Yes, you can use fuel hoses for coolant. They have better durability and pressure strength, which makes them suitable for coolant. If you want more information about using fuel hose for coolant, let’s dive into this article. Fuel Hose for Coolant System- 2 Key Points
What is the difference between a fuel hose and coolant hose?
A coolant hose can only withstand a pressure of 13 psi, unlike the fuel hose that can withstand a psi of 25. This pressure difference makes a fuel hose ideal for coolant and a coolant hose not suitable for the fuel system. You should also know that fuel hoses cost more than coolant hoses.
Can you use a fuel line for coolant?
There are car owners who have used fuel lines for their coolants for years. Some have even gotten three or even five years of service. That shouldn’t be surprising because fuel hoses aren’t only stronger, but they are more durable. With a fuel line swapped out for a coolant line, you need not worry about leaks or any other things.
What kind of fuel hose do you use for fuel injection?
High-pressure fuel hose for clamp-type fuel-injection systems is also available. This fuel hose is SAE 30R9-rated and uses a fluoro elastomer inner liner that will withstand up to 180 psi and 300 degrees.
What to do if your coolant hose is leaking?
Coolant hoses tend to wear out pretty fast. If you notice a leak along your coolant hose, the best solution would be to replace it with a new one. At your nearest auto store, you may not find a coolant hose. But one thing that you are guaranteed of finding is a fuel hose. The latter is very common.
Does antifreeze hurt rubber hoses?
Does a traditonal parts store have a hose?
Is there a petcock valve between the radiator and the hose?
About this website
Can fuel line be used for coolant lines?
Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.
What kind of hose can I use for coolant?
Coolant Hose Coolant hoses come in two flavors – heater hose and radiator hose. They hoses are made the same, but the sizes are real difference. Heater hose is generally ½, 5/8, and ¾-inch in diameter. There are different types of heater hose, from standard to heavy duty.
Is coolant hose fuel resistant?
Well standard silicone hoses are porous and therefore not suitable for oil or fuel. There are flurosilicone liners, which are specially formulated to prevent oil from penetrating the wall but we would not recommend these for Fuel lines, or heavy use of Fuel Filling.
Can you use any hose for a fuel line?
Rubber Hose It must be rated for fuel or be labeled as meeting one of the following SAE grades: SAE J30R7 is carburetor rated fuel hose and should only be used in limited runs up to 50 psi. SAE J30R9 is fuel Injection rated fuel hose which can handle up to 100 PSI.
What are the four types of hoses that are in the cooling system?
Coolant hoses include the upper radiator hose, lower radiator hose, heater hoses and bypass hose (some engines). Coolant hoses are made of reinforced synthetic rubber made to withstand heat, vibration, pressure, and cooling system chemicals.
What are the 2 different types of radiator hoses?
There are two types of radiator hoses, upper and lower. These parts aren't interchangeable and come in different length and shapes.
Is silicone hose good for coolant?
While rubber hoses are standard for radiator hoses, silicone hoses have a greater resistance to heat, and they are more durable and longer lasting. It's for this very reason that replacing your coolant hoses with silicone hoses gives you more peace of mind.
Is heater hose the same as coolant hose?
Coolant hoses and heater hoses are essentially the same thing, but applied towards different purposes. Coolant fluid, like Freon, is much more effective at cooling an engine (and heating a car) than regular water, because water boils and freezes much faster than Freon.
Can you use hydraulic hose for coolant?
These hoses transmit industrial fluids that can be aggressive including: Motor oils. Heavy-duty coolants. Transmission and brake fluids.
How much pressure is in a fuel line?
Required fuel pressure can vary depending on your vehicle's engine and fuel system. Carbureted engines may require as little as 28 kPa (4 PSI), while modern multipoint fuel injected high-performance engines can require as much as 414 kPa (60 PSI).
How much pressure is in a fuel injection line?
In fuel-injected systems, fuel feed line pressures can be as high as 120 psi so it's best to make sure that the lines and connections in your system are up to task. High-pressure rubber fuel injection lines are readily available, but they can also be replaced with steel-braided lines for added strength.
What is fuel hose made of?
Rubber. Most vehicles have rubber fuel hoses connecting the fuel pipes on the chassis to the fuel pump or carburetor on the engine. Rubber hoses are flexible and can be cut to length as required, but they have a tendency to perish over time and can rub through if not properly secured.
Can silicone hose be used for coolant?
As such, silicone hose is ideal for use in radiator and water coolant systems. However, EPDM rubber hoses are also suitable for a variety of water coolant applications and can be more cost-effective than other materials when large quantities are required.
