Can you paint or stain Ipe?
First, sand the ipe with coarse-grit sandpaper to rough up the surface a bit. This will give the paint something to cling to. Then, apply several layers of oil-based primer. Finally, you can paint the ipe, but use an oil-based paint instead of the usual latex stuff.
Should I stain my Ipe deck?
Do you need to stain Ipe? No, you do not need to stain Ipe. However, if you want it to stay brown, red, and dark you will need to apply a U.V. Coating.
How do you apply stain to Ipe wood?
Most of the IPE Deck Stains can be applied using a brush, roller, pump, or airless sprayer. Be sure to cover plants, windows, concrete, or any areas that you do not want to get the stain on. Allow the IPE Wood Stain to penetrate the surface for several minutes before wiping away the excess stain.
How long does Ipe need to dry before staining?
1 dayIpe should dry for 1 day before staining. Be sure to check the weather prior to beginning your staining project. Ipe Hardwood Finish can be applied using a brush, roller, pad applicator, or sprayer. Stain the entire length of one or two boards at a time before moving to the next.
What is the best stain for ipe?
To find the best TWP stain for IPE look no further than the 100 Series formula. TWP 100 is the ultimate choice for IPE wood's dense nature. 100 Series has outstanding penetrating capabilities to help avoid UV fading, discoloring, cracking, and board warping.
What kind of stain do you use on ipe wood?
You can use either an oil-based or water-based stain on the Ipe, but oil-based tends to absorb better into the wood.
Should I sand or pressure wash ipe deck?
If ever you skipped maintenance for a longer period of time and the wood has become grey, we recommend a good pressure wash (Saicos Wood Brightener works well). Let it dry for a day or two, then give it a light sanding to smooth and remove any remaining grey spots - and is ready to oil, very simple.
How do you keep IPE looking new?
Ipe decks should be regularly kept clean of dirt and debris. Sweep leaves off the deck, don't let rusting items sit on the wood, and hose off mud or spills. You can use a hose to safely clean off your deck but be careful when using a power washer.
How do you keep ipe wood looking new?
Wash your Ipe wood surfaces with a nylon bristle brush or soft towel and Penofin® Pro-Tech Wood Cleaner to remove surface dirt, scrubbing in the same directions as the grain of the wood, then rinse off with water. Once complete allow to dry. In a pinch, you may use mild dish soap, then rinse clean with water.
Can you leave ipe wood untreated?
Do I have to seal Ipe wood? No, but you really should. During the initial exposure of your Ipe decking or hardwood siding on site, weather, especially UV rays, take a toll on outdoor woods. Putting a coat of UV inhibitive sealer on exterior hardwoods is a great idea.
Can you use Thompson water Seal on ipe?
Q: On what type of woods should I use Thompson's® WaterSeal® Penetrating Timber Oil? Thompson's® WaterSeal® Penetrating Timber Oil can be used on all exterior woods, including exotic hardwoods. Exotic Hardwoods, such as, Ipe and Mahogany, are a very dense and less absorbent species than pressure treated pine.
Does ipe darken over time?
1. Ipe will always darken with any oils. 2.
What is the best finish for IPE decking?
The Best Finish for an Ipe Deck Advantage Lumber recommends Ipe Oil and WiseCoat, which are comparable products, although WiseCoat produces a slightly darker color. Penofin Oil Finish is another solvent-based penetrating oil finish designed for dense hardwoods, such as ipe.
How often do you have to stain Ipe?
Periodic sweeping and rinsing with water will keep the wood looking better longer. Best to reapply the IPE stain before the wood turns gray. Depending on the exposure to the sun, you will need to reapply every 9-18 months.
How do you keep Ipe wood looking new?
Wash your Ipe wood surfaces with a nylon bristle brush or soft towel and Penofin® Pro-Tech Wood Cleaner to remove surface dirt, scrubbing in the same directions as the grain of the wood, then rinse off with water. Once complete allow to dry. In a pinch, you may use mild dish soap, then rinse clean with water.
Is it OK to pressure wash Ipe?
Using a pressure washer isn't recommended for regular cleaning of Ipe decking. Power washers use high pressure which can damage and roughen the surface of the wood. Use a shop vac to remove debris and dirt from between planks, a soft-bristle broom to sweep it off, or just a regular garden hose.
What is IPE wood?
IPE is a Brazilian hardwood that is very difficult to penetrate. Many wood and deck stain will not properly penetrate into this wood type. This results in premature fading of the finish. In this article, we will look at what makes a great and long lasting IPE finish.
Do you need to clean before staining wood?
Yes you should clean first before staining. No need to apply to all four side. Just exposed wood.
Is IPE stain expensive?
IPE is a very expensive a beautiful wood. Problem is that many stains are not able to penetrate well. Make sure when researching your IPE stain that you look for a brand that is specifically designed for exotic woods. Usually, you will see special formulas by major brands. Words to look for in the name are: Hardwood, Exotic, IPE, etc.
Does light stains fade faster?
Color of Pigment. Lighter pigmented stains will fade faster the darker stains. Make sure to choose an IPE finish that has a good amount of pigment. In addition "red" pigment will prevent UV fading longer than other pigments.
Do IPE decks need to be re-coated?
Since you will be re-coating your IPE deck annually (or sooner), it is best to choose stains that do not peel or darken in color. This makes a light cleaning and reapplication of the stains substantially easier.
How to get IPE to last?
