Yes, you can fix an invisible fence by splicing in an unbroken wire. In fact, there are many invisible fence companies that sell invisible fence wire splicing kits just for this purpose. If you don’t have one of these kits, though, you should make sure that you purchase a 14 or 16-gauge wire that’s not only rated to be used underground, but that’s also waterproof.
Full Answer
Can you fix an invisible fence by splicing in unbroken wire?
Yes, you can fix an invisible fence by splicing in an unbroken wire. In fact, there are many invisible fence companies that sell invisible fence wire splicing kits just for this purpose.
Can You patch an invisible fence?
You may actually be able to pick up a patch kit from your invisible fence dealer, but even if you can’t you can purchase the wire on your own and create your own splice. As you might imagine, the best-case scenario never involves wire repairs at all.
How do invisible fences work?
While there are certainly many different brands of invisible fences on the market, any of them that use the traditional wired components are going to rely on this part to work. In addition to the wire, the fence will make use of a transmitter that’s usually mounted somewhere in your home, which sends a low-frequency radio signal through the wire.
Can a dog be outside a fence?
If your dog has been trained properly, the only reason your pup would be outside the fence is if the wire breaks. These can be buried or kept above ground. If your fence system breaks, There’s no need to worry. This guide will teach you how to repair an invisible fence wire. Quick Guide: How To Repair An Invisible Fence Wire
How do you splice invisible fence wires?
0:482:56How to fix a wire break in an Electric Dog Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that half an inch of copper wire is exposed on. Each. Then twist the two copper wire endsMoreSo that half an inch of copper wire is exposed on. Each. Then twist the two copper wire ends together grab an orange wire nut from the proper splice kit and twist it on until snug.
Can you splice an invisible fence?
The Splice Kit includes: You can easily repair any wire break in your Invisible Fence® Brand outdoor pet protection system.
Can you splice underground electric fence wire?
When splicing the dog fence wire, all you need to do is twist the two exposed ends together, insert them into the gel-filled capsule and close the splice lock. The cylinder of the underground wire splice contains a mixture of silicone and grease, which helps to secure the waterproof connection.
Can electric fence wire be spliced?
Splices are usually needed as you come to the end of one spool of electric poly wire, but you still need to extend the fence. They allow you to link the polywire from one spool to the next. Secondly, polywire sometimes breaks and the de-energized section of fencing needs to be quickly re-established.
How do you fix a broken electric fence wire?
0:519:19How Do I Repair and Fix a Break in Dog Fence Wire? - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically butterfly twist the wires together and twist. Them just a butterfly twist there. Now theMoreBasically butterfly twist the wires together and twist. Them just a butterfly twist there. Now the real secret. We run some of our wire across here. And we're just gonna hit it with that shovel.
How do you waterproof splice wires?
1:003:26How to Waterproof Electrical Connections - 3 Ways - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply. Use a razor to cut off a length of tape that you'll need when wrapping the connectionMoreSimply. Use a razor to cut off a length of tape that you'll need when wrapping the connection applied two-thirds. Overlap. This tape will fuse on both sides. And once cured it will remain flexible.
What kind of wire do I need to repair an invisible fence?
Description: Invisible Fence® Brand pet containment systems uses a direct burial single copper wire protected by a thick outer sleeve of insulation to establish the boundaries of your dog's underground fence.
What gauge wire is invisible fence?
20-gauge wire is what you will find in most pre-packaged do-it-yourself fencing kits. Most professionally installed systems use the more substantial 14 or 16 gauge wire.
How do you splice boundary wires?
How to splice wireStrip 3/8 inch of insulation from the end of each wire.Twist the exposed wire together.Twist a wire cap over the wires. Tie a loose knot in the wire to help secure the wires.Insert the wires into a splice capsule, then close the capsule.
Does an electric fence have to make a complete loop?
Does an electric fence have to make a complete loop? The short answer is: no. For an electric fence to be properly installed it should not be a closed loop. When an animal touches the electric fence, this should be the missing link in the loop for the animal to get the shock.
How do you splice fence wires?
