Once the scaffold board has been cut to size, sand it all over. The boards can be a bit rough, but if you use an electric sander they will be lovely and smooth in no time. Step 2: Next, stain and varnish the scaffold board. I used dark furniture wax to stain the board and then an outdoor varnish for the topcoat.
How do you make a bench out of scaffolding?
Step1: The first thing to do is to cut the scaffolding board to the length you would like the bench to be. Standard boards are 13ft long so you will probably want to saw the board in half (you can get two benches out of one standard scaffold board). Once the scaffold board has been cut to size, sand it all over.
How do you sand scaffold boards?
Once the scaffold board has been cut to size, sand it all over. The boards can be a bit rough, but if you use an electric sander they will be lovely and smooth in no time.
How do you remove the metal strip from scaffold boards?
Scaffold boards come with metal strips at each end. You can choose to prise these off, or leave in place. If you prefer to keep them in order to contribute to the general effect, one option is to remove the strip at one end, cut the wood to size, and then screw the metal strip back on.
Are scaffolding boards good for furniture DIYs?
As well as being good solid sturdy timber, scaffolding boards are very cheap. Especially old scaffolding boards, which can often be bought very cheaply and sometimes are even given away free by builders. Personally, I prefer to reclaim old boards for my scaffolding board furniture DIYs, as this only adds to their rustic aesthetic.
What does The Scaff Shop recommend?
How to contact Thescaffshop?
How do you stain wood scaffold boards?
3:5517:14Staining Pine Wood Shelves | Scaffold boards | DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo once that was done i then switched to the 240 grit sandpaper which is a lot smoother. And finer.MoreSo once that was done i then switched to the 240 grit sandpaper which is a lot smoother. And finer. And this is just finish it up and give it a nice smooth finish.
How do you make scaffold boards look rustic?
0:005:00How To Make Scaffold Board Shelves - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make them look good part of the character of these shelves is that the scaffold boards are inMoreAnd make them look good part of the character of these shelves is that the scaffold boards are in use conditions. So have all the knocks. And dents from years of being under the feet of builders.
Can you varnish scaffold boards?
Once the scaffold board has been cut to size, sand it all over. The boards can be a bit rough, but if you use an electric sander they will be lovely and smooth in no time. Step 2: Next, stain and varnish the scaffold board. I used dark furniture wax to stain the board and then an outdoor varnish for the topcoat.
What should I treat scaffold boards with?
To fully waterproof your valuable scaffolding wood, Woodcon is the best solution. Rough scaffolding wood treated with Woodcon for a water-repellent surface.
How do you whitewash scaffold boards?
0:032:173 Simple Ways to Whitewash Wood - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd allows the wood grain to show. Through first mix your paint and water next grab a rag and applyMoreAnd allows the wood grain to show. Through first mix your paint and water next grab a rag and apply liberally. Finally go back over and even things out.
Can you paint scaffold boards?
Scaffold boards are designed to be used outside all year round so they make a great sturdy table top. They can be painted any colour, stained or waxed to match the existing wood finishes in your garden.
Can you use Danish oil on scaffold boards?
It's also easy to apply - simply brush it on and remove excess with a rag. In particular with scaffold boards, which can be rougher or more textured than other timber items, danish oil applied with a brush is much better at getting in to and penetrating this type of surface, whereas wax and varnish may not be.
Do you need to treat scaffold boards?
Unless you're certain they're treated (and yes, you can buy treated scaffold boards!), in order to use them outside long-term, you will need to treat them. And if you don't and they're not treated, well don't expect them to hold up for nearly as long as decking would.
How do you sand and finish a scaffold board?
2:076:55sanding scaffold boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipBest way to do that is just with a bit of sandpaper fold in half. Worth it up and down the joint.MoreBest way to do that is just with a bit of sandpaper fold in half. Worth it up and down the joint. Angle it one side and then the other.
What wood are scaffold boards made of?
Typically, these boards are made from treated and finished wood, such as southern yellow pine or spruce, which then undergo inspection for compliance to Occupational Safety and Health Administration (OSHA) standards.
Can scaffolding boards be used as decking?
