distribution tubing.

Is it better to solder pipe fittings?

If you can heat up the fittings quickly, you will actually be heating up less pipe area. This can make things better when working near valves. Also, since lead-based solder is not code-compliant for domestic water systems, the tin and silver-based solder take a little more heat to get them to flow.

What kind of solder do you use to solder water valves?

This can make things better when working near valves. Also, since lead-based solder is not code-compliant for domestic water systems, the tin and silver-based solder take a little more heat to get them to flow. MAP gets the job done quicker for this as well.

See more

How do you solder copper pipe with propane torch?

0:041:40How To Properly Heat Up Copper Pipe Using A Propane TorchYouTubeStart of suggested clipEnd of suggested clipYou want to heat up the fitting. Because when you heat the fitting up and have spikes and stuff toMoreYou want to heat up the fitting. Because when you heat the fitting up and have spikes and stuff to flex to pull masada. Into the fitting when you sweat in the pipe to gala.

Can you solder 1 copper with a propane torch?

0:002:17How to Solder Copper To Copper with a Propane Torch and Hide the ...YouTubeStart of suggested clipEnd of suggested clipYou can add the flux cold or after the copper has been heated with a flame or heat gun. Just waitMoreYou can add the flux cold or after the copper has been heated with a flame or heat gun. Just wait for the liquid flux to turn brown then add the rod. Just like that.

Will propane work for soldering?

When sweating or soldering copper pipe, we've been asked about using either propane or MAP gas. In truth, both types of fuel will get the job done.

Is propane corrosive to copper?

In 1999, the International Association of Plumbing & Mechanical Officials (IAPMO) designated that copper tubing and fittings are allowable for gas-distribution systems, including propane.

Will a propane torch melt solder?

Swab a little flux around the end of the tubing and inside the ends of the elbows and then push the joint together. I used a common everyday, readily available propane torch to solder the copper tubing together. You can get a cylinder of propane and the torch at any big box home improvement or hardware store.

Can you use a butane torch to solder copper pipe?

Butane Torch: Butane torches can provide temperatures of up to 2,610°F and can join a copper pipe two inches thick. Since copper soldering with a butane torch can take about 25 seconds—considerably longer than MAPP or propane torches—it's best for soldering projects.

Is butane or propane better for soldering?

Typical Use. A butane torch is much more compact and portable, but the flame is weaker. Hence, a butane torch is mostly used for soldering metals like silver, drying wet materials like clay or cement, and heat-shrinking tubing and wiring. A propane torch comes with a larger tank to store propane.

What gas is best for soldering?

Use MAPP gas to speed up the job MAPP gas torches burn hotter than propane, making them a better choice for modern solder. Five to 10 seconds of heating with a MAPP gas torch is all that's required before you can feed solder into most 1/2- to 3/4-in. pipes and fittings.

How hot does propane get?

3,600 degrees FahrenheitPropane fuel has an in-air flame temperature of 3,600 degrees Fahrenheit.

Can I use SharkBite for propane?

You may damage the pipe if you use sharp instruments to open the SharkBite® PEX packaging. Don't use natural gas, propane, fuel oil, or any other fluid, chemical or product with it. The SharkBite PEX tubing is not approved or intended for any other use.

What type of copper tubing is never approved for use with propane?

Designers and installers should be specific with size designations in their references and when ordering. Copper and copper alloy tube (except tin-lined copper tube) should not be used if the gas contains more than an average of 0.3 grains of hydrogen sulfide per 100 standard cubic feet (scf) of gas (0.7 mg/100 L).

What type of copper pipe is used for propane gas?

The types K and L copper tube and ACR tube have been used in fuel gas systems for many years. Type L is used for interior distribution systems whileType K is used for underground lines.

What is the difference between propane and MAP gas?

In truth, both types of fuel will get the job done. The main difference between propane or MAP gas is that the MAP is hotter. What that translates to is you will heat up the pipe quicker allowing you to solder faster.

Is lead solder safe for water?

Also, since lead-based solder is not code-compliant for domestic water systems, the tin and silver-based solder take a little more heat to get them to flow. MAP gets the job done quicker for this as well.

Can you use propane torch heads with MAP gas?

There needs to be caution exercised because most torch heads designed for propane are not compatible with MAP gas unless clearly indicated on the torch head. Make sure you understand which tools to use before attempting to switch from one to the other.