What are the pros of using a baseboard heater?
Cut back on winter heating costs by using your system efficiently
- Baseboard heaters are often located under windows because it's more efficient that way. ...
- Heat rises – and so do your energy costs, for every degree above 20°C. ...
- Cranking the thermostat doesn't warm up the room any faster. ...
- Now that they're more widely available, you can get a smart thermostat that works with baseboard heaters. ...
Which PEX to use for heating/ domestic?
【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemical environment. . . . . Three types of Pex A expansion fittings to meet your different needs.
What are the advantages of baseboard heating?
What is a Baseboard Heater?
- Lower Energy Bills. The number one benefit you will receive from baseboard heaters is saving money on your energy bills.
- Perfect for “Hard to Keep Warm” Rooms. There are certain areas around your home that are notoriously difficult to keep warm. ...
- Supplemental Home Heating. ...
- Portable & Easy-to-Plug In Anywhere. ...
How to replace copper pipes using PEX?
- Installing PEX does not require soldering as does copper and galvanized steel.
- PEX expands, making it more resistant to freeze-cracking than either copper or steel.
- PEX does not corrode, which can happen with both copper and steel pipes, leading to leaks and contamination of the water supply.
What temperature does pex expand?
Can you use pex to connect baseboard?
Can you run PEX for baseboard heat?
500ft roll of 3/4" Oxygen Barrier PEX Tubing for use in hydronic (baseboards, radiators), radiant heating and snow melting systems. Certified for use in radiant floor heating applications. 3/4" PEX Tubing with Oxygen Barrier is the most popular size for all snow melt projects.
Can you use SharkBite fittings on hot water baseboard?
Hello, All brass SharkBite push-to-connect fittings are suitable for use with radiant and hydronic heating applications as long as the temperature does not exceed 200 degrees Fahrenheit and the pressure does not exceed 200 psi.
Can you use PEX tubing on a hot water heating system?
Yes, PEX pipe is approved for radiant or hydronic heating applications.
Can PEX handle hot water?
PEX is totally great at handling hot water! PEX does not melt (analogous to elastomers) and is thermally resistant. The maximum heat temperature of the PEX tube is 200 degrees. The maximum heat of the PEX can be up to 180 degrees.
Do professional plumbers use SharkBite?
When and when not to use SharkBite fittings. Most professional plumbers believe that SharkBite fittings and other kinds of push-fit fittings should only be used as an emergency, temporary fix, and not for any enclosed or permanent plumbing system. However, there is a growing selection of DIYers who would disagree.
Are shark bites as good as solder?
These groups of home owners feel SharkBite fittings are just as strong as soldering. A few of the criticisms of SharkBite and other push-fit fittings consist of; initially, push-fit fittings do not have the trustworthiness that soldering has. Soldering has actually been around much longer than push-fit fittings.
Is Blue PEX OK for hot water?
Color-Coded: Red PEX pipes can be used for hot water supply lines, blue PEX for cold water supply, and white for either hot or cold.
Is White PEX OK for hot water?
White PEX pipe can be used for either hot or cold water. Gray PEX pipe, like white, can be used for either hot or cold water (although not all DIY centers carry gray).
Can plastic PEX fittings be used for hot water?
Metal fittings are required, however, where the fitting is exposed to UV light. Also, no plastic pipe or fittings can be used within 18 in. of water heating devices. Check your local building code in case there are other requirements where you live.
What temp does PEX burst?
If the weather reports temperatures will hit 20 degrees or lower - this is your alert to take the following steps to keep your pipes from freezing and eventually bursting. If your pex pipes are in your garage - keep your garage doors closed to retain as much heat as you can inside your garage.
How far does PEX need to be from water heater?
18 inchesPEX shall not be installed within the first 18 inches (457 mm) of piping connected to a water heater.
How hot can PEX handle?
PEX tubing can be used up to 200° Fahrenheit for heating applications. For plumbing, PEX is limited to 180° F at 100 psi.
Can SharkBite fittings be used on hot water heater?
Yes, you can use SharkBite fittings on hot water lines. Remember, however, that they only work with copper, PEX, and CPVC pipes.
Can you use push fit for hot water?
Push fit fittings and pipes, like copper, can safely withstand heat and pressure so they're suitable for water and heating systems.
How long do SharkBite connections last?
SharkBite fittings last a long time. In fact, SharkBite warrants the fittings for 25 years when used with SharkBite tubing.