The key to getting IPE to last is regular maintenance. With the right wood stain, IPE can be recoated and maintained very easily. To guarantee lasting protection from an IPE deck stain it is crucial to prep the wood surface correctly prior to stain application. For new IPE wood or grayed out wood we recommend using IPE Restore-A-Deck Wood Cleaner. ...
How long does IPE wood brightener last?
By cleaning the wood correctly using IPE Wood Cleaner (RAD) and using an IPE Wood Stain your exterior wood surfaces will look good and last for many years.
How to remove graying from wood?
1. Wet the surface and the surrounding area. 2. Mix the Cleaner or Stripper according to the directions and apply with pump sprayer, scrub brush, or mop. 3. Allow RAD to sit on surface for 10 minutes then perform a light pressure wash or scrub to remove dirt and graying from wood. 4.
Is IPE wood good for decking?
IPE has become increasingly popular with deck owners due to its beautiful appearance. It is a very dense wood that is naturally resistant to rot and decay making it a great choice for many exterior wood projects. The key to getting IPE to last is regular maintenance.
Can you use RAD wood cleaner on old stain?
For maintenance coats where the same stain product used last time will be applied again, it is possible to use the RAD Wood Cleaner and not have to remove the old stain. Once the surface is clean, the same wood stain should bond to itself to give good protection.
IPE Deck Staining Tips
DeckStainHelp.com has become the Internet’s go-to site for all things wood deck restoration related. As with all different types of wood surfaces, we recommend you properly prep your IPE wood before staining with a penetrating exotic hardwood stain. Feel free to leave us a comment with pictures and any questions you may have below.
Top IPE and Exotic Hardwood Stain Ratings for 2022
1. Restore-A-Deck Wood Stain 2. Armstrong Clark Wood Stain 3. Defy Hardwood/Cedar Stain
Best Hardwood Deck Stain Tips for Ipe
DeckStainHelp.com is the Internet’s go-to site for all things wood deck restoration related. Just like all different types of wood surfaces, we recommend you properly prep your IPE wood prior to staining with a penetrating exotic hardwood stain in 2022. Feel free to leave us a comment with pictures and any questions you may have below.
Top IPE and Exotic Hardwood Stain Ratings
1. Restore-A-Deck Wood Stain 2. Armstrong Clark Wood Stain 3. Defy Hardwood/Cedar Stain
How to clean ipe wood?
Wash your Ipe wood surfaces with a nylon bristle brush or soft towel and Penofin ® Pro-Tech Wood Cleaner to remove surface dirt, scrubbing in the same directions as the grain of the wood, then rinse off with water. Once complete allow to dry. In a pinch, you may use mild dish soap, then rinse clean with water.
How to brighten ipe wood?
To brighten and re-establish the pH balance of Ipe wood to best accept the Penofin® Verde Oil Finish, use Penofin® Pro-Tech Wood Brightener, then rinse off with water and allow to dry completely.
What is Penofin Verde?
Penofin Verde is an oil based wood stain that brings out the deep-chocolate hue of Ipe. To keep an ‘as-new’ finish reapply 1x year.
How long does IPE furniture last?
Ipe furniture is meant to last for many years, however, during that long life an inappropriate paint or stain may be applied. If your Ipe furniture needs to be stripped and restored to the ‘as new’ finish, follow these steps:
How to remove oil from wood?
To remove excess oil finish that hasn’t been absorbed by the wood, rub the Ipe surface with smooth rags until dry to the touch. Dispose of rags in a metal bucket of water to avoid spontaneous combustion. After completely dry, apply Wood Shield to timber to provide additional protection against water and food stains.
What is ipe wood?
Ipe (pronounced “EE-pay”) is a hardwood timber prized for its beauty and long-lasting durability in any environment. Ipe timber exhibits a deep chocolate-brown grain when new that may be allowed to naturally age to an elegant silver patina or brought back to an as new finish at any time.
Does IPE affect longevity?
Although Ipe is naturally stable, small checks in the surface (minuscule openings of the wood grain at the ends) may appear if the furniture is placed in a very dry or sunny environment. Superficial checking in no way affects the structural integrity and longevity of the furniture and will in fact disappear when the environment becomes moist.
Can you put penetrating oil on wood?
When you apply penetrating oil to softer woods, you can lay it on heavily by brush and it will suck in. Ipe will laugh at you as it spits most of the oil back out. The residue that is left will stay tacky for weeks, and then become a choice breeding ground for mildew formation.
Can Ipe be used on boats?
This rule, in my strong opinion, applies to all decks, including ipe. We have stripped far too many failing film coatings (like the old Sikkens formulations) to think it is any kind of a good idea. Sure, it works on boats, but is way too high maintenance for a home. Owners of boats with exotic woods generally have very good maintenance habits prior to each season, which attributes to the success of films on boats. But a boat is only in the water half the year. And home maintenance hasn’t achieved that level of mainstream fashionable enthusiasm…yet. May your ipe deck finish be the one that shoves the whole neighborhood in the direction of wood snobbery.
Is painting an IPE good?
Painting ipe may not be a good idea, but you do have some other options.
Is IPE good for exterior?
It just so happens that these two characteristics, density and oils, are what make ipe such a good choice for exterior projects in the first place. The dense grain gives it an impervious structure, and the oils fight off mold and decay.
Is ipe wood a non porous wood?
Paint won’t stick to them! For one, they’re just too dense. The tight grain squeezes other substances out, and creates a relatively non-porous surface (compared to softer woods) that leaves the paint with nothing to cling to.
