Knowledge Builders

can you use pex for washing machine

by Jules Wilderman DVM Published 3 years ago Updated 2 years ago
image

The SharkBite PEX barb washing machine box provides quick and safe water supply shutoff for washing machines and connects to PEX pipe with either a stainless steel clamp or copper crimp ring system.

Full Answer

Can I use PEX fittings directly into my washing machine?

I ask because hoses are regarded as a poinit of with a high likely hood of failure. Given PEX and PEX fittings tolerance to bending, freezing, and their ease of rotation around a joint, it seems like PEXing directly into my washer would be preferred vs spending $100+ on fittings, valves and hoses to do it the traditional way.

What is a PEX water line?

Cross-linked polyethylene (PEX) is flexible plastic used to create plumbing lines that can replace traditional metal water supply lines. It's common in new construction, and homeowners often switch to PEX when they remodel.

Can you use PEX for hammer arrestors?

Water hammer arrestors don't need any maintenance and attach easily to the plumbing. Cross-linked polyethylene (PEX) is flexible plastic used to create plumbing lines that can replace traditional metal water supply lines. It's common in new construction, and homeowners often switch to PEX when they remodel.

Do PEX pipes get water hammer?

If you've ever dealt with water hammer, you're familiar with the loud, sudden banging it causes. While this effect is most prominent in copper pipes, other types of plumbing pipes, including PEX pipes, also experience water hammer.

Why does my Pex machine jump around?

Is it a good idea to have a washer hose fail?

About this website

image

Is 1 2 PEX enough for washing machine?

Water Pressure Other fixtures that benefit from 1/2-inch lines are washing machines and dishwashers. Sinks and showers are water guzzlers, and you can conserve by running 3/8-inch lines to them. Because the rate at which a commode tank refills is usually not important, it's okay to run 3/8-inch line there as well.

Where should you not use PEX?

You can't install PEX in high heat areas like near recessed lighting. This also means you can't connect PEX directly to a hot water heater, but you can use a connecting material to do this. PEX is semi-permeable, which means liquid can enter the pipe. When it comes to safety, PEX isn't antibacterial.

Why is PEX not allowed?

Rodent Risk Factors While pest experts don't know whether rodents chew through PEX to get to the water inside or simply because it's there, PEX and rodents can be a dangerous combination. Local building codes in some communities may not permit the installation of PEX if rodent infestations are common.

Can I use PEX for water supply line?

PEX is a flexible pipe made from cross-linked polyethylene, a special kind of plastic. In a short time, it has become very popular for water supply lines and is expected to replace copper almost entirely on these installations. The reasons are simple: PEX is less expensive and much simpler to install.

Do plumbers like PEX?

All this makes PEX an excellent piping material for hot and cold water systems, especially since it is flexible and well adapted for temperatures below freezing all the way up to 200 degrees Fahrenheit. PEX is easy for plumbers to install and has fewer joints, bringing your costs down.

Can rats eat through PEX pipe?

PEX Pipe Is Vulnerable Rodents Chewing Through PEX Pipe is a common problem in our area. It doesn't matter how old your home is, if you have an attic, you need to watch for rodent damage to PEX Pipe or PVC. If you're hearing rustling noises coming from the attic, it's time to do an inspection.

Can bacteria grow in PEX?

PEX pipe showed a higher growth of coliform bacteria than copper pipe [42]. The levels of released metal from plastic pipes were monitored in five pipe systems, PB, PVC, PP, PE, and cPVC. The metal levels in new plastic facilities were not serious except for PVC and cPVC, respectively.

How long will PEX last?

50 yearsPEX: Due to its flexibility and durability, PEX piping should last at least 50 years. PVC / CPVC: Under typical conditions, these pipes should last up to 100 years. Keep in mind that PVC pipes are often used for drainage because extreme heat can damage them.

Can I use PEX for shower plumbing?

Use threaded PEX water line fittings for shower valves. Tighten the fittings before crimping the PEX water line. A plastic bracket forms the sharpest 90-degree angle permitted for this brand of PEX.

How long does PEX last vs copper?

It's tough to beat copper pipes for longevity, which on average last 50 to 70 years, compared to PEX, which has an expected lifespan of 30 to 50 years.

What is white PEX used for?

Color-Coded: Red PEX pipes can be used for hot water supply lines, blue PEX for cold water supply, and white for either hot or cold. These colors are just for your convenience.

Is PEX better than PVC?

When a connection to copper or other metal pipes is required, PEX works better than PVC because crosslinked polyethylene won't corrode. - Price. When you compare the material costs of PEX vs PVC, PEX comes out more expensive. (However, balance this factor against the lower labor cost to install PEX.)