Either new or reclaimed scaffold boards can be used to create a long-lasting decking area. Your decking area can be built in all shapes and sizes to correctly fit your garden and can even be a raised area with steps.
What wood is used for scaffold planks?
Wood, such as fir or pine, is the most common material. High-quality wooden planks, such as Kennison Forest Products solid sawn scaffold planks or sure-lam LVL (laminated veneer lumber) scaffold planks, provide durable, safe planking solutions.
How do you make new boards look weathered?
The trick to producing the look of weathered paint on new wood is to use two coats of different colored paints. Typically, the bottom coat is white or another light color—you can even use white paint primer. Then, a topcoat—often blue, red, or some other bold color—is added to the top and is partially removed.
How do you make a rustic board look?
Place a wire brush at an angle on the board and run it with the grain. This will dig out the softer wood between the grain and give the surface more texture, which really helps make new wood look old. Wire brushing is more effective on soft woods such as pine. It works especially well on the end grain.
How do you make wood look old and distressed?
How to Make New Wood Look OldSTEP 1: SAND YOUR WOOD. Before we begin distressing the wood too much, we want to sand it with 120-180 grit sandpaper. ... STEP 2: DISTRESS THE WOOD USING A WIRE BRUSH. ... STEP 3: ADD MORE DENTS AND DINGS. ... STEP 4: SAND WITH 220-GRIT SANDPAPER. ... STEP 5: WIPE OFF YOUR SURFACE. ... STEP 5: APPLY A FINISH.
How do you make treated lumber look old?
Use a black tea wash first to get a grayer and darker effect:Boil water and add 2 black tea bags for each cup of water. Let steep for 5 minutes.Brush the tea onto the board. Let dry.Now apply the iron vinegar and let it dry. You're done!
Waxing old scaffold boards | DIYnot Forums
Hi all. In the middle of a project working on some old scaffold boards. I had them all sanded down to a fine finish and started to wax them. I am using Ronseal Interior Wax Dark Oak. I did a test over one side and what I noticed after leaving it to dry, was my once smooth board, is now rough...
Scaffold Board Finish | DIYnot Forums
I have cleaned up some old scaffold boards to a sort of grey finish which I want to keep for the shelving they will be used for. I tried some wood reviver on one and it turned red as did a splash of water. How do I protect the wood without changing the colour yet bring out the grain and...
treating scaffold boards - The Grapevine
I have over 25 scaffolding board raised beds. None of the timber is treated and they were just nailed together with 100mm (4') nails. The metal end cappings are left on and that helps to prevent splitting and does offer a little protection to the end grain of the boards.
What is scaffolding board furniture?
Scaffolding board furniture is a cheap and affordable way to build strong sturdy furniture for the home or even the garden. In fact, scaffold boards are great for DIY garden furniture as they are well designed to be used outside. The scaffolding boards are strong, structural timber, used as walkways on external building scaffolding.
What is the thickness of a scaffolding board?
The standard size for scaffolding boards is a thickness of 38mm, a width of 225mm, and lengths going up to 3.9m (13ft). The boards also have a protective metal brace over the short edge.
How long is a standard scaffold board?
Standard boards are 13ft long so you will probably want to saw the board in half (you can get two benches out of one standard scaffold board). Once the scaffold board has been cut to size, sand it all over. The boards can be a bit rough, but if you use an electric sander they will be lovely and smooth in no time.
Why are wooden shelves good?
Because the boards are really strong and sturdy they make great shelves especially for storage as they can take a great weight. That is as long as they are fixed properly. I have some shelves in an alcove above my desk and I use wooden battens in the wall to hold them up.
Is scaffolding board cheap?
As well as being good solid sturdy timber, scaffolding boards are very cheap. Especially old scaffolding boards, which can often be bought very cheaply and sometimes are even given away free by builders. Personally, I prefer to reclaim old boards for my scaffolding board furniture DIYs, as this only adds to their rustic aesthetic.
Can you cut scaffolding board down?
Scaffolding board, my scaffolding board was a shorter one. You can cut them down to whatever size you want.
Can scaffold boards be used to make chairs?
