How do you gel stain a Fibreglass door?
1:2011:34Gel Staining Fiberglass Doors. How to use Gel Stains. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's going to apply a thin coat with a nice soft brush. And then once you get a nice thinMoreAnd there's going to apply a thin coat with a nice soft brush. And then once you get a nice thin coat applied. We're using a rag to begin removing the gel stain til we get to the color.
What kind of stain do you use on fiberglass?
Use a high quality, heavily pigmented, oil-based stain (recommended). Gel stains can also be used. Before starting, and occasionally throughout the project, stir the stain until the texture is creamy.
Can you put stain on fiberglass door?
If you kick a fiberglass door, it won't dent or ding. Plus, unlike a steel door it looks exactly like wood, and you can stain it (although it's a little more complex than staining a wood door). Even though fiberglass is a bit more expensive, it was actually more affordable than a new wood door with a storm door added.
How long does it take for gel stain to dry on fiberglass?
Gel stains give that natural wood finish to your fiberglass doors. Although gel stains work well for fiberglass doors, the drying time is critical. You will need to wait for at least 8 to 12 hours before the stain dries completely.
Is it better to stain or paint a fiberglass door?
Fiberglass front doors exposed to strong sunlight should be finished with paint, not stain. Textured front fiberglass doors look better when stained, however, either finish can be used. If your preference is a look of wood rather than fiberglass, staining can be used to accomplish this.
Is gel stain for exterior?
Old Masters Gel Stain is a highly pigmented, oil-based stain designed to achieve intense colors on interior and exterior wood, fiberglass, primed metal, and composition surfaces.
How do you make fiberglass look like wood?
If you have a drab fiberglass door in your living room, give it a quick, inexpensive facelift. Clean the door to remove grease and dirt. Apply a base coat using either paint or stain. Then use a quality gel stain and a wood-graining tool to create faux wood grain in the door.
How do you refinish a faded fiberglass door?
0:482:40How to restore a faded fiberglass door with gel stain - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the gel stain to the fiberglass. Surface every once in a while step back from the door. MakeMoreApply the gel stain to the fiberglass. Surface every once in a while step back from the door. Make sure it's going on in a uniform manner.
Can I use gel stain on exterior door?
Although the General Finishes company does not recommend their gel stain be used for exterior applications, I've had excellent results using it on my exterior front door in combination with their Exterior 450 top coat.
Do you need to seal gel stain?
The high urethane content of General Finishes Gel Stains results in a lustrous finish that tends to fool people into assuming no sealant is required. The beauty of Gel Stain comes from the thick urethane which can carry a LOT of color to any surface, but that color must be sealed in with top coat.
Can you use wood stain on a fiberglass door?
If a stained wood appearance is desired on wood-grain fiberglass door panels, sidelights and glass frames, apply gel stain and clear finish according to the stain manufacturer's directions. For best results, always apply stain in the direction of the grain. Be sure to finish door edges. Stir stain well.
What stain is best for fiberglass door?
Gel-based stains: Gel stains work best with fiberglass doors because they require less preparation and are thicker in texture. They adhere well even if the surface on which you're going to apply them isn't completely sanded down.
Can you stain a fiberglass door to look like wood?
If you have a drab fiberglass door in your living room, give it a quick, inexpensive facelift. Clean the door to remove grease and dirt. Apply a base coat using either paint or stain. Then use a quality gel stain and a wood-graining tool to create faux wood grain in the door.
How do you Restain a fiberglass exterior door?
0:482:40How to restore a faded fiberglass door with gel stain - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the gel stain to the fiberglass. Surface every once in a while step back from the door. MakeMoreApply the gel stain to the fiberglass. Surface every once in a while step back from the door. Make sure it's going on in a uniform manner.
What is gel stain?
Gel stains are thick stain that you apply to a wood surface. Unlike traditional stains that soak into the wood creating a new color, gel stains are applied to the surface of wood and can be built up similar to a paint. Unlike paint, gel stains still allow you to feel the underlying texture of the wood.
How to get gel stain off a door?
Wet a clean rag with mineral spirits and wipe down the entire surface of the door. Dirt, dust and grime can make the gel stain apply unevenly or not adhere properly to the door, resulting in splotches and streaks. Let the door air dry for 20 to 30 minutes, then cover any areas that you will not be staining with quality painter's tape. If the door has a glass insert, cover it with plastic wrap and secure it with tape.
How long does it take for a gel stain to dry?
Once the raised areas are stained, start applying the product to the rest of the door. Let this dry for at least six hours or the amount of time indicated by the manufacturer of the gel stain.
How long does it take for a stained door to dry?
Let this dry for at least six hours or longer , depending on the product directions, then apply a coat of clear urethane.
Applying gel stain to a fiberglass door
My mother recently purchased a woodgrain fiberglass door and would like me to help her stain it. Is there any particular gel stain that works better than others? She would like it to be a burgandy/ mohagany color.
Comments (9)
My name is Christine and I work in the paint department at The Home Depot in Atlanta. I love gel stains! Using it for your door will work out really well for you.