What are the disadvantages of PEX?

The biggest disadvantage to PEX is that it is unknown how well or long it will last. While PEX piping is warrantied for up to 25 years, it is unknown what could happen to PEX piping as the years go on. Since it is so new, it is hard to know what water will do to the plastic over 30 years.

Can you run PEX off a hot water heater?

Can I Connect PEX to My Water Heater? PEX can't be directly connected to a water heater.

Can I use PEX for bathroom sink?

PEX has several advantages over traditional copper pipes: it costs less to manufacture and is simpler to cut and connect. It also resists rust and corrosion and can carry hot or cold water to sinks, showers, toilets and many other fixtures.

Should I replace copper with PEX?

While copper is an excellent material, no material is perfect. You can develop some problems with your copper pipes, and PEX is often a great replacement that can eliminate these problems. Keep hot water hot: PEX keeps the water warmer as it flows through the pipe so that you get hotter water on the other end.

Is PEX fine for washers?

1/2" PEX is fine for the washer. I install my washers using hammer arrestors.

Is 3/4" PEX the same as 1/2" copper?

CPVC and PEX both have a smaller inside diameter than copper of the same size, 3/4" of these materials are about the same a 1/2" copper, so I think you might want to run 3/4" PEX rather than the 1/2". When you turn off the cold water supply to the water heater, no more hot water will enter the supply system. There will be some water left in the ...

What is PEX plumbing?

PEX plumbing is also known as crosslinked polyethylene, which is a compressed plastic material that is both durable and corrosion resistant . PEX plumbing is rated to carry both hot and cold potable water, unlike traditional PVC pipe, which is limited to carrying only non-potable cold water. PEX plumbing attaches to devices using copper crimp rings or push-style fittings that are compatible with PEX, copper or CPVC pipe. PEX is more affordable than copper pipe, with many of the same benefits.

How does a PEX water hammer attach?

Instead, a PEX arrestor typically will attach by pushing one end of the water pipe into the fitting and continuing the line out the other side of the arrestor. Some PEX water hammer arrestors attach using a crimp ring, but these require additional tools and plumbing experience to attach.

Can you use a water hammer arrestor on PEX?

Water hammer arrestors can be installed on PEX plumbing. If you ever hear a loud, banging noise inside your plumbing, chances are that water hammer is to blame. The phenomenon is potentially destructive to your pipes over time and should be managed using a device known as a water hammer arrestor.

Why does my Pex machine jump around?

Pex, being stiff, may want to jump around a bit when the machine opens and closes its internal valves. This could cause some slapping behind the machine. You might need to secure the lines to prevent them doing so.

Is it a good idea to have a washer hose fail?

I think it's a good idea, though I've never seen a washer hose fail (" high likelihood" is probably still point-zero-zero-something percent per year). Some caveats:

image

1.plumbing - Can I run PEX directly into my clothes washer?

Url:https://diy.stackexchange.com/questions/152583/can-i-run-pex-directly-into-my-clothes-washer

6 hours ago  · Yes. PEX is an excellent material for water supply lines in a home, including those in a washing machine. It’s strong, durable, and resistant to corrosion. Best of all, it’s easy to …

2.Pex washing machine hook ups part 1 - YouTube

Url:https://www.youtube.com/watch?v=Vj_me-s1Kzc

36 hours ago Can you use PEX for washing machine? 1/2″ PEX is fine for the washer. 1/2 Pex will work fine, but 3/4 will give you almost 50% more avalible CFM. What height should a washing machine outlet …

3.Easy Pex Laundry Box - YouTube

Url:https://www.youtube.com/watch?v=UB4aPU-xJl8

13 hours ago With all the improvements made to these pipes, you can use PEX pipes for your vast appliances like a washing machine. However, it would help if you did not connect the line directly to the …

4.Washer Supply Pipe Size Question | Terry Love Plumbing …

Url:https://terrylove.com/forums/index.php?threads/washer-supply-pipe-size-question.49883/

24 hours ago Oatey® Eliminator® Viega PEX Press Washing Machine Outlet Boxes. The Oatey® Eliminator® Washing Machine Outlet Box is designed for commercial or residential applications that …

5.Do I Need Hammer Arrestors in My PEX Plumbing? | Hunker

Url:https://www.hunker.com/12604347/do-i-need-hammer-arrestors-in-my-pex-plumbing

30 hours ago  · Jan 8, 2013. #3. 1/2" is fine for a washer. That is fine for PEX, CPVC, Copper and galvanized. Normally you have a main cold water shutoff for a home, and the cold feed shutoff …

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9