With a pool slide, you can! A pool slide can bring a whole new level of fun to your swimming pool. Whether you’re young or old, a pool slide can add hours of enjoyment to your time in the water.
Full Answer
Should you add a slide to your pool?
If you move into a home that has a pool and decide you want to add a slide, that is not a problem either. Before you rush out and buy a pool slide, you will want to do a little research.
What should I look for when buying a pool slide?
Check the footprint of the slide you are interested in. The footprint is how much space you need to install the slide legs and ladder. You need to make sure you can use the slide you choose on your pool, in terms of it’s footprint, and your water depth.
Can you put a pool slide on a metal ladder?
An above-ground pool can have a pool slide that is placed on a platform made from wood or a metal ladder. An inground pool may need a metal ladder and additional supports to keep the ladder from moving around. Remember depth. Three feet is ideal as a minimum, but many professionals prefer a depth of 10 feet.
What is an in-ground pool slide?
An in ground pool slide is is designed to be anchored to the concrete walkaway around the pool. Most playground slides do not have that capability and it would take a lot of adapting to make it secure for kids to use safely.
Can you put a slide in a pool?
If you have kids or even grandkids, a pool slide is a fun addition your backyard swimming hole that's sure to bring extra laughter and cherished memories. You can add a slide to an existing inground pool as long as you follow certain safety guidelines.
How do you make a water slide into a pool?
1:3810:39DIY Backyard Water Slide into Pool from Tree House!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe next thing you need to do is make the supports. So just like that stick out into the pool aMoreThe next thing you need to do is make the supports. So just like that stick out into the pool a little bit that's why you know and always mihrab ah. Nice Chris look at this.
How much does it cost to build slide for pool?
Cost: The range in cost is wide. A simple, prefabricated slide with ladder might be installed for $4,000, while some of the tantalizing slides shown here could easily top $100,000.
How deep does your pool need to be for a slide?
“For sliders shorter than 48 inches, if the distance between the end of the slide and the water, known as the drop, is 3 inches or less, the water depth should be 2 feet. For sliders taller than 48 inches, the pool must be at least 3-feet deep, with some manufacturers requiring 3 1/2 to 4 feet as a minimum.”
What is a swimming pool slide called?
A water slide (also referred to as a flume, or water chute) is a type of slide designed for warm-weather or indoor recreational use at water parks.
Can you use a slide with an above ground pool?
If you have an above ground pool with a deck, then you can opt for a blow up slide or a solid permanent slide. If you have an above ground pool with a deck, then you can opt for a blow up slide or a solid permanent slide.
How much does it cost to build a slide?
The cost of a commercial playground slide can vary greatly. You can typically find them priced anywhere from $1,500 to $20,000 but the average cost is around $3,000-5,000.
What are pool slides shoes?
The slide has been a footwear mainstay for centuries. But wasn't until 1974 (when Adidas launched its Adilette sandal) that the pool slide as we now know it came to be. Designed as a quick-drying option to wear post-workout, the easy-on-easy-off shoe was initially relegated to locker rooms and college lacrosse games.
How much does a waterfall feature on pool cost?
The cost of adding a waterfall depends on size and materials, but an entry level ballpark figure would be between $5,000 and $10,000. Some extravagant waterfall systems can cost upwards of $30,000.
How do you anchor a pool slide?
3:497:15Pool Slide Deck Anchors Installation Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide what you do is you take the the leg support flanges and you use them as a template to mark theMoreSlide what you do is you take the the leg support flanges and you use them as a template to mark the holes. For the anchor bolts just like that and you do the same thing for the ladder.
Is 6 feet deep enough for inground pool?
For residential pools, the standard maximum depth of an inground pool is usually 8 feet. But pool builders can build deeper pools. If you plan to install a diving board, 8 feet is the minimum depth you will need in the deep end. This depth is deep enough for diving in safely with a diving board.
How do you build a water slide?
Make Your Own Homemade Water Slide: Step By Step GuideFind A Good Location.Pick Out The Slide Material.Lay Out The Slide Material.Add A Side To The Slide.Secure The Slide.Set Up The Hose.Add Lubricator To Slide.Protect The Grass.More items...
How do you make a concrete slide?
2:135:52How To Build a Concrete Pool Slide, FOOTINGS ETC. - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst going up the slide trough that you want and then you cut your little footings around theMoreFirst going up the slide trough that you want and then you cut your little footings around the perimeter of it.
What are pool slides made of?
Materials/Surface Most modern pool slides are made of either fiberglass gelcoat or rotationally molded polyethylene plastic. Both of these are beautiful materials! They are both extremely durable and impact resistant, chemical resistant, corrosion and rust resistant, and will not fade over time in the sun.
How do you attach a slide to a deck?
2:443:49How to attach a slide to a deck - YouTubeYouTubeStart of suggested clipEnd of suggested clipEasy. Just got to attach in the wooden. Support at the bottom that goes through one of the otherMoreEasy. Just got to attach in the wooden. Support at the bottom that goes through one of the other nuts. And then add one more 2x4 between your support beams. This will keep the slide in place.
What does the installation manual for a pool slide tell you?