0:152:47HOW TO Splice Woven Wire Fence - With Just Pliers - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you have the first vertical wire on both sides. Cut you're going to pull off these littleMoreAfter you have the first vertical wire on both sides. Cut you're going to pull off these little vertical wire sections.
How do you splice Poly electric fence wire?
0:241:13The basics of connecting poliwire | Patriot - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can take that wire and braid it back twist it back upon itself that'll give it a nice solidMoreYou can take that wire and braid it back twist it back upon itself that'll give it a nice solid connection onto your wire and still keep a nice.
How do you fix a broken invisible fence?
0:002:40Fixing a Break in Your Invisible Fence wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the first thing I do is tighten tie that wire with a square knot. To the to both ends of theMoreAnd the first thing I do is tighten tie that wire with a square knot. To the to both ends of the broken. Wire. Now there's plenty of slack.
What gauge wire does Invisible fence use?
20-gauge wire is what you will find in most pre-packaged do-it-yourself fencing kits. Most professionally installed systems use the more substantial 14 or 16 gauge wire.
How do you fix an invisible dog fence?
2:3814:50EASY Fix - underground Dog fence Wire - Invisible Fence repairYouTubeStart of suggested clipEnd of suggested clipOr you can use a wire nut like this now these are special wire nuts because inside of these wireMoreOr you can use a wire nut like this now these are special wire nuts because inside of these wire nuts there is a silicone sealant. So it keeps corrosion down and keeps the water out.
How do you splice boundary wires?
How to splice wireStrip 3/8 inch of insulation from the end of each wire.Twist the exposed wire together.Twist a wire cap over the wires. Tie a loose knot in the wire to help secure the wires.Insert the wires into a splice capsule, then close the capsule.
How do you repair a broken invisible fence?
It depends on what part of the fence is broken. If the wire is broken, it's actually fairly easy to fix the problem. First, bring your pets inside...
Can invisible fence wire be repaired?
Invisible fence wire can be repaired. This is routinely done by invisible fence installers and the process is actually fairly easy for anyone who h...
Can you splice invisible fence wire?
Yes, you can fix an invisible fence by splicing in an unbroken wire. In fact, there are many invisible fence companies that sell invisible fence wi...
Why is my invisible fence unit beeping?
The most common reason why an invisible fence transmitter unit will be beeping is that there is a break somewhere in the wire. While there are some...
How Do You Fix a Broken Invisible Fence Wire?
Once you find the break, remove the insulation and twist the copper wires together. Then use electrical tape to cover the ends and keep the wires f...
How Do I Find a Broken Invisible Fence Wire
If you cannot see an obvious cause like roots or a dug-up dog fence wire, you can use either the collar or a handheld radio to find the wire break....
What Gauge Wire is Used for Invisible Fence?
Many commercial dog fences use a 20 gauge dog fence wire. Professionally installed fences may use a 14 or 16 gauge since these can be sturdier. If...
How to walk around an invisible fence?
Once you have an idea of where the wire is located, keeping walking along a straight line until you no longer get a signal. Drop a flag at that point, and then walk in another direction to see if you get a signal from the receiver. You can follow this same process to walk out the length of your invisible fence and mark out exactly where it is located. If you don’t want to leave your markers permanently, make sure that you do this job every time you know someone is going to be working anywhere near the wires to prevent unwanted breakages.
Why does my invisible fence beep?
The most common reason why an invisible fence transmitter unit will be beeping is that there is a break somewhere in the wire. While there are some modern units that will actually inform you about this through text, a simple alarm is still the most common way to alert a fence owner. It’s a good idea to familiarize yourself with the owner’s manual of your invisible fence, though, as some units have multiple types of alarms, and knowing exactly what sounds your transmitter is making or what color lights are flashing can tell you a fair bit about what problem you are facing.
What to do if you can't see a wire break?
If you can’t visually locate the wire break, you’ll need to buy an underground wire locator tool. These tools are very easy to use and can be bought both online and at big box hardware stores, so don’t be afraid to make a purchase. The good news is that you will probably get a lot of use out of this tool over the years.
