Full Answer
Can you lay tiles from the bottom to top?
When tiling from the bottom, there is no need for a baton, and you can lay tiles from bottom to top. If you choose the center of the wall as your starting point, first place the tiles and do a dry test to find the size of the tiles that you need to cut at the edges to fit them. When tiling from the bottom, there is one thing you should check.
How to tile around a bathroom?
Also, if you start tiling from the top of the wall, tiles may slip and fall because of the weight. If you don’t tile from floor to the ceiling, it is easy to end with a full tile. When tiling the floor around a bath, start laying tiles from the most visible point. Then lay tile towards the other side.
Where do you start when tiling a floor?
Start from the out side edge in, from botom to top. Start with level edge and base line. If you have out side edge, bullnose, trim, you make your cuts inside. Set tiles from botom as some tiles are heavy. rick1 March 23, 2018, 10:56pm #4 Always start at bottom and work your way up. info30 March 23, 2018, 10:56pm #5
Do you install Italian tiles from the top or bottom up?
I ran into an oldschool Italian tile installer and he said he starts at the ceiling and works his way down. Just curious to see other peoples techiques. 2 Likes victoria March 23, 2018, 10:56pm #2 We generaly start and work bottom to top, if there is a border or a band it seems less risky to lay it out from bottom up.
What to consider when choosing floor tiles?
Why does tile release when you replace it?
What is glazed ceramic tile made of?
What is porcelain tile?
What board should I use for tile walls?
Do you have to lay tile at the top or bottom?
How to absorb sound from ceiling?
See 4 more
About this website
Do you start tiling from the top or bottom?
Here's how you do it: Install the first four tiles in a pyramid: three on the bottom and one on top. Every subsequent row is a process of draping over the pyramid, back and forth. Begin your first drape on either the right or left side, and bring it up, over, and down the other side.
Can you tile from the top?
You most definitely can tile over tiles. Tiling over existing tiles is a great way to save time, money and update your space.
When tiling where do you start?
It's always advisable to start tiling your grid in the centre of the wall, as it's easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
What order should I tile my bathroom?
The tile installation principle is that the tiled wall 'hangs' over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be 'sitting' on the bathroom floor.
What are the cons of tiling over tile?
Cons of Tiling over Tiles You will need to remove broken, chipped, or damaged tiles while prepping your old floor. If there are numerous damaged tiles, it may be more efficient to remove the old tiles entirely and redo the tiling from scratch. Another disadvantage is tile weight, especially ceramic tiles.
Do you need to waterproof when tiling over tiles?
Re: Tiling over tile: do you need to waterproof? Hi @Joan_J, As long as there is an existing waterproofing layer, then an additional one doesn't need to be installed before re-tiling. You will need to check for any drummy tiles by tapping on them with the handle of a screwdriver.
Can you tile a room in sections?
Yes! You absolutely can! But the way you choose to do it can make a big difference in your tiling looks the next day!
Do you start tiling in a corner?
Most of the tiles will need to be cut to fit the perimeter of the room; starting in a corner allows you to begin the pattern with full tiles on a straight line and move evenly into the room. In this case, beginning in the center may make it more difficult to get the pattern moving evenly.
How do I get my first row of tile straight?
0:442:27How to Tile a Bathroom 34: Tiling the First Row - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you are doing it off of the level. You would just find your line and marking on the side here.MoreIf you are doing it off of the level. You would just find your line and marking on the side here. And mark it on the side here and that would be your cut.
Do you tile under a toilet?
The bathroom fitters are unanimous—if you're looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Should wall tile sit on floor tile?
Experts recommend leaving at least a quarter-inch of space between your floor and wall tiles when installing. It would help if you didn't fill this gap with grout.
How far should tile go past shower door?
Plan to extend the tile 2 or 3 in. beyond the tub and to leave at least a half tile along the wall if possible. Don't stop tile even with the end of the tub. This leaves the walls along the front of the tub vulnerable to water damage, and doesn't look as finished as tile extending to the floor.
How do you tile on top of tiles?
0:353:36How to tile over existing tiles with TAL Tile To Tile - YouTubeYouTubeStart of suggested clipEnd of suggested clipLeaving you with hollow-sounding or loose tiles. Next apply a primer slurry of talcum mix and talcMoreLeaving you with hollow-sounding or loose tiles. Next apply a primer slurry of talcum mix and talc key coat to the clean tiles to create a good bond. Between the existing tiles.
Can you tile on top of tiles on wall?
Yes it is possible to tile over an existing tiled wall or surface with new tiles providing that the existing tiles form a solid and stable surface to tile on. If there are any loose, proud or uneven tiles present on the surface then this can cause your new tiles to become loose and ultimately fall off.
Can you tile on top of floor tiles?