The slide's installation manual will tell you what you need to have on hand for installation. Your slide will come with the appropriate hardware for a concrete pool deck; if you have another kind of deck, you can discuss your installation options with your vendor or installer. Measure your deck and mark the position for the slide.
How deep should a slide be in a pool?
Slides must be installed over a water depth of at least 36 inches, dropping to 42-54 inches as you move away from the slide. This generally means the middle of a pool, neither the shallow end nor all the way in the deep end. Too shallow and a slider can hit the bottom of the pool which is dangerous. However, putting the slide in the deep end can be ...
What is the difference between a straight leg slide and a mold slide?
You will need to think about how the slide attaches to the deck. Molded leg slides have enclosed staircases (safer for young kids) and are mounted to the deck. Straight leg slides have actual legs and often open staircases. These are less expensive, but may not be as suitable for young children. Final item to decide on is color, and since slides usually come in multiple colors options you can choose one to fit your overall backyard vibe.
How long does it take to install a pool slide?
Generally, installing a slide is a two-person job and should take you about four to eight hours to install. You may need a third person to help manage the slide's weight as moving the slide into position is the most demanding part of installation.
How to avoid tipping on a slide?
The most important thing is to double check at every stage to ensure that the slide is properly secured to the deck to avoid tipping.
How much weight can a slide hold?
Slides typically have a 250 pound weight limit; make sure this isn't exceeded, for safety reasons.
How much weight can you put on a slide?
Slides typically have a 250 pound weight limit; make sure this isn't exceeded, for safety reasons. If you throw a lot of pool parties, a polite sign is a good idea. A few heavier slides may have a higher limit, generally 275 pounds.
What is a slide in an inground pool?
Adding a Pool Slide to your Inground Pool. A slide is a great fun addition to a pool. You will know where your kids are because them and their friends will be all at your home. What better way to keep track of them and keep them out of trouble.
How much weight can a pool slide hold?
Each slide also has its own weight capacity, from 200-275 lbs, which could be an important factor. Straight Leg pool slides is the first group.
How deep should a pool slide be?
WATER DEPTH: Basically, slides must be installed over a water depth of 36 inches, which quickly drops to 42-54 inches. All slides have different specs, but most Water Safety Envelope requirements will require the slide be installed on one of the long sides of the pool, in the mid-depth section of the pool between the shallow and deep end. It can’t be too shallow or too deep. Read the spec sheet for each pool slide you are considering to find exact depth measurements.
How much water does a cyclone slide take?
The footprint on these slides ranges depending on the model; the Twister footprint is roughly 13 feet by 7 feet, and the Typhoon is 12 feet by 5 feet. The smaller Cyclone Fun Slide only needs roughly 5 feet by 7 feet of pool deck space and 42 inches water depth (most other slides require 48 inches water depth). The weight limit on these slides ranges from 250-275 pounds.
What slide legs are used in the Typhoon?
Molded slide legs are another group. These slides would be the 8-foot-tall Turbo Twister, Typhoon and the Cyclone. The Cyclone comes in the right turn only while the Twister and Typhoon have left or right turns. These slides have enclosed stairways, rather than the traditional open ladder, which is generally safer for kids.
What is elephant leg slide?
Elephant leg slides are the third group of pool slides. This would include the G-Force and the X-stream slides. The G-Force has a circular 360-degree design while the X-stream comes in left or right turn. The G-Force 360 slide has a much smaller footprint (9 feet by 7 feet), requiring much less deck space for mounting. The X-Stream slide is large and needs about 14 feet by 9 feet of deck space. It has a 250 pound weight limit.
How long does it take to build a slide?
The hardest part will be lifting the slide into place. With two people you are looking at about 4-8 hours to build the slide anchor it and hook up the water line. INSTALLATION: First read the installation manual and the owners manual for the slide.
How deep should a pool slide be?
Three feet is ideal as a minimum, but many professionals prefer a depth of 10 feet. Figure out how you are going to secure the slide to the pool area and the ladders. You will need to figure this out. Do not puncture the sides of the pool!
How to make sure a slide is properly positioned?
If it’s not positioned properly, move the structure and mark off the areas that the supports should be placed on. Plant the supports in place.
How deep should an above ground pool be?
An above-ground pool can have a pool slide that is placed on a platform made from wood or a metal ladder. An inground pool may need a metal ladder and additional supports to keep the ladder from moving around. Remember depth. Three feet is ideal as a minimum, but many professionals prefer a depth of 10 feet.
How to get rid of mold on slide?
To get rid of mold, make sure to wipe down the slide with white distilled vinegar or another antifungal substance. Vinegar kills mold while keeping things safe.
How to bring ladder into ground?
Ideally, you will have a way to bring the ladder firmly into the ground. Remember that you might need to remove tiles or alter a concrete area if you have to lock a slide into the ground. Sadly, you might have to plan around that as well. Measure, measure, measure. This is a must for any construction project.
What is a water slide made of?
Waterslides are typically made of ultra-durable PVC or plastic. In the case of slip n’ slides (the ones that are rolled out and laid flat), the material is often nylon on vinyl. The bottom line? Most slides are made of strong, durable, synthetic materials that won’t break. You have nothing to worry about there.
