Knowledge Builders

can you use a polaris 360 with a booster pump

by Delta Wilderman MD Published 3 years ago Updated 2 years ago
image

If you like the looks of the Vac-Sweep® 380, but you don't want to purchase and run a booster pump, the Vac-Sweep® 360 will do the trick.Jun 22, 2018

Does a Polaris pool cleaner need a booster pump?

The Polaris Vac-Sweep® TR36P features advanced technology cleaning without the need for a separate booster pump. Vacuums, sweeps and scrubs the bottom and walls of any size or shape pool. In-line back-up valve automatically frees the TR36P if it gets cornered and keeps cleaning without interruption.

Does Polaris 380 need booster pump?

The Polaris® 380 comes complete with filter bag, hose assembly, back-up valve & wall fitting. **Note the Polaris® 380 requires a Polaris® Booster Pump to operate.

What does a Polaris booster pump do?

The Polaris booster pump supplies high pressure water to the Polaris pool cleaner to optimize cleaner efficiency. The pump is not self-priming and should only be used when the pool filtration pump is on. Running the booster pump without the filtration pump will damage the booster pump.

How can I tell if I have a Polaris 360 or 380?

The newer Polaris cleaner models have the serial number stamped on a sticker on the back of the cleaner. If the serial number starts with a “K” it will be a 380, if it starts with “C” it will be a 280, if it starts with a “L” it will be a 360.

Is it OK to leave Polaris in pool?

Leaving the power supply in standing water could damage it. It's best to store the machine and its power supply in a covered location when not in use.

Why does my Polaris get stuck in the corner?

Adjust the float about 1 inch from the mast pipe. So push it all the way in and then pull back about an inch. If it still get stuck adjust the thrust jet at the back by slightly loosing the screws on around the base of the jet and play around with it until it covers the pool properly. Hope this helps.

Can you run booster pump without main pump?

The reason for this is the polaris pump is a booster pump and it is designed to have a fair amount of pressure already going to it. If you run it without the main pump (as long as it has water) you probably won't damage it but the polaris won't be getting enough pressure to operate properly.

When should you use a booster pump?

Water booster pumps are required when the pressure and flow rate delivered at individual plumbing fixtures fail to meet code requirements. However, before installing the system it is important to confirm if low pressure is not due to other factors, such as clogged or undersized piping.

How long do Polaris booster pumps last?

Most pool pumps need to be replaced after 8 to 12 years of regular use. There are a few factors that affect how long a pump lasts.

Why does my Polaris 360 run on its side?

0:041:10Polaris Cleaner On its Side on Bottom and Spinning in a Circle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd more than likely it's just float right here in the back that's lares this float just pulls rightMoreAnd more than likely it's just float right here in the back that's lares this float just pulls right off. And basically you shake it and you hear that water in there and it's pretty heavy.

How long does a Polaris pool cleaner last?

You can expect the device to serve you for four or five years. It can even last up to eight years with the right upkeep. Although you can find cheaper models that do not offer the same lifespan but given the proper care, you can still expect them to run for at least three years.

How does a Polaris 360 Pool Cleaner Work?

5:036:18Polaris 360 Setup, Review & Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's a Polaris 360. Working pretty good in this pool. See it's moving at a pretty good pace.MoreAnd there's a Polaris 360. Working pretty good in this pool. See it's moving at a pretty good pace. Not quite the full rpm. But if I back wash the filter it'll probably get it back up to 28 32.

Which is better, Polaris 280 or Polaris Vac Sweep?

They think it simply cleans better than the other models. Pool professionals also tend to recommend the Polaris Vac-Sweep 280 as the best pressure-side pool cleaner on the market ( buy it on Amazon ).

What is a Polaris 280?

The Polaris 280 can clean the walls and floor of an inground swimming pool. It has a single chamber filter bag where it stores the leaves and other debris that it removes from the swimming pool floor. This keeps most of the debris away from the pool pump basket and filter.

What is the best pressure side pool cleaner?

Pool professionals also tend to recommend the Polaris Vac-Sweep 280 as the best pressure-side pool cleaner on the market ( buy it on Amazon ).

image

1.Polaris 360 - Pool Forum

Url:http://www.poolforum.com/pf2/showthread.php/6583-Polaris-360

12 hours ago  · Can you use a Polaris 360 with a booster pump? The flip side is that pressure side cleaners usually require an additional booster pump to build up the proper pressure to make the cleaner go. That's not the case with the Polaris 360. It can operate without a booster pump, using just the water your pool circulation system is already pumping.

2.Polaris Vac-Sweep Review: 280, 360, 380 And 3900 Sport

Url:https://poolcleanerguides.com/reviews/polaris-vac-sweep-280-pressure-side-pool-cleaner-review

14 hours ago  · No. The 360 is designed to work with lower pressures and higher flow rates. The booster pump puts out higher pressure and lower flow rates like the 280 and 380 require. I would highly recommend you NOT get a booster pressure cleaner as they are the most inefficient in terms of power consumption. Report.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9