Is heater hose and coolant hose the same thing?
Coolant hoses and heater hoses are essentially the same thing, but applied towards different purposes. Coolant fluid, like Freon, is much more effective at cooling an engine (and heating a car) than regular water, because water boils and freezes much faster than Freon.
What is the best material for radiator hoses?
rubberThere are a variety of types of radiator hoses, all mostly made of rubber - although rubber deteriorates rather quickly, it is still the best overall material to make a hose out of.
Is heater hose the same as radiator hose?
Both the upper and lower radiator hoses are the largest hoses in the cooling system connected to the engine. Heater hoses are smaller hoses that are attached to the heater core, which is located under the dashboard, to supply warmth to passengers in the cabin.
Can i use a fuel hose as a coolant hose? - 8th Generation Honda Civic Forum
So i recently posted a topic about coolant and the TB. I replaced the leaky coolant hose with a 1/4 fuel hose. The new fuel hose does have threads on the inner jacket so i am assuming it is rated for some heat and pressure. However, as this did solve the leaky problem the hose after driving...
Fuel Hoses, Lines & Fittings | NAPA Auto Parts
The Danger of Faulty Fuel Lines. You probably don't think twice about the condition of your fuel system. Who can blame you? Your fuel tank, lines and hoses rest within your vehicle, making it difficult to inspect after years of use.
30R7 Fuel Line Hose - Discount Hydraulic Hose
Inner tube: Oil-resistant synthetic rubber SAE 30R7 Fuel Line Hose is Recommended for low pressure/high temperature fuel for passenger car, light truck and small engine applications. Not intended for fuel injection systems. 30R7 is not Coast Guard approved for marine applications.; Use with Fuel Line Hose Barbs; Reinforcement:
Standard Fuel and Oil Hose | Gates Corporation
Before you start your engines, equip them with Gates fuel hoses. We’ve engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power.
What is a high pressure fuel injection hose?
This fuel hose is SAE 30R9-rated and uses a fluoro elastomer inner liner that will withstand up to 180 psi and 300 degrees. It is approved for all fuel blends including straight methanol, and the outer coating is also ozone- and abrasion-resistant. High-pressure fuel-injection hose can also be used in low-pressure applications, but the difference in pricing may convince you to save it for where it is needed.
What is the rating of marine fuel hose?
Marine hose must have the SAE J1527 Style R1 rating emblazoned on the hose to pass as seaworthy. Marine hose is rated for 40 psi and will work in a pinch for carbureted passenger cars and light trucks.
What temperature can a fuel hose withstand?
When a bent filler neck hose is necessary, wire-inserted fuel hose is also offered. It bears the SAE 30R5 rating and can withstand temperatures of -40 to 212 degrees. Working pressure is not relevant, but wire-inserted hose can withstand 50-85 psi, depending on diameter.
What is the color of tygon?
Small engines on your lawnmower, ATV or motorcycle use a gas-resistant vinyl tubing called Tygon. It is usually clear or transparent yellow in color and is preferred over the clear vinyl tubing you can purchase for your beer keg tap or for use as a wiring loom. Tygon is available in short sections or on a large roll and can be quite expensive, but it will outlast the standard vinyl by many years and does not turn brown and brittle after extended use, as vinyl tubing often does.
What causes water contamination in fuel cells?
What causes water contamination in a fuel cell is the condensation that does and can form in the empty portion of the tank itself and it occurs no matter what fuel you use. With gasoline, the water instantly separates and creates a layer of water, with ethanol blends, it will absorb up to a certain amount.
What is fuel line?
Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.
How much water can an E10 hold?
E10 for instance, can hold up to 4 teaspoons per gallon before any separation or problem occurs. The more ethanol you have, the more water you could hold without issue. However, if you have more than 4 teaspoons per gallon from condensation you have a bigger problem like the fuel cell cap being faulty.
Does antifreeze hurt rubber hoses?
Antifreeze shouldn't hurt the rubber hose since they also fill tires/tubes with antifreeze for ballast.
Does a traditonal parts store have a hose?
I would think a traditonal parts store would have that hose. You might consider adding a petcock valve where the hose fitting screws into the radiator too if it doesn't have one now.
Is there a petcock valve between the radiator and the hose?
I'm surprised there isn't a petcock valve between that hose and the radiator. If so I wouldn't be concerned but if not my concern would be cemical compatibility and the coolant eating through the hose as you mentioned.