One scaffold board on its own can be used to make a rather cool and unique chair.
joec1985
Hi I am planning on building an L shaped desk for the office. I purchased 4 scaffold boards and was just wondering what would be the best way to sand them down ready to varnish? I have attached a picture of 2 of the boards along with an image of what I plan the desk to look like and the stain I have purchased. Any help would be appreciated.
foxhole
Sanding is not enough unless you have a industrial sander. Need plane first , used scaffold boards on a few doors .
JobAndKnock
Belt sander - a nice big 4in wide industrial jobbie starting with a 40 grit belt....
russellsmiler
Before you start any sanding... Get those boards in your car and down to your local garage that as a power washer...get them powerwashed to get rid of the grime and grit qand also "raise the grain" dry em out and then sand for a really good finish!!
DIYnot Local
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
What are scaffold boards used for?
Other than just being used as a working platform, scaffold boards have a number of other uses. A simple search on Pinterest demonstrates some of the creative, aesthetically pleasing and cost-effective projects out there. From indoor projects including shelving and tables to outdoor projects including decking and flower beds, scaffold boards can be used in so many different ways.
Can you build a table from scaffold board?
It is relatively easy to build tables from scaffold board, whether you’re looking for a large dining room table, a new desk or a coffee table for your living room. The design options for a scaffold board table in your home are endless! You may be looking to create a bench-style table, a box-shape table without legs for your hallway or a stylish dining room table with legs made from a different material of your choice.
Is scaffold board cheaper than wood?
Flooring. Reclaimed scaffold board is a cheaper alternative to your average wooden floorboard. Depending on your desired style, they can be sanded down, treated or varnished providing a hardwearing flooring option for your home.
Can scaffold boards be left untreated?
In the garden. Scaffold board has a variety of uses in your garden too. For outdoor use, reclaimed scaffold boards can be left untreated for a more natural aesthetic.
Can glue help with board shrinking?
Hmm, big risk of the boards shrinking and opening up gaps - no matter how tight you join them. Glue might help .
Can you dowele a board together?
I would have doweled them or biscuit jointed them together with a lot of Gorilla glue and clamps. That way any shrinkage/expansion would be for all the boards at the same time, so they wouldn't separate at all.
How long does it take to buff wax off wood?
The general technique I use is to brush the wax on with a paintbrush, leave it to soak in for about 20 minutes, and then buff it off using a special attachment for our power drill. This creates a nice shiny surface to the wood.
Where is the metal strip on the bottom shelf?
In this photo, you can see the metal strip on the left of the bottom shelf (it’s on the right on the middle shelf). The middle shelf hasn’t been waxed yet - and you can also see the texture along the edge.
Can you order scaffold boards online?
We bought the scaffold boards from Cheshire Scaffolding. You can’t order them online - you need to phone up and speak to someone to explain what you’re looking for. I requested boards that were nicely battered but not falling apart, and that’s exactly what was delivered. Scaffold boards come in different lengths - I ordered 3.6m boards, as the space for the shelves was 348cm wide.
Can I use Fiddes wax on Rugger Brown?
Moving onto waxing. We used Osmo topcoat oil on the worktops, but chose to use Fiddes wax in Rugger Brown on the shelves to give a different finish. I like using wax on rustic wood because it accentuates the character. of the nooks and crannies. The general technique I use is to brush the wax on with a paintbrush, leave it to soak in for about 20 minutes, and then buff it off using a special attachment for our power drill. This creates a nice shiny surface to the wood.
What does The Scaff Shop recommend?
All of the options described above are suitable, however we would always recommend a danish oil. The reason being that, as mentioned above, it penetrates well, gives a good even finish without changing the look of the wood too much, and lasts for a long time. It's also easy to apply - simply brush it on and remove excess with a rag. In particular with scaffold boards, which can be rougher or more textured than other timber items, danish oil applied with a brush is much better at getting in to and penetrating this type of surface, whereas wax and varnish may not be. Further to this, the oil finish has less effect on the final feel of the product, and it's the wonderful tactile quality of scaffold boards that make them what they are.
How to contact Thescaffshop?
If you have any questions about how to treat, finish, or maintain your board, then please don't hesitate to ask. You can contact us on [email protected].