How reliable are SharkBite fittings on copper pipe?
SharkBites work better than plastic quick-connects on copper pipes because the lead-free brass body is rigid like the pipe and has a higher pressure tolerance. If you need to repair or replace copper plumbing in your home, a SharkBite fitting is an excellent choice.
Connecting Baseboard to Pex — Heating Help: The Wall
PEX crimp fittings should generally be avoided in hydronic systems because they choke flow and allow O2 ingress into the system. Also, O2 barrier PEX is essential for the same reason.
Using PEX for baseboard heat - DoItYourself.com Community Forums
Plumbing and Piping - Using PEX for baseboard heat - FYI--I originally posted this in the boiler heat forum ( Extending Baseboard heat using PEX back to copper) but maybe this is the appropriate forum I have baseboard heat in my home. There is a section in my rec room ( 40 below grade) that I would like to modify.
Using PEX for baseboard run - Home Improvement Stack Exchange
Unless you have an odd system (bronze or stainless pumps, stainless boiler or heat exchanger) you will need Oxygen Barrier PEX - which , not surprisingly, is the stuff that's typically sold for heating applications. If you use oxygen barrier pex, it should work fine.
Connecting baseboard to ¾” pex - Plbg.com
Re: Connecting baseboard to ¾” pex; Author: packy (MA) i won't use anything else for baseboard heat but 3/4" fosta-pex. it doesn't make noise if it rubs against wood. i drill 1-1/2" holes in the floor. i use a copper tubing expander tool to shove inside the pex. the tool is not to expand the pex but it fits snugly inside to make bending the pex into position easy. the tool is stepped in ...
Can you use PEX for hot water baseboard heat?
A: Oxygen barrier type PEX pipe has an external polymer coating called EVOH or “oxygen diffusion barrier” and it’s the type used for all standard closed loop heating applications, including floor heating, baseboard/radiator heating and snow melting.
Can you use PEX tubing for radiant floor heat?
Oxygen Barrier and PEX-AL-PEX tubing are intended for heating applications (radiant floor heat, baseboards, etc.) Non-Barrier PEX is intended for hot and cold domestic water use. Click to see full answer. In respect to this, can I use SharkBite on baseboard heat?
What temperature does pex expand?
pex along the top of the element like that would really expand when it goes from room temperature to 180°F or more!
Can you use pex to connect baseboard?
Pex for baseboard. yes you can use it to connect baseboard. just watch the temp rating of whichever tube you're using. Make sure your water temps won't exceed this rating. Pex tends to get all snakey and wants to come out of the baseboard enclosure when it gets hot.
Why use copper baseboard?
They use copper in baseboards for a reason - it has high thermal conductivity. PEX will do a poor job of transferring heat to the fins/air when compared to copper. You can use PEX to plumb between radiators.
Can you rent expansion tools?
Expansion tool may be hard to find but a lot of supply houses do rent the tool.
Can you run PEX 5/8 in 3/4 copper?
In general, 5/8" PEX will feed loops that would normally be run in 3/4" copper. You'll also need the correct fittings to interface the PEX to the baseboard. Yes, but the heat transfer properties and operating temperatures are different.
Can you use PEX tubing for heating?
Yes , you can. You'll want to use a PEX tubing with an oxygen barrier meant for heating, like Wirsbo's HePex. You'll also want to pay attention to the size of the tubing, the length of the run, and the amount of radiation on the loop so that you can size the tubing properly.
Does PEX release heat?
PEX will not have the same character istics as copper when used to release heat to the environment but yes, it WILL release heat. Insulating the PEX where it runs through the concrete is a good idea but probably not necessary when it runs through a conditioned space.
Can you use PEX to make sharkbite?
Yes, you may use PEX but I would run it through a PVC or PE pipe sleeve rather than embed it in the concrete. I would use soldered adapters because I think that sharkbites are horrendously expensive.
Can you buy Pex to Copper fittings?
You can buy pex to copper fittings that crimp on the pex. My question in open air will pex give off as much heat as copper? Or are you just using the pex as a transmittal device to a heater core?
What temperature does pex expand?
pex along the top of the element like that would really expand when it goes from room temperature to 180°F or more!
Can you use pex to connect baseboard?
Pex for baseboard. yes you can use it to connect baseboard. just watch the temp rating of whichever tube you're using. Make sure your water temps won't exceed this rating. Pex tends to get all snakey and wants to come out of the baseboard enclosure when it gets hot.