What kind of jobs can break a fence wire?
So, what kind of jobs can break a fence wire? Aeration is a big culprit, as is tree removal. Edging your lawn can cause problems if your wires are above ground, though, as can shoveling snow. Bigger projects like installing sprinkler systems or building a deck can also cause issues, so make sure that you inform anyone who is working on your lawn as to where those wires can be found.
What to do when your dog breaks a wire?
The most important thing you can do when you find out about a wire break is to bring your dogs back to a safe place. While there are definitely many dogs who are well-trained enough that they won’t try to cross the boundary lines even when the system is off, it’s always smarter to keep your pet as safe as possible.
Can you patch an invisible fence?
Once you find the place where the wire has broken , you’ll need to splice in the right kind of wire to repair the break. It’s generally recommended that you use a 16-gauge wire for this task, specifically one that’s rated to be buried underground and that’s waterproof. You may actually be able to pick up a patch kit from your invisible fence dealer , but even if you can’t you can purchase the wire on your own and create your own splice.
Where do wire breaks occur?
The good news is that some of the wire breaks that occur are fairly easy to spot. Breaks might occur near a driveway or sidewalk, for example, and you’ll be able to spot them right away. The bad news, though, is that most breaks aren’t going to be nearly as easy to spot. You’ll need to look around your property for areas that might be problem spots – gardens are a good culprit, as are any areas where you know animals dig. Check around trees as well, as growing roots can cause problems.
How does a dog fence wire fail?
In the dog fence world, we recognize this effect and are aware that even a bad splice, or open nick or scrape on a wire will fail slowly as long as there is a steady low voltage energy supplied to the wire. However, once that voltage is removed ( ie. the wire is cut clean thru and separated, or the unit is unplugged from the power source) then a wire quickly fails, and not only in the spot where it was cut, but in all places with exposure to the environment. Some places will fail quicker than others, depending on the micro-environment of that troubled wire spot. This is why when a wire gets cut we will often find multiple breaks and bad splices during a service call. While you waited three weeks to call because the dog wasn’t leaving the yard yet, or in the two hrs it took us to get there, electrolysis occured and your apparently good wire, suddenly blew up into two or three wire cuts and a few bad splices from the cable or phone company.
How does wind affect a bad splice?
Wind also exacerbates a bad splice situation when the bad splice is near a tree that can move as the tree sways a little. Gentle swaying rocks the ground in the vicinity of the tree. This slight movement shifts the ground around a tiny break, or bad splice. Continuous pulling of the wire just a tiny bit, over and over again can cause a splice to separate, or a nick to break or pull and relax, pull and relax. Connect, disconnect, connect, disconnect.
Why does my fence stop working?
This happens when an improperly spliced line gets moisture into the splice causing corrosion between the two wires. Corrosion creates resistance and weakness in the line. High resistance causes a wire break alarm to trip, and the weakness of the splice can cause it to pull apart.
How does a nicked wire affect the ground?
Another way a nicked line can affect us is that sometimes after a wire pulls apart and breaks, it can also move back together as the ground shrinks and expands, over and over. The close proximity of the two wire ends and the electrical current in the line carried across a short distance (thanks to moisture and sometimes even high conductivity levels of some soils is sufficient to allow the fence to operate again.
What happens if you expose a wire to the sun?
Sun exposure to the wire casing can damage non-UV protected wire casing. This damage allows water to penetrate and react with the metal.
Why is it important to fix a fence?
This theory is important because once a fence fails from one event, by the time we get it fixed, we often find many old damaged areas that have failed at nearly the same time, or shortly thereafter, and for weeks and months after the main disruption. We always hear the same thing from our customers… “You were just out here to fix our fence, and it is beeping again.” Now, re-read that statement this way: “you didn’t fix my fence”.
What does it mean when a wire break alarm goes off?
Facts to know: 1) Just because the wire-break alarm is going off, it does not mean that the signal is not being sent down the line. (Probably the case in all systems, but there could in theory be a signal “shut off” algorithm in some products) 2) Sometimes a fence is installed using two ground rods.