How do I stain fiberglass doors?
Put your paintbrush into the gel stain, so that the liquid covers the tip of the brush. Don't stick the whole brush into the tin, as this will cause it to become saturated with heavy stain, which will then make your fiberglass doors look heavy. Add the first layer of stain by painting quickly and evenly across the surface of the door, following the same direction (up and down or side to side) in order to make the door have a wood grain effect .
How do I remove weather stripping from a door?
Step 1 - Remove the Door Furniture. Take all of the hardware off of your door, including door knobs, hinges and other door furniture. You should also take this opportunity to take off the weather stripping from around the frame, and remove any found at the bottom of the door. This will help to keep the stripping clean while you stain ...
Why are fiberglass doors so popular?
Fiberglass doors are great additions to the home because if they are taken care of they can last for decades. They are durable and can be bought with a wood grain, thereby giving off the elegance of wooden front doors but with the longevity of fiberglass.
Can you seal fiberglass doors with polyethylene?
In addition to the stain, you will always want to seal it with a layer of polyethylene. When you do, make sure the polyethylene is also oil-based. Not every oil-based stain on the market will do the job of covering fiberglass doors. It has to be high quality so do not cut corners by using a cheap brand. The stain also has to be opaque in nature.
Can you use gel stain on fiberglass doors?
Many people that stain fiberglass doors as part of their job often use gel stains with much trepidation. Even though manufacturers say that gel stains work on fiberglass, there are some problems with them. Stains work because they have something to latch on to and bond to the door. Fiberglass doors do not accept added moisture, which is why they make great doors. Gel stains are very fickle and require great care to apply to fiberglass doors. The main trick to applying a gel stain is to follow the instructions precisely that are on the can. The directions for gel stain application can vary depending on the manufacturer so do not assume all gel stains are the same.
Can you use semi transparent stain on fiberglass doors?
Stains that are transparent or semi-transparent cannot be used on fiberglass doors that aren't textured. The idea behind these stains is that they add a layer of color to a wood door so that the natural grain can still be seen. Fiberglass doors do not have a wood grain or a porous texture that can absorb the stain.
What is the best way to protect a stained door?
The clear coat will seal in the fresh stain, preserving its rich color and protecting it from du st, dirt, and damage. If you're staining an exterior door, select an outdoor varnish that will hold up to regular exposure to sunlight, precipitation, and extreme temperatures.
What is gel stain?
Gel stains are thicker and creamier than other types of stains, which makes them better able to adhere to smooth synthetic materials and gives them a bold, uniform appearance. Look for gel stains in the pain aisle of your local home improvement center or hardware store. Gel stains are available in a variety of shades.
How to get a deep color on a door?
Start by removing the door from its hinges and stripping it of all knobs, locks, and other hardware. Wipe the door with mineral spirits to cut any existing dirt or grime, then apply a generous amount of gel stain and wipe until you get the desired depth of color.
How long does it take for a stain to dry?
It's possible for environmental conditions like high humidity and poor airflow to interfere with drying stains. If the stain hasn't dried within about 5 days, you'll often have no choice but to strip it and start over.
How long does it take to remove a stain from a door?
Allow the door to dry completely before moving on to applying the stain—this should only take 2-3 minutes. A thorough wipedown will lift away any lingering dirt, dust, or grime that might prevent the new coat of stain from adhering.
How to stain a door with a saw?
Place the door on an elevated surface. Lay the door on a level workbench or craft table, or situate it between two sawhorses. Doing your staining on a higher surface will spare your knees and back the discom fort of bending or stooping for long periods of time.
How long does it take to finish a door?
Since you'll have to stain and seal the door one side at a time, the entire finishing process may take up to 4-5 days. ...
Suggested Supplies
Gel Stain Interior or exterior clear finish Mineral spirits 2” natural bristle brush 2” foam brush Latex gloves Clean, lint-free cloth (for removing excess stain) Stir stick
Additional Supplies
These instructions are designed for use on all fiberglass, carbonite, composition, and other simulated wood grain surfaces, as well as stainable door frames.
Before You Begin
Thoroughly read and follow all the instructions as printed in this brochure and carefully read through product labels.
Step One
Stir the stain thoro- ughly to ensure color consistency. Using the 2” foam brush, apply
Step Two
With the cloth provided, remove excess stain from the coated area. Concentrate on wiping
Step Three
Gently brush out streaks or lap marks left behind using the 2” bristle brush.
Step Four
drying conditions before topcoating the stained door. (Refer to the instructions on the back of the polyurethane label.) Using the 2” bristle brush (or equivalent), brush in the direction of the grain. Apply in the same sequence as the stain application.
Best Gel Stain for Exterior Fiberglass Door
I'm in the process of building a home and we've ordered a fiberglass front door. Is Minwax gel stain my best option? I've also seen some good reviews on Old Masters gel stain. Of course cost is a consideration, but more important is the quality and ease of application so it looks as close to real wood as possible.
Comments (5)
General Finishes or Old Masters are both quality, Minwax not so much. be careful as they are not the easiest finish to use.