With the use of a high polymer modified adhesive, tiles can be fixed direct onto existing floor tiles once they are cleaned without the need to prime. Recommended for almost all sizes and most types of tiles including porcelain and ceramic.
How do you replace bathroom tiles without removing them?
1:373:31How to renovate tiles without really renovating - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst of all check the old tiles and grout a role in tagged remove silicon grouting or tape it downMoreFirst of all check the old tiles and grout a role in tagged remove silicon grouting or tape it down clean the tiles using vinegar or a tile cleaner until they are squeaky.
Tiling - from the bottom up or top down? | DIYnot Forums
If you tile top to bottom, your tiles may slip, why not work out where the tiles will finish & put a batten then tile up..if you are tiling it in one hit, then should you be a little bit out it will be easy to slide the tiles up & insert a piece of card in to hold them in the new position.
What is a tiler?
Tilers (WikiPedia) A tile is a thin object usually square or rectangular in shape. A tile is a manufactured piece of hard-wearing material such as ceramic, stone, metal, baked clay, or even glass, generally used for covering roofs, floors, walls, or other objects such as tabletops.
What is tile in construction?
A tile is a thin object usually square or rectangular in shape. A tile is a manufactured piece of hard-wearing material such as ceramic, stone, metal, baked clay, or even glass, generally used for covering roofs, floors, walls, or other objects such as tabletops. Alternatively, tile can sometimes direct to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In substitute sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of in flames clay.
How to make battens stand up?
Use the first tile to the corner where your battens meet so its edges protest them, and press its centre strongly to the wall. Include the tiles above and beside it, being sure to leave a space between them:
Can you tile a wall with whole tiles?
If you’re just part-tiling a wall a top horizontal row loaded with whole tiles makes for a much cleaner finish, so we think it’s truly worth investing a long time to get it right.
Can you use battens on horizontal walls?
As soon as you have actually established your vertical rows, it’s time for the horizontal ones. We recommend using wooden battens protected to the wall as a guide, as they’ll likewise assist prevent slippage while the adhesive is setting.
Diyisfun
If you tile top to bottom, your tiles may slip, why not work out where the tiles will finish & put a batten then tile up..if you are tiling it in one hit, then should you be a little bit out it will be easy to slide the tiles up & insert a piece of card in to hold them in the new position. I have used this method & it worked for me.
mrcrow
the tiles were pretty hefty and i could see them slide as i fixed each one.
Diyisfun
Do the bottom tile last...fix a batten ..work up...then when happy remove batten ..cut & fix bottom tiles.
DIYnot Local
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
How To Tile A Wall: A Total Guide To Wall Tiling
The idea of tiling your own walls may be difficult prospect, but with the right preparation and by using the right tools, it’s a lot more simple than you may believe.
Wall Tiling Preparation
The first step is working out the number of tiles you need, and to do that, you have to calculate the area of the space you’ll be covering. Measure the height and width of the area then multiply the figures.
Produce Your Design
As we mentioned previously, develop your vertical rows from the middle of your space. You can find this simply by measuring the height and width, and marking the middle with a pencil.
Where to start tiling a floor, some helpful tips
In general, when tiling a floor, start from the center of the room. This will make your job easier, and the tiling pattern will be symmetrical. If you want to tile your room diagonally, this technique offers a logical area to begin. But there are situations where the center is not the best starting point.
Where to start tiling a backsplash, some helpful tips
In general, when tiling a backsplash, the starting point is the center. No matter if you are going up, down, or sideways. However, if you are tiling an intricate pattern, find the backsplash surface’s focal point and start fixing tiles from that point.
Where to start tiling around a bath, some helpful tips
In order to lay tiles around a bath, you again need to find the starting point where you will fix your first tile. Around a bath, tiles can be laid both on the floor and the wall. The key factor in both cases is to find the starting point to tile effectively.
Where to start tiling, some helpful tips
In general, the most recommended starting point to lay tile is to start from the center. Find the center point of the surface. To do this, measure the length of the surface and divide the number in half. Draw a straight line at this point. Similarly, measure the width of the surface and divide it in half as well.
Wall tiling, where to start. Some helpful tips
In general, always tile from bottom to the top. And start from the center. Tiling the wall from top to bottom is a precarious process and is not recommended. There is a chance that tiles may slip if the thin-set used is not top quality or the tiles are heavy.
Do you start in the middle when tiling?
Generally, I recommend start tiling from the middle of the wall or floor. This helps to achieve even tile cuts on both sides end and a symetrical. When you tile more complex layouts, it is often better to start from where the eye first looks.
Can you start tiling in a corner?