Why is my pool toy falling?
There is an extremely high risk of slipping and falling when using a pool slide, which is why this pool toy is starting to fall by the wayside. If you want to reduce risk, make sure that your pool slide has proper traction grips and adequate railing. When using the slide, make sure to watch for people below and don’t allow kids who can’t swim to slide.
How much weight can a pool slide hold?
Each slide also has its own weight capacity, from 200-275 lbs, which could be an important factor. There are a few different slide categories, based on how they are attached to the deck. Here is a couple to start off with.
How deep should a slide be in a pool?
WATER DEPTH: Basically, slides must be installed over a water depth of 36 inches, which quickly drops to 42-54 inches. All slides have different specs, but most Water Safety Envelope requirements will require the slide be installed on one of the long sides of the pool, in the mid-depth section of the pool, between the shallow and deep end.
What is a pedestal leg slide?
Pedestal leg slide these slides have a rounded molded mount base on which to mount the slide, sometimes requiring less deck space to install. Before you can choose a slide you need to see how much room you have to place the slide. Each slide has a different footprint (amount of deck space needed for installation).
What is a straight leg slide?
The Straight leg slides , these slides have an open or closed stairway. The molded slide leg, These slides have enclosed stairways, rather than the traditional open ladder, which is generally safer for kids.
Is a slide good for a pool?
From the memories of the playground to your own backyard swimming pool, for hours and hours of fun and enjoyment, a slide is a great addition to your swimming pool. If you are building a new pool and decide you want a slide, this is quite easy because you would install the slide while doing in the installation.
Can you add a slide to a pool?
If you move into a home that has a pool and decide you want to add a slide, that is not a problem either. Before you rush out and buy a pool slide, you will want to do a little research.
Can a pool slide be too deep?
It can’t be too shallow, or too deep. Read the spec sheet for each pool slide you are considering, to find exact depth measurements. Each slide also has a unique Water Safety Envelope. This includes how deep the water has to be at the end of the slide, how much overhang on the edge of the pool, and how much clearance (and depth) ...
How deep should a pool slide be?
To make sure that they are safe, you should install it in an area of the pool that’s three to five feet deep.
How to maintain a slide?
The first part of maintaining a slide is making sure that you keep it clean. No-one wants to have the slide filled with debris, like sticks and leaves. This can tear the plastic and injure the sliders.
What to do when a slide is shaking?
The first thing that you need to do is look for any loose fittings or connections on the slide. Sometimes the vibrations caused as people slide down can shake fittings loose.
What happens if a slide does not reach out over the pool?
Otherwise, if the slide does not reach out over the pool, your kids might slide down and not reach the water and could get hurt. If you are using an inflatable pool, position the pool under the slide so the slide goes directly into the middle of the pool. Ensure the slide is stable.
How to help kids with a slide?
Supervise your kids whenever they use the slide. Get into the water and stand near the end of the slide if possible, especially to catch smaller children. That way, you can help them as they land in the water.
How to test a slide in water?
Ensure the slide is stable. Test the slide by sending an object down it to make sure it lands safely in the water. For example, try sending down a plastic cooler, or something else that can get wet. The slide might work more effectively if you get it wet first. Position the slide so it flows over the water's edge.
Can kids slide down a slide?
Do not let your kids slide down the slide unless they are able to swim and/or are wearing flotation devices. Swing sets provide hours of fun for kids during warm weather months. They are a healthy alternative to watching TV, and they encourage kids to get outside and get some physical exercise. If your swing set has a slide, you can use ...
How much does a pool slide cost?
The cost of a pool slide all depends on the design and material you choose, so it will vary. A simple slide with the ladder could be installed for $2000 while a more custom slide could be up to $100,000.
What is the best material for a pool slide?
Fiberglass. A reinforced plastic material composed of glass fibers embedded in a resin matrix. Fiberglass is a great choice for a pool slide due to it’s durablitiy. Fiberglass is also durable and has low maintenance requirements.
What safety features are needed for a slide?
Make sure you buy a CPSC-compliant slide, you can also look for additional safety features like sturdy, molded handrails that are easy to grip, wide ladder treads with enclosed steps, and high side walls.
How deep should a pool slide be?
For people taller than 48 inches, the pool must be at least 3-feet deep, ...
What is a pool slide made of?
Most pool slides are going to be manufactured from polyethylene which is one way of saying, plastic. It’s highly dependable to water and pool chemicals, plus it maintains its color and holds its shape despite intense and long-term sun exposure.
How to keep a slide clean?
No one wants to go down a dirty slide with leaves, twigs, bugs and other outdoor debris that can make their ride uncomfortable. Brush with a broom or brush then you can use spray or a soft cloth and then rinse to remove the grime and keep your slide looking good.
How tall is a straight leg slide?
Generally, the height of a straight leg slide ranges from 8 to 12 feet tall. Depending on the grade of the slide you may need to add 6 inches to a foot of more pool depth due to the speed of the grade. This is going to require the least amount of pool desk so it’s the most common option.