You can start tiling a floor from the corner, but I do not recommend it. Only when the corner is the main viewpoint of the room would I start there. For a wall, this is different. If the corner is clearly visible, it could be a good starting point. Depending on the layout, start with a whole and a half tile repeating after each other.
How To Trim The Edge Of A Tile?
Well, having rough surfaces might not be the best look for your newly furnished house. Hence once you’re done tiling, it’s better to trim the edges of your til es.This gives a much smoother finish and looks great.
How to cut a sleeve on a wood trim?
First, secure one of the sides of the trim using clamps. Placing it firmly in position. Then use your miter box as a guide for the cut. Take your hacksaw or a trim cutter to cut according to your measurements. Repeat this for all the other ones.
How long does grout need to dry before sealing?
Once the adhesive has dried off, you can prepare to grout and seal. First, apply the grout in places where there’s a gap. Allow it to dry for at least 24 to 48 hours.
What is stone trim?
The stone trims are used commonly for shower walls or for inside the shower. These are thick and easier to install. Moreover, they look seamless and you can enhance it by polishing the outside. However, they are a bit on the expensive side.
Can you have half tile at the bottom?
Answer: If your tile from top to bottom, your tiles may slip and crack. Moreover, it might not look good to have a half tile at the bottom due to space. So it’s better to start from the bottom and work your way up.
Can you put carpet over tile?
Moreover, to enhance the look of your tiles, you can put carpet over it. This won’t damage your tile but will surely make the room feel homely .
Do you trim tile edges when tiling a house?
You’re tiling your brand new house. To finish off the entire process you need to trim the tile edges. Confused about how you can install it? We’ve just the thing!
Where do you start when you don't have a tile design?
If you don’t have a specific design on tile, you start from bottom. If you have a design … than you can start anywhere you want to, depends on the design. That would depend on the individual, I find it better to measure out the tile using the specific spacer then build from the bottom up.
Where should I start installing tile roof?
I would say starting install the tile roof from the bottom to top
What is the back wall of a 3 by 5 shower?
On standard three by five shower the back wall we always start center and bottom to top so we have equal cuts in the corner then side walls we start front to back & bottom to top so you also have equal cut in corner the combined corner cuts are usally just over a full tile looks great….
Can you start anywhere with a design?
If you have a design … than you can start anywhere you want to, depends on the design.
Do you lay out your wall first?
you lay out your wall or floor first.
What to consider when choosing floor tiles?
Firstly, it’s important to consider the look and feel you would like to display to your guests and most importantly the look and feel that you yourself would like – it is you who will be seeing and using this room every day after all! As with everything that com
Why does tile release when you replace it?
Typical reasons for a tile to release from the substrate are: 1. inadequate mortar for a secure bond, specifications are 95% coverage for good adhesion. 2. floor wasn’t cleaned well enough and mortar didn’t bond. 3. flat troweling mortar to floor to insure bond wasn’t done prior to “combing” mortar for tile. 4. to much mortar was spread and skinned over before tile was set and/or back of tile wasn’t flat troweled to facilitate bond. 5. if loose tile are next to the wall without anopen space of approx. 1/4″ pressure from the wall can cause tile to buckle on the floor. 6. setting a tile cut on a wet saw without drying and back troweling will release. 7. set with the wrong mortar or adhesive. 8. movement in the substrate, this typically will cause tile to crack but sometimes tile pop too.
What is glazed ceramic tile made of?
Ceramic tile are made from clay and sand. But the glazed ceramic tiles have a liquid glass coating on the surface. The liquid glass coating creates the texture, design and color of a glazed tile and protects the body of the tile from staining. Due to this extra layer, custom tile designs can be added to them. This allows the floor tiles designs to be available in multiple colors. Due to their vibrant allure, they are most used as floor tiles for kitchen
What is porcelain tile?
Porcelain tiles are full-body ceramic tiles that is most used when it comes to floor tiles. The clay used to build these floor tiles is denser when compared to others. They hold higher density and MOH’s scale rating with very low porosity. These floor tile designs have a water absorption rate of less than 0.5 percent. Due to their low-slip factor and water absorption rate, they are the most purchased floor tiles for bathrooms.
What board should I use for tile walls?
Bear in mind the age of the structure and be sure to clad the walls to be tiled with Hardi-backer board.
Do you have to lay tile at the top or bottom?
Proper tiling you have the same size tiles at the walls corner & also same top & bottom. You have to layout, usually thebottom first row is. Cut but almost a full tile, but you don’t want a small tile at the top either. You have to draw some reference lines.when you apply adhesive you don ’t cover the lines. It’s critical on walls to be horizontally level & square the vertical to this. If you’re not accurate your tile would not line up &cannot be installed
How to absorb sound from ceiling?
Consider plastering and painting the ceiling matte or flat to absorb sound. It makes a slight but noticeable difference.
